Pigeon Agency

• Extended Product Type:S203-C80
• Product ID:2CDS253001R0804
• Catalog Description:Miniature Circuit Breaker - S200 80-100A - 3P - C
• Long Description:S203-C80 MCB C-Char., 6kA, 80A, 3P

• Product Net Width:52.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.42 kg

• Standards:IEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles:3
• Tripping Characteristic:C
• Rated Current (In):80 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
  acc. to IEC 60947-2 400 V AC
• Power Loss:at Rated Operating Conditions per Pole 8.1 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 500 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Minimum 12 V AC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 6 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(400 V AC) 6 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(400 V AC) 6 kA
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group I, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:10000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 16 / 16 mm²
• Tightening Torque:3 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

• Extended Product Type:S202-C80
• Product ID:2CDS252001R0804
• Catalog Description:Miniature Circuit Breaker - S200 80-100A - 2P - C
• Long Description:S202-C80 MCB C-Char., 6kA, 80A, 2P

• Product Net Width:35 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.28 kg

• Standards:IEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles:2
• Tripping Characteristic:C
• Rated Current (In):80 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
  acc. to IEC 60947-2 400 V AC
• Power Loss:at Rated Operating Conditions per Pole 8.1 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 500 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Minimum 12 V AC
  Minimum 12 V DC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 6 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(400 V AC) 6 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(400 V AC) 6 kA
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group I, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:10000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 16 / 16 mm²
• Tightening Torque:3 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

• Extended Product Type:SH203M-C50
• Product ID:1SYS273011R0504
• Catalog Description:Miniature Circuit Breaker - SH200M - 3P - C
• Long Description:SH203M-C50 MiniCircuitBreaker

• Product Net Width:52.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.375 kg

• Standards:IEC/EN 60898-1
• Number of Poles:3
• Tripping Characteristic:C
• Rated Current (In):50 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:9.75 W at Rated Operating Conditions per Pole 3.25 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:10000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 %and 25 °C / 95-100 %

FIXED PART WITHDRAWABLE FOR C.BREAKER SACE EMAX2 E4.2 3200 THREE-POLE WITH REAR HORIZONTAL TERMINALS - for Solar Applications

• Extended Product TypeS203P-K6
• Product ID2CDS283001R0377
• EAN4016779592703
• Catalog DescriptionMiniature Circuit Breaker - S200P - 3P - K - 6 ampere
• Long DescriptionSystem pro M compact S200P miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 25 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200P comply with IEC/EN 60898-1, IEC/EN 609 47-2, UL1077 and CSA 22.2 No. 235, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200P to save 50% space.

• Extended Product TypeS204-C100
• Product ID2CDS254001R0824
• Catalog DescriptionMiniature Circuit Breaker - S200 80-100A - 4P - C
• Long DescriptionS204-C100 MCB C-Char., 6kA, 100A, 4P

• Product Net Width70 mm
• Product Net Depth69 mm
• Product Net Height88 mm
• Product Net Weight0.56 kg

• StandardsIEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles4
• Tripping CharacteristicC
• Rated Current (In)100 A
• Rated Operational Voltageacc. to IEC 60898-1 400 V AC
  acc. to IEC 60947-2 400 V AC
• Power Lossat Rated Operating Conditions per Pole 9.8 W
• Rated Insulation Voltage (Ui)acc. to IEC/EN 60664-1 500 V
• Operational VoltageMaximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Minimum 12 V AC
• Rated Frequency (f)50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn)(400 V AC) 6 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu)(400 V AC) 6 kA
• Rated Service Short-Circuit Breaking Capacity (Ics)(400 V AC) 6 kA
• Overvoltage CategoryIII
• Pollution Degree3
• Rated Impulse Withstand Voltage (Uimp)4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage50 / 60 Hz, 1 min 2 kV
• Housing MaterialInsulation Group I, RAL 7035
• Actuator TypeToggle
• Contact Position IndicationON / OFF
• Degree of ProtectionIP20
• RemarksIP40 in enclosure with cover
• Electrical Endurance10000 AC cycle
• Mechanical Endurance20000 cycle
• Terminal TypeScrew Terminals
• Screw Terminal TypeFailsafe Bi-directional Cylinder-lift Terminal
• Connecting CapacityBusbar 16 / 16 mm
• Tightening Torque3 Nm
• Recommended Screw DriverPozidriv 2
• Mounting on DIN RailTH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Mounting PositionAny

