ABB Electrical Products

Product Details:

We are trader and exporter of ABB MCB'sof ABB brand. Our procuring agents ensure that these isolators are in full compliance with the industry standards. These products can be availed from us at market leading prices.

 

Features:

•SH200M series,
•'C' curve mcb's of current ratings from 0. 5,1,1. 6,2,3,4,6,8,10,13,16,20,25,32,40,50,63, amperes in sp,spn,dp,tp. Tpn & four pole ranges.
•Higher rating mcb's of 80 & 100a, dc mcb's, b, k, z curves mcb's are available.
•Conforms to iec 60898, ce & isi marking

Product Details:

General Information

• Extended Product Type:CA5-22E
• Product ID:1SBN010040R1022
• Catalog Description:CA5-22E Auxiliary Contact Block
• Long Description:CA5-22E Auxiliary Contact Block

Dimensions

• Product Net Width:44 mm
• Product Net Height:47 mm
• Product Net Depth:39 mm
• Product Net Weight:0.060 kg

Environmental

• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Specification

• Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20
• IIT Publishing Status:Level 0 - Information enabled
• Maximum Electrical Switching Frequency:1200 cycles per hour
• Maximum Mechanical Switching Frequency:3600 cycles per hour
• Mechanical Durability:A9 ... A75 10 million
  A95 ... A110 3 million
• Minimum Switching Capacity:A9 ... A75 17 / 5 volt per milliamp
  A95 ... A110 24 / 50 volt per milliamp
• Mounting on Contactors:A 9...A 75
• Mounting Position:Front face
• Number of Auxiliary Contacts NC:2
• Number of Auxiliary Contacts NO:2
• Order Multiple:2 piece
• Power Loss:at Rated Operating Conditions per Pole 0.1 W
• Product Main Type:Accessories for Block Contactors
• Product Name:Auxiliary Contact Block
• Rated Breaking Capacity acc. to IEC 60947-5-1:10 x Ie AC-15
• Rated Frequency (f):Supply Circuit 50 Hz
  Supply Circuit 60 Hz
• Rated Insulation Voltage (Ui):acc. to IEC 60947-5-1 and VDE 0110 (Gr. C) 690 V
  acc. to UL/CSA 600 V
• Rated Making Capacity acc. to IEC 60947-5-1:10 x Ie AC-15
• Rated Operational Current AC-15 (Ie):(220 / 240 V) 4 A
  (24 / 127 V) 6 A
  (380 / 440 V) 3 A
  (500 V) 2 A
  (690 V) 2 A
• Rated Operational Current DC-13 (Ie):(125 V) 0.55 / 69 A
  (24 V) 6 / 144 A
  (250 V) 0.3 / 75 A
  (48 V) 2.8 / 134 A
  (72 V) 1 / 72 A
• Rated Operational Voltage:Auxiliary Circuit 690 V
  Main Circuit 24 V
• Rated Short-time Withstand Current (Icw):for 1 s 140.0 A
• Remarks:100
• Terminal Type:Screw Terminals

Additional Information:

• Item Code: 1SBN010040R1022
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We manufacture earth leakage circuit breakers of the highest quality which are designed for optimum performance and durability. Typical applications include motor protection, transformer protection, household appliances and office equipment, electrical tools, mobile homes, watercraft, construction vehicles, medical equipment. Our circuit breakers are also used in electric, lighting distribution system or motor distribution system for protecting overload and short-circuit in the system. Features: •High performance •Accuracy •Various applications •Long service life

Product Details:

We have in store with us Residual Current Circuit Breakers that have been procured from abb. These come with overload and short circuit protection, and have therefore been famed for their high performance and functionality. Our esteemed clients can avail these products from us at economical prices.

