Miniature Circuit Breaker

Product Details:

General Information

• Extended Product Type:TA110DU-90
• Product ID:1SAZ411201R1001
• Catalog Description:TA110DU-90 Thermal Overload Relay
• Long Description:The TA110DU-90 thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10A. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function and a trip indication. The overload relays are connected directly to the block contactors. Single mounting kits are available as accessory.

Dimensions

• Product Net Width:80 mm
• Product Net Height:120 mm
• Product Net Depth:120 mm
• Product Net Weight:0.75 kg

Specification

• Setting Range:65 ... 90 A
• Rated Operational Voltage:Auxiliary Circuit 440 V DC
  Auxiliary Circuit 500 V AC
  Main Circuit 690 V AC
• Rated Operational Current (Ie):90 A
• Rated Operational Current AC-3 (Ie):90 A
• Rated Frequency (f):Auxiliary Circuit 50 Hz
  Auxiliary Circuit 60 Hz
  Auxiliary Circuit DC
  Main Circuit 60 Hz
  Main Circuit 50 Hz
  Main Circuit DC
• Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV
  Main Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Number of Poles:3
• Number of Auxiliary Contacts NC:1
• Number of Auxiliary Contacts NO:1
• Number of Protected Poles:3
• Conventional Free-air Thermal Current (Ith):Auxiliary Circuit NC 5 A
  Auxiliary Circuit NO 5 A
• Rated Operational Current AC-15 (Ie):(120 V) NC 3 A
  (120 V) NO 1.5 A
  (240 V) NC 3 A
  (240 V) NO 1.5 A
  (400 V) NC 1.9 A
  (400 V) NO 1 A
  (440 V) NC 1 A
  (440 V) NO 1 A
  (500 V) NC 1 A
  (500 V) NO 1 A
• Rated Operational Current DC-13 (Ie):(125 V) NC 0.25 A
  (125 V) NO 0.25 A
  (24 V) NC 1.25 A
  (24 V) NO 1.25 A
  (250 V) NC 0.12 A
  (250 V) NO 0.04 A
  (60 V) NC 0.25 A
  (60 V) NO 0.25 A
• Degree of Protection:Housing IP20
  Main Circuit Terminals IP10
• Pollution Degree:3
• Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²
  Flexible 1/2x 0.75 ... 2.5 mm²
  Rigid 1/2x 0.75 ... 4 mm²
• Connecting Capacity Main Circuit:Flexible 1x 16 ... 35 mm²
  Rigid 1x 16 ... 35 mm²
• Tightening Torque:Auxiliary Circuit 1 ... 1.3 N·m
  Main Circuit 7.2 ... 9.6 N·m
• Wire Stripping Length:Auxiliary Circuit 9 mm
  Main Circuit 25 mm
• Recommended Screw Driver:Auxiliary Circuit Pozidriv 2
  Main Circuit Hexagon 4
• Mounting Position:Position 1 to 4
• Power Loss:at Rated Operating Conditions per Pole 2.4 ... 4.5 W
• Suitable For:A95
  A110
  AE95
  AE110
• Standards:IEC/EN 60947-1
  IEC/EN 60947-4-1
  IEC/EN 60947-5-1
  UL 60947-1
  UL 60947-4-1

Environmental

• Ambient Air Temperature:Operation -25 ... +55 DegreeC
  Operation Compensated -25 ... +55 DegreeC
  Storage -40 ... +70 DegreeC
• Ambient Air Temperature Compensation:Yes
• Maximum Operating Altitude Permissible:2000 m
• Resistance to Shock acc. to IEC 60068-2-27:11 ms Pulse 12g
• RoHS Status:Following EU Directive 2011/65/EC

Request
Callback

Additional Information:

• Item Code: 1SAZ411201R1001
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type:TA200DU-90
• Product ID:1SAZ421201R1001
• Catalog Description:TA200DU-90 Thermal Overload Relay
• Long Description:The TA200DU-90 thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10A. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function and a trip indication. The overload relays are connected directly to the block contactors. Single mounting kits are available as accessory.

Dimensions

• Product Net Width:104 mm
• Product Net Height:151 mm
• Product Net Depth:126 mm
• Product Net Weight:0.755 kg