• Ambient Air TemperatureOperation -25 ... +55 DegreeC
  Storage -40 ... +70 DegreeC
• Resistance to Shock acc. to IEC 60068-2-2725g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions28 cycles
  with 55 DegreeC / 90-96 %
  and 25 DegreeC / 95-100 %

General Information

Extended Product TypeS203-C100
Product ID2CDS253001R0824
Catalog DescriptionMiniature Circuit Breaker - S200 80-100A - 3P -CLong
DescriptionS203-C100 MCB C-Char., 6kA, 100A, 3P

Dimensions

Product Net Width 52.5 mm
Product Net Depth69 mm
Product Net Height88 mm
Product Net Weight0.42 kg

Specification

StandardsIEC/EN 60898-1

IEC/EN 60947-2Number of Poles3Tripping CharacteristicCRated Current (In)100 ARated Operational Voltageacc. to IEC 60898-1 400 V AC

acc. to IEC 60947-2 400 V ACPower Lossat Rated Operating Conditions per Pole 9.8 WRated Insulation Voltage (Ui)acc. to IEC/EN 60664-1 500 VOperational VoltageMaximum (Incl. Tolerance) 440 V AC

Maximum 440 V AC

Minimum 12 V ACRated Frequency (f)50 Hz

60 HzRated Short-Circuit Capacity (Icn)(400 V AC) 6 kARated Ultimate Short-Circuit Breaking Capacity (Icu)(400 V AC) 6 kARated Service Short-Circuit Breaking Capacity (Ics)(400 V AC) 6 kAOvervoltage CategoryIIIPollution Degree3Rated Impulse Withstand Voltage (Uimp)4 kV

(6.2 kV @ sea level)

(5.0 kV @ 2000 m)Dielectric Test Voltage50 / 60 Hz, 1 min 2 kVHousing MaterialInsulation Group I, RAL 7035Actuator TypeToggleContact Position IndicationON / OFFDegree of ProtectionIP20RemarksIP40 in enclosure with coverElectrical Endurance10000 AC cycleMechanical Endurance20000 cycleTerminal TypeScrew TerminalsScrew Terminal TypeFailsafe Bi-directional Cylinder-lift TerminalConnecting CapacityBusbar 16 / 16 mmTightening Torque3 NmRecommended Screw DriverPozidriv 2Mounting on DIN RailTH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715

TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715Mounting PositionAny

Environmental

Ambient Air TemperatureOperation -25 ... +55 DegreeC

Storage -40 ... +70 DegreeCResistance to Shock acc. to IEC 60068-2-2725g / 2 shocks / 13 msResistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 InEnvironmental Conditions28 cycles

with 55 DegreeC / 90-96 %

and 25 DegreeC / 95-100 %

• Extended Product Type:S202-C100
• Product ID:2CDS252001R0824
• Catalog Description:Miniature Circuit Breaker - S200 80-100A - 2P - C
• Long Description:S202-C100 MCB C-Char., 6kA, 100A, 2P

• Product Net Width:35 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.28 kg

• Standards:IEC/EN 60898-1
• 
  IEC/EN 60947-2
• Number of Poles:2
• Tripping Characteristic:C
• Rated Current (In):100 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
  acc. to IEC 60947-2 400 V AC
• Power Loss:at Rated Operating Conditions per Pole 9.8 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 500 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Minimum 12 V AC
  Minimum 12 V DC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 6 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(400 V AC) 6 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(400 V AC) 6 kA
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group I, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:10000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 16 / 16 mm²
• Tightening Torque:3 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

• Extended Product Type:S204-C80
• Product ID:2CDS254001R0804
• Catalog Description:Miniature Circuit Breaker - S200 80-100A - 4P - C
• Long Description:S204-C80 MCB C-Char., 6kA, 80A, 4P