 

Specifications:

•

Rcbo's current rattings of 6,10,16,25,32 ampere

•

Rated sensitivity of 30,100,300 milli ampere

•

Double pole & four pole ranges

•

Conforms to iec 61009, ce & isi marking

 

Product Details:

ABB offers Air Circuit Breakers, the best solution for restoring the service condition rapidly in case of fault, providing at the same time optimum protection of the electrical installation. From the miniature circuit-breakers to the moulded-case and air circuit-breakers of the standard and high-breaking capacity type, with the ABB range, every technical problem has been solved. A reliable and advanced reply which, thanks to the interaction of electronics, is also present today in the control and operation stages of electrical installations.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

AC Induction Motor offeredcomes backed by latest technology support and can be made available in single-phase or three-phase options. These can handle power up to 200W and provide suitable output torque for achieving smooth and flawless performance, Some of its features include available in power options of 0.04 to 15kw; quality aluminum alloy based finish; provides for rust resistant working; compact structure in completely sealed finish; have superior overload capacity; provide for stable transmission with reduced vibration and operation noise.

Product Details:

• General Information
• Extended Product Type:A12-30-01 220-230V 50Hz / 230-240V 60Hz
• Product ID:1SBL161001R8001
• Catalog Description:A12-30-01 220-230V 50Hz / 230-240V 60Hz Contactor
• Long Description:A12 contactors are mainly used for controlling 3-phase motors and generally for controlling power circuits up to 690 V AC or 220 V DC. The contactors can also be used for many other applications such as isolation, capacitor switching, lighting. The A... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.

Dimensions

• Product Net Width:44 mm
• Product Net Depth:74 mm
• Product Net Height:74 mm
• Product Net Weight:0.340 kg

Specification

• Number of Main Contacts NO:3
• Number of Main Contacts NC:0
• Number of Auxiliary Contacts NO:0
• Number of Auxiliary Contacts NC:1
• Standards:Devices complying with international standards IEC 947-1 / 947-4-1, and European standards EN 60 947-1 / 60 947-4-1. Electromagnetic compatibility (EMC) acc. to amendment A11 to IEC 947-1; EN 60 947-1 and amendment 2 to IEC 947-4-1
• Rated Operational Voltage:Main Circuit 690 V
• Rated Frequency (f):Supply Circuit 50 Hz
  Supply Circuit 60 Hz
• Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-4-1, Open Contactors q = 40 °C 28 A
  acc. to IEC 60947-5-1, q = 40 °C 16 A
• Rated Operational Current AC-1 (Ie):(690 V) 40 °C 27 A
  (690 V) 55 °C 25 A
  (690 V) 70 °C 20 A
• Rated Operational Current AC-3 (Ie):(220 / 230 / 240 V) 55 °C 12 A
  (380 / 400 V) 55 °C 12 A
  (415 V) 55 °C 12 A
  (440 V) 55 °C 12 A
  (500 V) 55 °C 12 A
  (690 V) 55 °C 9 A
• Rated Breaking Capacity AC-3 acc. to IEC 60947-4-1:8 x Ie AC-3
• Rated Making Capacity AC-3 acc. to IEC 60947-4-1:10 x Ie AC-3
• Rated Operational Current AC-15 (Ie):(220 / 240 V) 4 A
  (24 / 127 V) 6 A
  (380 / 440 V) 3 A
  (500 V) 2 A
  (690 V) 2 A
• Short-Circuit Protective Devices:Auxiliary Circuit - gG Type Fuses 10 A
  gG Type Fuses 32 A
• Maximum Breaking Capacity:cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 250 A
  cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 90 A
• Maximum Electrical Switching Frequency:AC-1 600 cycles per hour
  AC-2 / AC-4 300 cycles per hour
  AC-3 1200 cycles per hour
• Rated Operational Current DC-13 (Ie):(125 V) 1.1 / 138 A
  (24 V) 6 / 144 A
  (250 V) 0.55 / 138 A
  (48 V) 2.8 / 134 A
  (72 V) 2 / 144 A
• Rated Insulation Voltage (Ui):acc. to IEC 60947-4-1 and VDE 0110 (Gr. C) 1000 V
  acc. to UL/CSA 600 V
• Rated Impulse Withstand Voltage (Uimp):8 kV
• Mechanical Durability:10 million
• Maximum Mechanical Switching Frequency:3600 cycles per hour
• Coil Operating Limits:(acc. to IEC 60947-4-1) 0.85 ... 1.1 x Uc (at θ ≤ 55 °C) °C
• Rated Control Circuit Voltage (Uc):50 Hz 220 … 230 V
  60 Hz 230 … 240 V
• Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20
• Connecting terminals (delivered in open position) Main poles:M 3.5 (+,-) pozidriv 2 screws with cable clamp
• Terminal Type:Screw Terminals