Specification

• Setting Range:66 ... 90 A
• Rated Operational Voltage:Auxiliary Circuit 440 V DC
  Auxiliary Circuit 500 V AC
  Main Circuit 690 V AC
• Rated Operational Current (Ie):90 A
• Rated Operational Current AC-3 (Ie):90 A
• Rated Frequency (f):Auxiliary Circuit 50 Hz
  Auxiliary Circuit 60 Hz
  Auxiliary Circuit DC
  Main Circuit 60 Hz
  Main Circuit 50 Hz
  Main Circuit DC
• Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV
  Main Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Number of Poles:3
• Number of Auxiliary Contacts NC:1
• Number of Auxiliary Contacts NO:1
• Number of Protected Poles:3
• Conventional Free-air Thermal Current (Ith):Auxiliary Circuit NC 5 A
  Auxiliary Circuit NO 5 A
• Rated Operational Current AC-15 (Ie):(120 V) NC 3 A
  (120 V) NO 1.5 A
  (240 V) NC 3 A
  (240 V) NO 1.5 A
  (400 V) NC 1.9 A
  (400 V) NO 1 A
  (440 V) NC 1 A
  (440 V) NO 1 A
  (500 V) NC 1 A
  (500 V) NO 1 A
• Rated Operational Current DC-13 (Ie):(125 V) NC 0.25 A
  (125 V) NO 0.25 A
  (24 V) NC 1.25 A
  (24 V) NO 1.25 A
  (250 V) NC 0.12 A
  (250 V) NO 0.04 A
  (60 V) NC 0.25 A
  (60 V) NO 0.25 A
• Degree of Protection:Housing IP20
  Main Circuit Terminals IP00
• Pollution Degree:3
• Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²
  Flexible 1/2x 0.75 ... 2.5 mm²
  Rigid 1/2x 0.75 ... 4 mm²
• Connecting Capacity Main Circuit:Hole Diameter > 10 mm²
  Rigid or Flexible with Cable Lug 1x 25 ... 120 mm²
• Tightening Torque:Auxiliary Circuit 1 ... 1.3 N·m
  Main Circuit 25 N·m
• Wire Stripping Length:Auxiliary Circuit 9 mm
• Recommended Screw Driver:Auxiliary Circuit Pozidriv 1
  Main Circuit Open Bars
• Mounting Position:Position 1 to 6
• Power Loss:at Rated Operating Conditions per Pole 2.4 ... 4.5 W
• Suitable For:A145
  A185
  AF145
  AF185
  AF190
  AF205
• Standards:IEC/EN 60947-1
  IEC/EN 60947-4-1
  IEC/EN 60947-5-1
  UL 60947-1
  UL 60947-4-1

Environmental

• Ambient Air Temperature:Operation -25 ... +55 °C
  Operation Compensated -25 ... +55 °C
  Storage -40 ... +70 °C
• Ambient Air Temperature Compensation:Yes
• Maximum Operating Altitude Permissible:2000 m
• Resistance to Shock acc. to IEC 60068-2-27:11 ms Pulse 12g
• RoHS Status:Following EU Directive 2011/65/EC

Request
Callback

Additional Information:

• Item Code: 1SAZ421201R1001
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type:TA110DU-110
• Product ID:1SAZ411201R1002
• Catalog Description:TA110DU-110 Thermal Overload Relay
• Long Description:The TA110DU-110 thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10A. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function and a trip indication. The overload relays are connected directly to the block contactors. Single mounting kits are available as accessory.

Dimensions

• Product Net Width:80 mm
• Product Net Height:120 mm
• Product Net Depth:120 mm
• Product Net Weight:0.755 kg

Specification

• Setting Range:80 ... 110 A
• Rated Operational Voltage:Auxiliary Circuit 440 V DC
  Auxiliary Circuit 500 V AC
  Main Circuit 690 V AC
• Rated Operational Current (Ie):110 A
• Rated Operational Current AC-3 (Ie):110 A
• Rated Frequency (f):Auxiliary Circuit 50 Hz
  Auxiliary Circuit 60 Hz
  Auxiliary Circuit DC
  Main Circuit 60 Hz
  Main Circuit 50 Hz
  Main Circuit DC
• Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV
  Main Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Number of Poles:3
• Number of Auxiliary Contacts NC:1
• Number of Auxiliary Contacts NO:1
• Number of Protected Poles:3
• Conventional Free-air Thermal Current (Ith):Auxiliary Circuit NC 5 A
  Auxiliary Circuit NO 5 A
• Rated Operational Current AC-15 (Ie):(120 V) NC 3 A
  (120 V) NO 1.5 A
  (240 V) NC 3 A
  (240 V) NO 1.5 A
  (400 V) NC 1.9 A
  (400 V) NO 1 A
  (440 V) NC 1 A
  (440 V) NO 1 A
  (500 V) NC 1 A
  (500 V) NO 1 A
• Rated Operational Current DC-13 (Ie):(125 V) NC 0.25 A
  (125 V) NO 0.25 A
  (24 V) NC 1.25 A
  (24 V) NO 1.25 A
  (250 V) NC 0.12 A
  (250 V) NO 0.04 A
  (60 V) NC 0.25 A
  (60 V) NO 0.25 A
• Degree of Protection:Housing IP20
  Main Circuit Terminals IP10
• Pollution Degree:3
• Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²
  Flexible 1/2x 0.75 ... 2.5 mm²
  Rigid 1/2x 0.75 ... 4 mm²
• Connecting Capacity Main Circuit:Flexible 1x 16 ... 35 mm²
  Rigid 1x 16 ... 35 mm²
• Tightening Torque:Auxiliary Circuit 1 ... 1.3 N·m
  Main Circuit 7.2 ... 9.6 N·m
• Wire Stripping Length:Auxiliary Circuit 9 mm
  Main Circuit 25 mm
• Recommended Screw Driver:Auxiliary Circuit Pozidriv 2
  Main Circuit Hexagon 4
• Mounting Position:Position 1 to 4
• Power Loss:at Rated Operating Conditions per Pole 2.5 ... 4.7 W
• Suitable For:A95
  A110
  AE95
  AE110
• Standards:IEC/EN 60947-1
  IEC/EN 60947-4-1
  IEC/EN 60947-5-1
  UL 60947-1
  UL 60947-4-1

Environmental

• Ambient Air Temperature:Operation -25 ... +55 DegreeC
  Operation Compensated -25 ... +55 DegreeC
  Storage -40 ... +70 DegreeC
• Ambient Air Temperature Compensation:Yes
• Maximum Operating Altitude Permissible:2000 m
• Resistance to Shock acc. to IEC 60068-2-27:11 ms Pulse 12g
• RoHS Status:Following EU Directive 2011/65/EC