• Product Net Width:70 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.56 kg

• Standards:IEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles:4
• Tripping Characteristic:C
• Rated Current (In):80 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
  acc. to IEC 60947-2 400 V AC
• Power Loss:at Rated Operating Conditions per Pole 8.1 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 500 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Minimum 12 V AC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 6 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(400 V AC) 6 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(400 V AC) 6 kA
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group I, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:10000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 16 / 16 mm²
• Tightening Torque:3 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

• 
  
• Extended Product Type F204 A S-40/0,1
• Product ID 2CSF204201R2400
• EAN 8012542823308
• Catalog Description F204 A S-40/0,1 Residual Current Circuit Breaker
• Long Description
• The RCCBs F200 series assures protection to people and installations against fault current to earth. A large
• offer for standard instantaneous and selective AC and A types is completed with some configurations for
• special applications.

• Extended Product Type:OVR T2 40-275 P QS
• Product ID:2CTB803871R2300
• Catalog Description:OVR T2 40-275 P QS
• Long Description:B751958

• Product Net Width:17.8 mm
• Product Net Depth:58 mm
• Product Net Height:88 mm
• Product Net Weight:120 g
• Width in Number of Modular Spacings:1

• Type of Low Voltage Distribution System:TT
  TN-C
  TN-S
• Nominal AC Voltage of the System (Uo):230 / 400 V
• Number of Protected Poles:1
• Arrester Class:II
• Product Main Type:T2
• Standards:IEC 61643-11 / EN 61643-11
• Product Type:QS
• Version:Plug-in
• Discharge Current:Nominal 20 kA
  Maximum 40 kA
  Total 40 kA
• Impulse Current:I (imp, 10 / 350 µs) 2 kA
• Maximum Continuous Operating Voltage (Uc):(L-PE) 275 V
  (L-L) 275 V
  (L-N) 275 V
  (N-PE) - V
• Voltage Rating DC:350 V
• Voltage Protection Level ( Up):(L-N) - kV
  (N-PE) - kV
  (L-PE) 1.25 kV
• Short Circuit Withstand Icc:100 kA
• Temporary Overvoltage Test Value (UT):337 V
• Short-Circuit Protective Devices:Curve B Breakers ≤ 125 A
  Curve C Breakers ≤ 125 A
  gL Type Fuses ≤ 125 A
  gG Type Fuses ≤ 125 A
• Auxiliary Circuit Load:Minimum -
  Maximum -
• Power Loss:8 mW
• Product Name:Surge Protective Device
• Suitable For:To protect the systems against the transient overvoltage (lightning)

• Extended Product Type:OVR PV T2 40-1000 P QS
• Product ID:2CTB804153R2400
• Catalog Description:OVR PV T2 40-1000 P QS
• Long Description:B752624

• Product Net Width:53.4 mm
• Product Net Depth:MMT 64.8 kA
• Product Net Height:88 mm
• Product Net Weight:455 g
• Width in Number of Modular Spacings:3

• Number of Protected Poles:2
• Arrester Class:II
• Product Main Type:T2
• Standards:IEC 61 643-11 / EN 50539-11
• Product Type:QS
• Version:Plug-in
• Discharge Current:Nominal 20 kA
  Maximum 40 kA
• Impulse Current:I (imp, 10 / 350 µs) 2 kA
  I (total, 10 / 350 µs) 4 kA
• Maximum Continuous Operating Voltage (Uc):(L-PE) 1100 V
  (L-L) 1100 V
  (L-N) - V
  (N-PE) - V
• Voltage Rating DC:1000 V
• Voltage Protection Level ( Up):(L-N) 3.8 kV
  (N-PE) 3.8 kV
  (L-PE) 3.8 kV
• Short Circuit Withstand Icc:10 kA
• Product Name:Surge Protective Device
• Suitable For:To protect the systems against the transient overvoltage (lightning)

• Extended Product Type:S204M-D25
• Product ID:2CDS274001R0251
• Catalog Description:Miniature Circuit Breaker - S200M - 4P - D
• Long Description:System pro M compact S200M miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 10 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200M comply with IEC/EN 60898-1 and IEC/EN 609 47-2, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200M to save 50% space.