Environmental

• Climatic Withstand:acc. to IEC 60068-2-30 and 60068-2-11 - UTE C 63-100 specification II
• Maximum Operating Altitude Permissible:3000 m
• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Item Code: 1SBL161001R8001
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type:A50-30-00 220-230V 50Hz / 230-240V 60Hz
• Product ID:1SBL351001R8000
• Catalog Description:A50-30-00 220-230V 50Hz / 230-240V 60Hz Contactor
• Long Description:A50 contactors are mainly used for controlling 3-phase motors and generally for controlling power circuits up to 690 V AC / 1000 V AC or 220 V DC. The contactors can also be used for many other applications such as isolation, capacitor switching, lighting. The A... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, front and side-mounted add-on auxiliary contact blocks - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.

Dimensions

• Product Net Width:70 mm
• Product Net Depth:108 mm
• Product Net Height:110 mm
• Product Net Weight:1.160 kg

Specification

• Number of Main Contacts NO:3
• Number of Main Contacts NC:0
• Number of Auxiliary Contacts NO:0
• Number of Auxiliary Contacts NC:0
• Standards:Devices complying with international standards IEC 947-1 / 947-4-1, and European standards EN 60 947-1 / 60 947-4-1. Electromagnetic compatibility (EMC) acc. to amendment A11 to IEC 947-1; EN 60 947-1 and amendment 2 to IEC 947-4-1
• Rated Operational Voltage:Main Circuit 1000 V
• Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-4-1, Open Contactors q = 40 °C 100 A
• Rated Operational Current AC-1 (Ie):(690 V) 40 °C 100 A
  (690 V) 55 °C 85 A
  (690 V) 70 °C 70 A
• Rated Operational Current AC-3 (Ie):(1000 V) 55 °C 23 A
  (220 / 230 / 240 V) 55 °C 53 A
  (380 / 400 V) 55 °C 50 A
  (415 V) 55 °C 50 A
  (440 V) 55 °C 45 A
  (500 V) 55 °C 45 A
  (690 V) 55 °C 35 A
• Rated Operational Power AC-3 (Pe):(220 / 230 / 240 V) 15 kW
  (380 / 400 V) 22 kW
  (415 V) 25 kW
  (440 V) 25 kW
  (500 V) 30 kW
  (690 V) 30 kW
• Rated Breaking Capacity AC-3 acc. to IEC 60947-4-1:8 x Ie AC-3
• Rated Making Capacity AC-3 acc. to IEC 60947-4-1:10 x Ie AC-3
• Short-Circuit Protective Devices:gG Type Fuses 100 A
• Maximum Breaking Capacity:cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 1300 A
  cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 630 A
• Maximum Electrical Switching Frequency:AC-1 600 cycles per hour
  AC-2 / AC-4 150 cycles per hour
  AC-3 600 cycles per hour
• Rated Insulation Voltage (Ui):acc. to IEC 60947-4-1 and VDE 0110 (Gr. C) 1000 V
  acc. to UL/CSA 600 V
• Rated Impulse Withstand Voltage (Uimp):8 kV
• Maximum Mechanical Switching Frequency:3600 cycles per hour
• Coil Operating Limits:(acc. to IEC 60947-4-1) 0.85 ... 1.1 x Uc (at θ ≤ 55 °C) °C
• Rated Control Circuit Voltage (Uc):50 Hz 220 … 230 V
  60 Hz 230 … 240 V
• Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20
• Connecting terminals (delivered in open position) Main poles:M 6 (+,-) pozidriv 2 screws with 1x (13 x 10 mm) connector
• Terminal Type:Screw Terminals