Request
Callback

Additional Information:

• Item Code: 1SAZ411201R1002
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

Features- Compiles to standards IEC 60947-2 & EN 60898-1- Compact size : One size up to 125A- Compact performance :Selective and back-up characteristics- Does not let go: The interchangeable terminal adapter.Cage terminals or ring lugs- On the safe side: Operating status display.- Simple and flexible: Accessories fitted by the customer- Identical accessories for a broad range of applications

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

General Information

• Extended Product Type:DB25/25A
• Product ID:1SAZ201108R0001
• Catalog Description:DB25/25A Single Mounting Kit
• Long Description:DB25/25A Single monting kit for TA25DU

Dimensions

• Product Net Width:44 mm
• Product Net Height:70.5 mm
• Product Net Depth:85.8 mm
• Product Net Weight:0.055 kg

Specification

• Rated Operational Voltage:Main Circuit 690 V AC
• Rated Operational Current AC-3 (Ie):25 A
• Rated Frequency (f):Main Circuit 50 Hz
  Main Circuit 60 Hz
• Rated Impulse Withstand Voltage (Uimp):Main Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Number of Poles:3
• Pollution Degree:3
• Suitable For:TA25DU
• Standards:UL 60947-1
  UL 60947-4-1

Environmental

• Ambient Air Temperature:Operation -25 … +55 °C
  Storage -40 … +70 °C
• RoHS Status:Following EU Directive 2011/65/EC

Request
Callback

Additional Information:

• Item Code: 1SAZ201108R0001
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information
Extended Product TypeDB25/32AProduct ID1SAZ201108R0002Catalog DescriptionDB25/32A Single Mounting KitLong DescriptionDB25/32A Single monting kit for TA25DU
Dimensions
Product Net Width44 mmProduct Net Height84.5 mmProduct Net Depth85.8 mmProduct Net Weight0.08 kg
Specification
Rated Operational VoltageMain Circuit 690 V ACRated Operational Current AC-3 (Ie)32 ARated Frequency (f)Main Circuit 50 Hz
Main Circuit 60 HzRated Impulse Withstand Voltage (Uimp)Main Circuit 6 kVRated Insulation Voltage (Ui)690 VNumber of Poles3Pollution Degree3Suitable ForTA25DUStandardsUL 60947-1
UL 60947-4-1
Environmental
Ambient Air TemperatureOperation -25 ... +55 DegreeC
Storage -40 ... +70 DegreeCRoHS StatusFollowing EU Directive 2011/65/EC

Request
Callback

Additional Information:

• Item Code: 1SAZ201108R0002
• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

Product Specification:-

• Brand Name : Abb
• Breaking Capacity : 10 KA
• Certificate : IS/IEC 60898-1
• Current Rating : 0.5 A
• Current Rating Ampere : 0.5
• Dielectric Test Voltage : 2kV (50/60 Hz, 1 min)
• Model : SH201M-C 0.5
• Model Text : SH201M-C0.5
• Number Of Poles : 1
• Over Voltage Category : III
• Part Number : 1SYS271011R0984
• Rated Frequency : 50/60 Hz
• Rated Insulation Voltage : 250 V AC (Phase to Ground)
  440 V AC (Phase to Phase)
• Rated Operational Voltage : 230/400/415 V AC
• Rated Short Circuit Capacity : 10kA
• Tripping Characteristic : C

Request
Callback

Additional Information:

• Item Code: 1SYS271011R0984
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Specification

• model:SH200M Series MCBs
• current rating:1.6A,
• No of pole 1Pole / Single Pole / SP
• C curve MCB (trips at 5-10 x Ir)
• Breaking Capacity: 10kA AC
• Operating Voltage: 230/400/415 V AC
• Offers both Overaload and Shortcircuit protection
• Conforms to IS/IEC 60898-1
• Typically used for commercial or industrial applications where there could be higher chances of short circuit currents

Request
Callback

Additional Information:

• Item Code: 1SYS271011R0974
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Specification

• model:SH200M Series MCBs 
• curren rating:2A, 
• no. of poles:1Pole / Single Pole / SP
• type:C curve MCB (trips at 5-10 x Ir)
• Breaking Capacity: 10kA AC
• Operating Voltage: 230/400/415 V AC
• Offers both Overaload and Shortcircuit protection
• Conforms to IS/IEC 60898-1
• Typically used for commercial or industrial applications where there could be higher chances of short circuit currents

Request
Callback

Additional Information:

• Item Code: 1SYS271011R0024
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Specification

• Model:SH200M Series MCBs
• current rating:3A,
• no of poles: 1Pole / Single Pole / SP
• C curve MCB (trips at 5-10 x Ir)
• Breaking Capacity: 10kA AC
• Operating Voltage: 230/400/415 V AC
• Offers both Overaload and Shortcircuit protection
• Conforms to IS/IEC 60898-1
• Typically used for commercial or industrial applications where there could be higher chances of short circuit currents

Request
Callback

Additional Information:

• Item Code: 1SYS271011R0034
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Specification