• Product Net Width:70 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.5 kg

• Standards:IEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles:4
• Tripping Characteristic:D
• Rated Current (In):25 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
  acc. to IEC 60947-2 440 V AC
• Power Loss:12.4 W
  at Rated Operating Conditions per Pole 3.1 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Minimum 12 V AC
  Minimum 12 V DC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 25 kA
  (440 V AC) 15 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 18.8 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Insulation group II, black, sealable
• Contact Position Indication:Red ON / Green OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 10 / 10 mm²
  Flexible with Ferrule 0.75 ... 25 mm²
  Flexible 0.75 ... 25 mm²
  Rigid 0.75 ... 35 mm²
  Stranded 0.75 ... 35 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
  TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

• Extended Product Type:T4N PR222DS/P-LSIG In=320 3p F F
• Catalog Description:T4N PR222DS/P-LSIG In=320 3p F F
• Long Description:C.BREAKER TMAX T4N FIXED THREE-POLE WITH FRONT TERMINALS AND SOLID-STATE RELEASE IN AC PR222DS/P-LSIG R

• Product Net Width:105 mm
• Product Net Height:205 mm
• Product Net Depth:103.5 mm
• Product Net Weight:3.5 kg

• Electrical Durability:6000 cycle
  120 cycles per hour
• IIT Publishing Status:Level 0 - Information enabled
• Mechanical Durability:20000 cycle
  240 cycles per hour
• Number of Poles:3
• Power Loss:at Rated Operating Conditions per Pole 17,6 W
• Product Main Type:SACE Tmax T
• Product Name:Moulded Case Circuit Breaker
• Product Type:CB
• Rated Current (In):Main Circuit 320 A
• Rated Impulse Withstand Voltage (Uimp):8 kV
• Rated Insulation Voltage (Ui):1000 V
• Rated Operational Voltage:690 V AC
• Rated Service Short-Circuit Breaking Capacity (Ics):(220 V AC) 70 kA
  (230 V AC) 70 kA
  (380 V AC) 36 kA
  (400 V AC) 36 kA
  (415 V AC) 36 kA
  (440 V AC) 30 kA
  (500 V AC) 25 kA
  (690 V AC) 20 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(220 V AC) 7 kA
  (230 V AC) 7 kA
  (380 V AC) 36 kA
  (400 V AC) 36 kA
  (415 V AC) 36 kA
  (440 V AC) 30 kA
  (500 V AC) 25 kA
  (690 V AC) 20 kA
  (250 V DC) 2 Poles in Series 36 kA
  (250 V DC) 3 Poles in Series 25 kA
  (500 V DC) 3 Poles in Series 16 kA
• Rated Uninterrupted Current (Iu):320 A
• Release Type:EL
• Standards:IEC 60947
• Sub-type:T4
• Suitable For:T4
• Suitable for Product Class:Moulded Case Circuit Breakers
• Terminal Connection Type:Fixed Circuit-Breakers
  Front
• Version:F

• Extended Product Type:AA1-24
• Product ID:1SAM201901R1001
• Catalog Description:AA1-24 Shunt Trip
• Long Description:AA1-24 Shunt Trip 20-24V

• Product Net Width:18 mm
• Product Net Height:90 mm
• Product Net Depth:75.5 mm
• Product Net Weight:0.1 kg

• Rated Control Supply Voltage (Us):20 … 24 V AC
  20 … 70 V AC
  20 … 70 V DC
• Rated Frequency (f):Auxiliary Circuit 50 Hz
  Auxiliary Circuit 60 Hz
  Auxiliary Circuit DC
• Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²
  Flexible 1/2x 0.75 ... 2.5 mm²
  Rigid 1/2x 1 ... 4 mm²
• Tightening Torque:Auxiliary Circuit 0.8 ... 1.2 N·m
• Wire Stripping Length:Auxiliary Circuit 10 mm
• Recommended Screw Driver:Pozidriv 2
• Standards:IEC/EN 60947-1
  IEC/EN 60947-4-1
  UL 60947-1
  UL 60947-4-1
• Product Name:Shunt Trip
• Suitable For:MS116
  MS132
• Suitable for Product Class:Manual Motor Starter