Environmental

• Ambient Air Temperature:Close to Contactor Fitted with Thermal O/L Relay -25 ... +55 °C
  Close to Contactor for Storage -60 ... +80 °C
  Close to Contactor without Thermal O/L Relay (0.85 ... 1.1 Uc) -40 ... +55 °C
  Close to Contactor without Thermal O/L Relay (Uc) -40 ... +70 °C
• Climatic Withstand:acc. to IEC 60068-2-30 and 60068-2-11 - UTE C 63-100 specification II
• Maximum Operating Altitude Permissible:3000 m
• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Item Code: 1SBL351001R8000
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type: CA5-10
• Product ID: 1SBN010010R1010
• ABB Type Designation: CA 5-10
• Catalog Description: CA5-10 Auxiliary Contact Block
• Long Description: CA5-10 Auxiliary Contact Block

Dimensions

• Product Net Weight: 0.143 kg

Environmental

• RoHS Status: Following EU Directive 2002/95/EC August 18, 2005 and amendmen

Specification

• Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20
• IIT Publishing Status:Level 0 - Information enabled
• Maximum Electrical Switching Frequency:1200 cycles per hour
• Maximum Mechanical Switching Frequency:3600 cycles per hour
• Mechanical Durability:A9 ... A75 10 million
  A95 ... A110 3 million
• Minimum Switching Capacity:A9 ... A75 17 / 5 volt per milliamp
  A95 ... A110 24 / 50 volt per milliamp
• Mounting on Contactors:A 9...A 75
• Mounting Position:Front face
• Number of Auxiliary Contacts NO:1
• Order Multiple:10 piece
• Power Loss:at Rated Operating Conditions per Pole 0.1 W
• Product Main Type:Accessories for Block Contactors
• Product Name:Auxiliary Contact Block
• Rated Breaking Capacity acc. to IEC 60947-5-1:10 x Ie AC-15
• Rated Frequency (f):Supply Circuit 50 Hz
  Supply Circuit 60 Hz
• Rated Insulation Voltage (Ui):acc. to IEC 60947-5-1 and VDE 0110 (Gr. C) 690 V
  acc. to UL/CSA 600 V
• Rated Making Capacity acc. to IEC 60947-5-1:10 x Ie AC-15
• Rated Operational Current AC-15 (Ie):(220 / 240 V) 4 A
  (24 / 127 V) 6 A
  (380 / 440 V) 3 A
  (500 V) 2 A
  (690 V) 2 A
• Rated Operational Current DC-13 (Ie):(125 V) 0.55 / 69 A
  (24 V) 6 / 144 A
  (250 V) 0.3 / 75 A
  (48 V) 2.8 / 134 A
  (72 V) 1 / 72 A
• Rated Operational Voltage:Auxiliary Circuit 690 V
  Main Circuit 24 V
• Rated Short-time Withstand Current (Icw):for 1 s 140.0 A
• Remarks:100
• Technical Information:AUXILIARY SWITCH BLOCK
• Terminal Type:Screw Terminals

Additional Information:

• Item Code: 1SBN010010R1010
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type:UA110-30-00RA 220-230V 50Hz
• Product ID:1SFL451024R8000
• Catalog Description:UA110-30-00RA 220-230V 50Hz Contactor
• Long Description:A 3-phase Contactor suitable for Capacitor switching application. Maximum permissible peak current 100 times the nominal RMS current. Operated with a control voltage, versions from 24…….690 V