• model:SH200M Series MCBs
• current rating:4A,
• no of poles:1Pole / Single Pole / SP
• C curve MCB (trips at 5-10 x Ir)
• Breaking Capacity: 10kA AC
• Operating Voltage: 230/400/415 V AC
• Offers both Overaload and Shortcircuit protection
• Conforms to IS/IEC 60898-1
• Typically used for commercial or industrial applications where there could be higher chances of short circuit currents

Request
Callback

Additional Information:

• Item Code: 1SYS271011R0044
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

Features- Compiles to standards IEC 60947-2 & EN 60898-1- Compact size : One size up to 125A- Compact performance :Selective and back-up characteristics- Does not let go: The interchangeable terminal adapter.Cage terminals or ring lugs- On the safe side: Operating status display.- Simple and flexible: Accessories fitted by the customer- Identical accessories for a broad range of applications

Request
Callback

Additional Information:

• Item Code: 1SYS271011R0164
• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

Specification

• Model:sh200m series mcbs
• Current rating:20a,
• No of poles:1pole / single pole / sp
• C curve mcb (trips at 5-10 x ir)
• Breaking capacity: 10ka ac
• Operating voltage: 230/400/415 v ac
• Offers both overaload and shortcircuit protection
• Conforms to is/iec 60898-1
• Typically used for commercial or industrial applications where there could be higher chances of short circuit currents

Request
Callback

Additional Information:

• Item Code: 1SYS271011R0204
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Specification

• model:SH200M Series MCBs
• current rating:25A,
• no of poles:1Pole / Single Pole / SP
• C curve MCB (trips at 5-10 x Ir)
• Breaking Capacity: 10kA AC
• Operating Voltage: 230/400/415 V AC
• Offers both Overaload and Shortcircuit protection
• Conforms to IS/IEC 60898-1
• Typically used for commercial or industrial applications where there could be higher chances of short circuit currents

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

Specification

• model:SH200M Series MCBs
• current rating:32A,
• no of poles:1Pole / Single Pole / SP
• C curve MCB (trips at 5-10 x Ir)
• Breaking Capacity: 10kA AC
• Operating Voltage: 230/400/415 V AC
• Offers both Overaload and Shortcircuit protection
• Conforms to IS/IEC 60898-1
• Typically used for commercial or industrial applications where there could be higher chances of short circuit currents

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

Specification

• model:SH200M Series MCBs
• current rating:40A,
• no of poles: 1Pole / Single Pole / SP
• C curve MCB (trips at 5-10 x Ir)
• Breaking Capacity: 10kA AC
• Operating Voltage: 230/400/415 V AC
• Offers both Overaload and Shortcircuit protection
• Conforms to IS/IEC 60898-1
• Typically used for commercial or industrial applications where there could be higher chances of short circuit currents

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

• Specification
• model:SH200M Series MCBs
• current rating:50A,
• no of poles:1Pole / Single Pole / SP
• C curve MCB (trips at 5-10 x Ir)
• Breaking Capacity: 10kA AC
• Operating Voltage: 230/400/415 V AC
• Offers both Overaload and Shortcircuit protection
• Conforms to IS/IEC 60898-1
• Typically used for commercial or industrial applications where there could be higher chances of short circuit currents

Request
Callback

Additional Information:

• Item Code: 1SYS271011R0504
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Features- Compiles to standards IEC 60947-2 & EN 60898-1- Compact size : One size up to 125A- Compact performance :Selective and back-up characteristics- Does not let go: The interchangeable terminal adapter.Cage terminals or ring lugs- On the safe side: Operating status display.- Simple and flexible: Accessories fitted by the customer- Identical accessories for a broad range of applications

Request
Callback

Additional Information:

• Item Code: 2CCS814001R0844
• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

Specification

model:SH200M Series MCBs current rating:63A,no of poles: 1Pole&Neutral / Single Pole Neutral / SPNC curve MCB (trips at 5-10 x Ir)Breaking Capacity: 10kA ACOperating Voltage: 230 V ACOffers both Overaload and Shortcircuit protectionConforms to IS/IEC 60898-1Typically used for commercial or industrial applications where there could be higher chances of short circuit currents

Request
Callback

Additional Information:

• Item Code: 1SYS271113R0634
• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

General Information

Extended Product TypeSH202M-C1Product ID2SYS272011R0014Catalog DescriptionMiniature Circuit Breaker - SH200M - 2P - CLong DescriptionSH202M-C1 MiniCircuitBreaker

Dimensions

Product Net Width35 mmProduct Net Depth69 mmProduct Net Height88 mmProduct Net Weight0.25 kg

Technical

StandardsIEC/EN 60898-1Number of Poles2Tripping CharacteristicCRated Current (In)1 ARated Operational Voltageacc. to IEC 60898-1 400 V ACPower Loss2.8 W at Rated Operating Conditions per Pole 1.4 WRated Insulation Voltage (Ui)acc. to IEC/EN 60664-1 440 VOperational VoltageMaximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12V ACRated Frequency (f)50 Hz,60 HzRated Short-Circuit Capacity (Icn)(400 V AC) 10 kAEnergy Limiting Class3Overvoltage CategoryIIIPollution Degree2Rated Impulse Withstand Voltage (Uimp)4 kV,(6.2 kV @ sea level),(5.0 kV @ 2000 m)Dielectric Test Voltage50 / 60 Hz, 1 min 2 kVHousing MaterialInsulation Group II, RAL 7035Actuator TypeToggleContact Position IndicationON / OFFDegree of ProtectionIP20RemarksIP40 in enclosure with coverElectrical Endurance20000 AC cycleMechanical Endurance20000 cycleTerminal TypeScrew TerminalsScrew Terminal TypeCage TerminalConnecting CapacityConductor 25 / 25 mmFlexible with Ferrule 0.75 ... 16 mm,Flexible 0.75 ... 16 mm,Rigid 0.75 ... 25 mm,Stranded 0.75 ... 25 mmTightening Torque2 NmRecommended Screw DriverPozidriv 2Mounting on DIN RailTH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715Mounting PositionAny