• Ambient Air Temperature:Operation -25 ... +60 °C
  Storage -50 ... +80 °C
• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

• Extended Product Type:S201M-C6
• Product ID:2CDS271001R0064
• EAN:4016779549967
• Catalog Description:Miniature Circuit Breaker - S200M - 1P - C - 6 ampere
• Long Description:System pro M compact S200M miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 10 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200M comply with IEC/EN 60898-1 and IEC/EN 609 47-2, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200M to save 50% space.

• Extended Product Type:F204 AC-40/0,03
• Product ID:2CSF204001R1400
• EAN:8012542781301
• Catalog Description:F204 AC-40/0,03 Residual Current Circuit Breaker
• Long Description:The RCCBs F200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous and selective AC and A types is completed with some configurations for special applications.

FIXED PART WITHDRAWABLE FOR C.BREAKER SACE EMAX2 E4.2 4000 THREE-POLE WITH REAR HORIZONTAL TERMINALS (VERS. V) - for solar applications

FIXED PART WITHDRAWABLE FOR C.BREAKER SACE EMAX2 E2.2 2500 THREE-POLE WITH REAR HORIZONTAL TERMINALS - for Solar Applications

• Extended Product Type:AA1-110
• Product ID:1SAM201910R1002
• Catalog Description:AA1-110 Shunt Trip
• Long Description:AA1-110 Shunt Trip 110V

• Product Net Width:18 mm
• Product Net Height:90 mm
• Product Net Depth:75.5 mm
• Product Net Weight:0.1 kg

• Rated Control Supply Voltage (Us):110 V AC
  110 … 200 V AC
  110 … 200 V DC
• Rated Frequency (f):Auxiliary Circuit 50 Hz
  Auxiliary Circuit 60 Hz
  Auxiliary Circuit DC
• Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²
  Flexible 1/2x 0.75 ... 2.5 mm²
  Rigid 1/2x 1 ... 4 mm²
• Tightening Torque:Auxiliary Circuit 0.8 ... 1.2 N·m
• Wire Stripping Length:Auxiliary Circuit 10 mm
• Recommended Screw Driver:Pozidriv 2
• Standards:IEC/EN 60947-1
  IEC/EN 60947-4-1
  UL 60947-1
  UL 60947-4-1
• Product Name:Shunt Trip
• Suitable For:MS116
  MS132
• Suitable for Product Class:Manual Motor Starter

• Ambient Air Temperature:Operation -25 ... +60 °C
  Storage -50 ... +80 °C
• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

• Type: Air Operated
• Utilises: up to 6300 A. of voltage
• Current:0 A to 2500A

• Improved circuit design enabling the relay to be in ''On'' position only while the genset is in use
• While functioning on main supply the relay remains in ''Off'' position
• Minimal switch over time for main supply so that even sensitive equipment like computers do not get disconnected during the switch over
• On resumption of main supply, the connected load is automatically shifted on mains
• Automatic engine switch off system for portable generators (running on petrol / kerosene) when main supply is resumed.
• Size: (LWD mm) 150 / 110 / 50 and Single phase 30 A
• Size: (LWD mm) 180 / 142 / 80
• It comes in operating voltage from 150 V to 280 V AC

The range of Distribution Boards we offer has a great demand in the market for its comprehensive variety and premium quality. Our clients often appreciate the variety of boards that is capable of meeting varied requirements. These boards can be availed from us at very affordable prices.

Following are the type of boards available with us:

• SPN Distribution Boards
• TPN Distribution Boards
• Horizontal & Vertical Per Phase Isolation Distribution Boards
• TPN Vertical Distribution Boards With MCCB & MCB Incomer
• Seven Segment Distribution Boards
• MCB Metal Enclosures, Plugs, & Sockets
• Acrylic Distribution Boards
• Flexy - Tier Distribution Boards.