Environmental

Ambient Air TemperatureOperation -25 ... +55 Degree,Storage -40 ... +70 DegreeCResistance to Shock acc. to IEC 60068-2-2725g / 2 shocks / 13 msResistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 InEnvironmental Conditions28 cycles,with 55 DegreeC / 90-96 %and 25 DegreeC / 95-100 %

Request
Callback

Additional Information:

• Item Code: 2SYS272011R0014
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information
Extended Product TypeSH202M-C1.6Product ID1SYS272011R0974Catalog DescriptionMiniature Circuit Breaker - SH200M - 2P - CLong DescriptionSH202M-C1,6 MiniCircuitBreaker
Dimensions

Product Net Width35 mmProduct Net Depth69 mmProduct Net Height88 mmProduct Net Weight0.25 kg
Technical

StandardsIEC/EN 60898-1Number of Poles2Tripping CharacteristicCRated Current (In)1.6 ARated Operational Voltageacc. to IEC 60898-1 400 V ACPower Loss3.2 W at Rated Operating Conditions per Pole 1.6 WRated Insulation Voltage (Ui)acc. to IEC/EN 60664-1 440 VOperational VoltageMaximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,,Minimum 12 V ACRated Frequency (f)50 Hz,60 HzRated Short-Circuit Capacity (Icn),(400 V AC) 10 kAEnergy Limiting Class3Overvoltage CategoryIIIPollution Degree2Rated Impulse Withstand Voltage (Uimp)4 kV,(6.2 kV @ sea level),(5.0 kV @ 2000 m)Dielectric Test Voltage50 / 60 Hz, 1 min 2 kVHousing MaterialInsulation Group II, RAL 7035Actuator TypeToggleContact Position IndicationON / OFFDegree of ProtectionIP20RemarksIP40 in enclosure with coverElectrical Endurance20000 AC cycleMechanical Endurance20000 cycleTerminal TypeScrew TerminalsScrew Terminal TypeCage TerminalConnecting CapacityConductor 25 / 25 mm,Flexible with Ferrule 0.75 ... 16 mm,Flexible 0.75 ... 16 mm,Rigid 0.75 ... 25 mm,Stranded 0.75 ... 25 mmTightening Torque2 NmRecommended Screw DriverPozidriv 2Mounting on DIN RailTH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715Mounting PositionAny
Environmental

Ambient Air TemperatureOperation -25 ... +55 DegreeC,Storage -40 ... +70 DegreeCResistance to Shock acc. to IEC 60068-2-27,25g / 2 shocks / 13 ms,Resistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 InEnvironmental Conditions28 cycles with 55 DegreeC / 90-96 %,and 25 DegreeC / 95-100 %

Request
Callback

Additional Information:

• Item Code: 1SYS272011R0974
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type:SH202M-C3
• Product ID:1SYS272011R0034
• Catalog Description:Miniature Circuit Breaker - SH200M - 2P - C
• Long Description:SH202M-C3 MiniCircuitBreaker

Dimensions

• Product Net Width:35 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.25 kg

Technical

• Standards:IEC/EN 60898-1
• Number of Poles:2
• Tripping Characteristic:C
• Rated Current (In):3 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:2.6 W at Rated Operating Conditions per Pole 1.3 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:,3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV,(6.2 kV @ sea level),(5.0 kV @ 2000 m)
• Dielectric Test Voltage:,50 / 60 Hz, 1 min: 2 kV
• Housing Material:,Insulation Group II, RAL 7035
• Actuator Type:,Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²
• Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

Environmental

• Ambient Air Temperature:Operation -25 ... +55 °C,Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 % and 25 °C / 95-100 %

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type:SH202M-C4
• Product ID:1SYS272011R0044
• Catalog Description:Miniature Circuit Breaker - SH200M - 2P - C
• Long Description:SH202M-C4 MiniCircuitBreaker

Dimensions

• Product Net Width:35 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.25 kg

Technical

• Standards:IEC/EN 60898-1
• Number of Poles:2
• Tripping Characteristic:C
• Rated Current (In):4 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:3.6 W at Rated Operating Conditions per Pole 1.8 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):,(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV (6.2 kV @ sea level),(5.0 kV @ 2000 m)
• Dielectric Test Voltage:,50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

Environmental

• Ambient Air Temperature:Operation -25 ... +55 °C,Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 % and 25 °C / 95-100 %

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type:SH202M-C6
• Product ID:1SYS272011R0064
• Catalog Description:Miniature Circuit Breaker - SH200M - 2P - C
• Long Description:SH202M-C6 MiniCircuitBreaker

Dimensions

• Product Net Width:35 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.25 kg

Technical

• Standards:IEC/EN 60898-1
• Number of Poles:2
• Tripping Characteristic:C
• Rated Current (In):6 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:4 W at Rated Operating Conditions per Pole 2 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV (6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

Environmental

• Ambient Air Temperature:Operation -25 ... +55 °C,Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 % and 25 °C / 95-100 %

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type:SH202M-C10
• Product ID:1SYS272011R0104
• Catalog Description:Miniature Circuit Breaker - SH200M - 2P - C
• Long Description:SH202M-C10 MiniCircuitBreaker

Dimensions

• Product Net Width:35 mm
• Product Net Depth:69 mm
• Product Net Height:85 mm
• Product Net Weight:0.25 kg

Technical

• Standards:IEC/EN 60898-1
• Number of Poles:2
• Tripping Characteristic:C
• Rated Current (In):10 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:4.2 W
  at Rated Operating Conditions per Pole 2.1 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Minimum 12 V AC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 6 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²
  Flexible with Ferrule 0.75 ... 16 mm²
  Flexible 0.75 ... 16 mm²
  Rigid 0.75 ... 25 mm²
  Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
  TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

Environmental

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type:SH202M-C16
• Product ID:1SYS272011R0164
• Catalog Description:Miniature Circuit Breaker - SH200M - 2P - C
• Long Description:SH202M-C16 MiniCircuitBreaker

Dimensions

• Product Net Width:35 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.25 kg

Technical

• Standards:IEC/EN 60898-1
• Number of Poles:2
• Tripping Characteristic:C
• Rated Current (In):16 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:5 W at Rated Operating Conditions per Pole 2.5 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV,(6.2 kV @ sea level),(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

Environmental

• Ambient Air Temperature:Operation -25 ... +55 °C,Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 % and 25 °C / 95-100 %

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product TypeSH202M-C20
• Product ID
• 1SYS272011R0204
• Catalog DescriptionMiniature Circuit Breaker - SH200M - 2P - C
• Long DescriptionSH202M-C20 MiniCircuitBreaker

Dimensions

• Product Net Width35 mm
• Product Net Depth69 mm
• Product Net Height88 mm
• Product Net Weight0.25 kg

Technical

• StandardsIEC/EN 60898-1
• Number of Poles2
• Tripping CharacteristicC
• Rated Current (In)20 A
• Rated Operational Voltageacc. to IEC 60898-1 400 V AC
• Power Loss5 W at Rated Operating Conditions per Pole 2.5 W
• Rated Insulation Voltage (Ui)acc. to IEC/EN 60664-1 440 V
• Operational VoltageMaximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f)50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn)(400 V AC) 10 kA
• Energy Limiting Class3
• Overvoltage CategoryIII
• Pollution Degree2
• Rated Impulse Withstand Voltage (Uimp)4 kV,(6.2 kV @ sea level),(5.0 kV @ 2000 m)
• Dielectric Test Voltage50 / 60 Hz, 1 min 2 kV
• Housing MaterialInsulation Group II, RAL 7035
• Actuator TypeToggle
• Contact Position IndicationON / OFF
• Degree of ProtectionIP20
• RemarksIP40 in enclosure with cover
• Electrical Endurance20000 AC cycle
• Mechanical Endurance20000 cycle
• Terminal TypeScrew Terminals
• Screw Terminal TypeCage Terminal
• Connecting CapacityConductor 25 / 25 mmFlexible with Ferrule 0.75 ... 16 mm,Flexible 0.75 ... 16 mm,Rigid 0.75 ... 25 mm,Stranded 0.75 ... 25 mm
• Tightening Torque2 Nm
• Recommended Screw DriverPozidriv 2
• Mounting on DIN RailTH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting PositionAny

Environmental

• Ambient Air TemperatureOperation -25 ... +55 DegreeC,Storage -40 ... +70 DegreeC
• Resistance to Shock acc. to IEC 60068-2-2725g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions28 cycles with 55 DegreeC / 90-96 % and 25 DegreeC / 95-100 %

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type:SH202M-C25
• Product ID:1SYS272011R0254
• Catalog Description:Miniature Circuit Breaker - SH200M - 2P - C
• Long Description:SH202M-C25 MiniCircuitBreaker

Dimensions

• Product Net Width:35 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.25 kg

Technical

• Standards:IEC/EN 60898-1
• Number of Poles:2
• Tripping Characteristic:C
• Rated Current (In):25 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:6.4 W at Rated Operating Conditions per Pole 3.2 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:
• Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV,(6.2 kV @ sea level),(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

Environmental

• Ambient Air Temperature:Operation -25 ... +55 °C,Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 % and 25 °C / 95-100 %

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• General Information Extended
• Product TypeSH202M-C32
• Product ID2CDS272011R0324
• Catalog DescriptionMiniature Circuit Breaker - SH200M - 2P - C
• Long DescriptionSH202M-C32 Mini CircuitBreaker

Dimensions

• Product Net Width35 mm
• Product Net Depth69 mm
• Product Net Height88 mm
• Product Net Weight0.25 kg