General Information

Extended Product Type:SHD203/25Product ID:1SYD273111R0025Catalog Description:SHD203/25 Switch Disconnector 3P, 25ALong Description:SHD203/25 Switch Disconnector 3P, 25A

Dimensions

Product Net Width:52.5 mmProduct Net Height:85 mmProduct Net Depth:69 mmProduct Net Weight:0.225 kg

Specification

Rated Operational Voltage:415 V AC

Environmental

Ambient Air Temperature:Operation -25 ... +55 DegreeC

Storage -40 ... +70 DegreeCResistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 InResistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms

• Brand Name:Abb
• IP Rating:IP 43
• Model:E-S7SEG M 4 T1
• No of modules:T-MAX+12+12
• Number of Poles:8 POLE
• Number Of Ways:4 Way
• Number of door:2
• Part Number:NSYN8690S7S0MT14
• Phase:Three Phase
• Series:Elegance series

• Extended Product Type:T4S 250 PR222DS/P-LSIG In=250 4p F F
• Catalog Description:T4S 250 PR222DS/P-LSIG In=250 4p F F
• Long Description:C.BREAKER TMAX T4S 250 FIXED FOUR-POLE WITH FRONT TERMINALS AND SOLID-STATE RELEASE IN AC PR222DS/P-LSIG R 250

• Product Net Width:140 mm
• Product Net Height:205 mm
• Product Net Depth:103.5 mm
• Product Net Weight:3.05 kg

• Electrical Durability:8000 cycle
  120 cycles per hour
• IIT Publishing Status:Level 0 - Information enabled
• Mechanical Durability:20000 cycle
  240 cycles per hour
• Number of Poles:4
• Power Loss:at Rated Operating Conditions per Pole 10,7 W
• Product Main Type:SACE Tmax T
• Product Name:Moulded Case Circuit Breaker
• Product Type:CB
• Rated Current (In):250 A
• Rated Impulse Withstand Voltage (Uimp):8 kV
• Rated Insulation Voltage (Ui):1000 V
• Rated Operational Voltage:690 V AC
  750 V DC
• Rated Service Short-Circuit Breaking Capacity (Ics):(220 V AC) 85 kA
  (230 V AC) 85 kA
  (380 V AC) 50 kA
  (400 V AC) 50 kA
  (415 V AC) 50 kA
  (440 V AC) 40 kA
  (500 V AC) 30 kA
  (690 V AC) 25 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(220 V AC) 8.5 kA
  (230 V AC) 8.5 kA
  (380 V AC) 50 kA
  (400 V AC) 50 kA
  (415 V AC) 50 kA
  (440 V AC) 40 kA
  (500 V AC) 36 kA
  (690 V AC) 25 kA
  (250 V DC) 2 Poles in Series 50 kA
  (500 V DC) 2 Poles in Series 36 kA
  (750 V DC) 3 Poles in Series 25 kA
• Rated Uninterrupted Current (Iu):250 A
• Release Type:EL
• Standards:IEC 60947
• Sub-type:T4
• Suitable For:T4
• Suitable for Product Class:Moulded Case Circuit Breakers
• Terminal Connection Type:Fixed Circuit-Breakers
  Front
• Test Voltage at Industrial Frequency for 1 Minute:3500 V
• Test Voltage Max (Utest):3500 V
• Version:F

• Extended Product Type:OPR 30 ABB
• Product ID:2CTB899800R7000
• EAN:3660308513496
• Catalog Description:OPR 30 ABB
• Long Description:B751417Dimensions
  • Product Net Width:7.4 cm
  • Product Net Height:17 cm
  • Product Net Depth / Length:78 mm
  • Product Net Weight:2.1 kg

Our Earth Fault Relay is a small and compact unit based on latest electronic devices. It senses the current flowing through a totally electrically isolated circuit and energises the electromagnetic relay when the current crosses the set value. The current setting is done with a continuously adjustable knob over a linearly calibrated dial. It incorporates a built-in ON delay timer to avoid spurious trappings in case of transients with time adjustable from 1 to 10 seconds the help of a second knob over a calibrated dial.

Features:

•Accuracy settings
•Current range features
•Varied operating voltage
•Easy to operate