Technical

• StandardsIEC/EN 60898-1
• Number of Poles2
• Tripping CharacteristicC
• Rated Current (In)32 A
• Rated Operational Voltageacc. to IEC 60898-1 400 V AC
• Power Loss7.4 W at Rated Operating Conditions per Pole 3.7 W
• Rated Insulation Voltage (Ui)acc. to IEC/EN 60664-1 440 V
• Operational VoltageMaximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f)50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn)(400 V AC) 10 kA
• Energy Limiting Class3
• Overvoltage CategoryIII
• Pollution Degree2
• Rated Impulse Withstand Voltage (Uimp)4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage50 / 60 Hz, 1 min 2 kV
• Housing MaterialInsulation Group II, RAL 7035
• Actuator TypeToggle
• Contact Position IndicationON / OFF
• Degree of ProtectionIP20
• RemarksIP40 in enclosure with cover
• Electrical Endurance10000 AC cycle
• Mechanical Endurance20000 cycle
• Terminal TypeScrew Terminals
• Screw Terminal TypeCage Terminal
• Connecting CapacityConductor 25 / 25 mm,Flexible with Ferrule 0.75 ... 16 mm,Flexible 0.75 ... 16 mm,Rigid 0.75 ... 25 mm,Stranded 0.75 ... 25 mm
• Tightening Torque2 Nm
• Recommended Screw DriverPozidriv 2
• Mounting on DIN RailTH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715TH35-15 (35 x 15 mm Mounting Rail), acc. to IEC 60715
• Mounting PositionAny

Environmental

• Ambient Air TemperatureOperation -25 ... +55 DegreeCStorage -40 ... +70 DegreeC
• Resistance to Shock acc. to IEC 60068-2-2725g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions28 cycles with 55 DegreeC / 90-96 % and 25 DegreeC / 95-100 %

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

Extended Product TypeSH202M-C40Product ID1SYS272011R0404Catalog DescriptionMiniature Circuit Breaker - SH200M - 2P - CLong DescriptionSH202M-C40 MiniCircuitBreaker

Dimensions

Product Net Width35 mmProduct Net Depth69 mmProduct Net Height88 mmProduct Net Weight0.25 kg

Technical

StandardsIEC/EN 60898-1Number of Poles2Tripping CharacteristicCRated Current (In)40 ARated Operational Voltageacc. to IEC 60898-1 400 V ACPower Loss9.6 W at Rated Operating Conditions per Pole 4.8 WRated Insulation Voltage (Ui)acc. to IEC/EN 60664-1 440 VOperational VoltageMaximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V ACRated Frequency (f)50 Hz,60 HzRated Short-Circuit Capacity (Icn)(400 V AC) 10 kAEnergy Limiting Class3Overvoltage CategoryIIIPollution Degree2Rated Impulse Withstand Voltage (Uimp)4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)Dielectric Test Voltage50 / 60 Hz, 1 min 2 kVHousing MaterialInsulation Group II, RAL 7035Actuator TypeToggleContact Position IndicationON / OFFDegree of ProtectionIP20RemarksIP40 in enclosure with coverElectrical Endurance10000 AC cycleMechanical Endurance20000 cycleTerminal TypeScrew TerminalsScrew Terminal TypeCage TerminalConnecting CapacityConductor 25 / 25 mm,Flexible with Ferrule 0.75 ... 16 mm,Flexible 0.75 ... 16 mm,Rigid 0.75 ... 25 mm,Stranded 0.75 ... 25 mmTightening Torque2 NmRecommended Screw DriverPozidriv 2Mounting on DIN RailTH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715Mounting PositionAny

Environmental

Ambient Air TemperatureOperation -25 ... +55 DegreeCStorage -40 ... +70 DegreeCResistance to Shock acc. to IEC 60068-2-2725g / 2 shocks / 13 msResistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 InEnvironmental Conditions28 cycleswith 55 DegreeC / 90-96 %and 25 DegreeC / 95-100 %

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product TypeSH202M-C50
• Product ID1SYS272011R0504
• Catalog DescriptionMiniature Circuit Breaker - SH200M - 2P - C
• Long DescriptionSH202M-C50 MiniCircuitBreaker

Dimensions

• Product Net Width35 mm
• Product Net Depth69 mm
• Product Net Height88 mm
• Product Net Weight0.25 kg

Technical

• StandardsIEC/EN 60898-1
• Number of Poles2
• Tripping CharacteristicC
• Rated Current (In)50 A
• Rated Operational Voltageacc. to IEC 60898-1 400 V AC
• Power Loss6.5 W at Rated Operating Conditions per Pole 3.25 W
• Rated Insulation Voltage (Ui)acc. to IEC/EN 60664-1 440 V
• Operational VoltageMaximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f)50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn)(400 V AC) 10 kA
• Energy Limiting Class3
• Overvoltage CategoryIII
• Pollution Degree2
• Rated Impulse Withstand Voltage (Uimp)4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage50 / 60 Hz, 1 min 2 kV
• Housing MaterialInsulation Group II, RAL 7035
• Actuator TypeToggle
• Contact Position IndicationON / OFF
• Degree of ProtectionIP20
• RemarksIP40 in enclosure with cover
• Electrical Endurance10000 AC cycle
• Mechanical Endurance20000 cycle
• Terminal TypeScrew Terminals
• Screw Terminal TypeCage Terminal
• Connecting CapacityConductor 25 / 25 mm,Flexible with Ferrule 0.75 ... 16 mm,Flexible 0.75 ... 16 mm,Rigid 0.75 ... 25 mm,Stranded 0.75 ... 25 mm
• Tightening Torque2 Nm
• Recommended Screw DriverPozidriv 2
• Mounting on DIN RailTH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting PositionAny

Environmental

• Ambient Air TemperatureOperation -25 ... +55 DegreeCStorage -40 ... +70 DegreeC
• Resistance to Shock acc. to IEC 60068-2-2725g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions28 cycles with 55 DegreeC / 90-96 %and 25 DegreeC / 95-100 %

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type:SH202M-C63
• Product ID:1SYS272011R0634
• Catalog Description:Miniature Circuit Breaker - SH200M - 2P - C
• Long Description:SH202M-C63 MiniCircuitBreaker

Dimensions

• Product Net Width:35 mm
• Product Net Depth:69 mm
• Product Net Height:85 mm
• Product Net Weight:0.25 kg

Technical

• Standards:IEC/EN 60898-1
• Number of Poles:2
• Tripping Characteristic:C
• Rated Current (In):63 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:9.6 W
  at Rated Operating Conditions per Pole 4.8 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Minimum 12 V AC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 6 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:10000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²
  Flexible with Ferrule 0.75 ... 16 mm²
  Flexible 0.75 ... 16 mm²
  Rigid 0.75 ... 25 mm²
  Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
  TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

Environmental

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type:SH203M-C0,5
• Product ID:1SYS273011R0984
• Catalog Description:Miniature Circuit Breaker - SH200M - 3P - C
• Long Description:SH203M-C0,5 MiniCircuitBreaker

Dimensions

• Product Net Width:52.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.375 kg

Technical

• Standards:IEC/EN 60898-1
• Number of Poles:3
• Tripping Characteristic:C
• Rated Current (In):0.5 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:4.2 W at Rated Operating Conditions per Pole 1.4 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

Environmental

• Ambient Air Temperature:Operation -25 ... +55 °C,Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 % and 25 °C / 95-100 %

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type:SH203M-C1
• Product ID:1SYS273011R0014
• Catalog Description:Miniature Circuit Breaker - SH200M - 3P - C
• Long Description:SH203M-C1 MiniCircuitBreaker

Dimensions

• Product Net Width:52.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.375 kg

Technical

• Standards:IEC/EN 60898-1
• Number of Poles:3
• Tripping Characteristic:C
• Rated Current (In):1 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:4.2 W at Rated Operating Conditions per Pole 1.4 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

Environmental

• Ambient Air Temperature:Operation -25 ... +55 °C,Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycleswith 55 °C / 90-96 %and 25 °C / 95-100 %

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type:SH203M-C1,6
• Product ID:1SYS273011R0974
• Catalog Description:Miniature Circuit Breaker - SH200M - 3P - C
• Long Description:SH203M-C1,6 MiniCircuitBreaker

Dimensions

• Product Net Width:52.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.375 kg

Technical

• Standards:IEC/EN 60898-1
• Number of Poles:3
• Tripping Characteristic:C
• Rated Current (In):1.6 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC,Power Loss:4.8 W at Rated Operating Conditions per Pole 1.6 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

Environmental

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycleswith 55 °C / 90-96 %and 25 °C / 95-100 %

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type:DB200
• Product ID:1SAZ401110R0001
• Catalog Description:DB200 Single Mounting Kit
• Long Description:DB200 Single mounting kit

Dimensions

• Product Net Width:105 mm
• Product Net Height:43 mm
• Product Net Depth:40 mm
• Product Net Weight:0.225 kg

Specification

• Rated Operational Voltage:Main Circuit 690 V AC
• Rated Frequency (f):Main Circuit 50 Hz
  Main Circuit 60 Hz
• Rated Impulse Withstand Voltage (Uimp):Main Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Number of Poles:3
• Pollution Degree:3
• Connecting Capacity Main Circuit:Rigid or Flexible with Cable Lug 1x 25 ... 120 mm¿¿
  Hole Diameter >10 mm
• Tightening Torque:Main Circuit 25 N¿¿m
• Suitable For:TA110DU
  TA200DU
• Standards:IEC/EN 60947-1
  IEC/EN 60947-4-1
  UL 508
  CSA 22.2 No. 14

Environmental

• Ambient Air Temperature:Operation -25 ¿¿¿ +55 DegreeC
  Storage -40 ¿¿¿ +70 DegreeC
• RoHS Status:Following EU Directive 2011/65/EC

Request
Callback

Additional Information:

• Item Code: 1SAZ401110R0001
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information
• Extended Product Type:DB80
• Product ID:1SAZ301110R0001
• Catalog Description:DB80 Single Mounting Kit
• Long Description:DB80 Single mounting kit Dimensions
• Product Net Width:60 mm
• Product Net Height:92 mm
• Product Net Depth:117 mm
• Product Net Weight:0.155 kg Specification
• Rated Operational Voltage:Main Circuit 690 V AC
• Rated Operational Current AC-3 (Ie):80 A
• Rated Frequency (f):Main Circuit 50 Hz Main Circuit 60 Hz
• Rated Impulse Withstand Voltage (Uimp):Main Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Number of Poles:3
• Pollution Degree:3
• Suitable For:TA42DU TA75DU TA75-M
• Standards:IEC/EN 60947-1 IEC/EN 60947-4-1 UL 508 CSA 22.2 No. 14 Environmental
• Ambient Air Temperature:Operation -25 … +55 °C Storage -40 … +70 °C
• RoHS Status:Following EU Directive 2011/65/EC

Request
Callback

Additional Information:

• Item Code: 1SAZ301110R0001
• Pay Mode Terms: T/T (Bank Transfer)