Dimensions

• Product Net Width:90.0 mm
• Product Net Depth:155.6 mm
• Product Net Height:170.0 mm
• Product Net Weight:2.000 kg

Specification

• Number of Main Contacts NO:3
• Number of Main Contacts NC:0
• Number of Auxiliary Contacts NO:0
• Number of Auxiliary Contacts NC:0
• Rated Operational Voltage:Main Circuit 1000 V
• Rated Frequency (f):Main Circuit 50 Hz
• Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-4-1, Open Contactors q = 40 °C 160 A
• Rated Operational Current AC-1 (Ie):(690 V) 55 °C 145 A
  (690 V) 40 °C 160 A
  (690 V) 70 °C 130 A
• Rated Operational Current AC-3 (Ie):(1000 V) 55 °C 30 A
  (415 V) 55 °C 110 A
  (220 / 230 / 240 V) 55 °C 110 A
  (690 V) 55 °C 82 A
  (440 V) 55 °C 100 A
  (380 / 400 V) 55 °C 110 A
  (500 V) 55 °C 100 A
• Rated Breaking Capacity AC-3 acc. to IEC 60947-4-1:8 x Ie AC-3
• Rated Making Capacity AC-3 acc. to IEC 60947-4-1:10 x Ie AC-3
• Maximum Breaking Capacity:cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 1160 A
  cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 800 A
• Maximum Electrical Switching Frequency:AC-3 300 cycles per hour
  AC-1 300 cycles per hour
  AC-2 / AC-4 150 cycles per hour
• Rated Insulation Voltage (Ui):acc. to UL/CSA 600 V
  acc. to IEC 60947-4-1 and VDE 0110 (Gr. C) 1000 V
• Rated Impulse Withstand Voltage (Uimp):Main Circuit 8 kV
• Mechanical Durability:10 million
• Maximum Mechanical Switching Frequency:3600 cycles per hour
• Coil Operating Limits:(acc. to IEC 60947-4-1) 0.85 x Uc Min. ... 1.1 x Uc Max. (at θ ≤ 70 °C) °C
• Rated Control Circuit Voltage (Uc):60 Hz 230 … 240 V
  50 Hz 220 … 230 V
• Coil Consumption:Pull-in at Max. Rated Control Circuit Voltage 60 Hz 450 V·A
  Holding at Max. Rated Control Circuit Voltage 50 Hz 22 V·A
  Pull-in at Max. Rated Control Circuit Voltage 50 Hz 350 V·A
  Holding at Max. Rated Control Circuit Voltage 60 Hz 26 V·A
• Operate Time:Between Coil Energization and NO Contact Closing 10 … 25 ms
  Between Coil De-energization and NC Contact Closing 7 … 15 ms
• Connecting Capacity Main Circuit:Flexible with Cable End 1x10…70 mm²
  Bar 30 mm²
  Rigid 2x6…65 mm²
• Connecting Capacity Auxiliary Circuit:Solid 2x1…4 mm²
  Flexible with Insulated Ferrule 2x0.75…2.5 mm²
  Stranded 1x1…4 mm²
  Flexible 2x0.75…2.5 mm²
  Flexible with Ferrule 2x0.75…2.5 mm²
• Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20
  acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP10
• Connecting terminals (delivered in open position) Main poles:M8 hexagon socket screw with single connector
• Terminal Type:Cable Clamp

Environmental

• Environmental Information:1SFC101001D0201
• Instructions and Manuals:5309660-60
• RoHS Information:1SFC101046D0203

Additional Information:

• Item Code: 1SF451024R8000
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type:UA75-30-00RA 220-230V 50Hz / 230-240V 60Hz
• Product ID:1SBL411024R8000
• Catalog Description:UA75-30-00RA 220-230V 50Hz / 230-240V 60Hz Contactor
• Long Description:UA75..RA 3-pole contactors for capacitor switching, can be used in installations in which the peak current far exceeds 100 times nominal rms current. The contactors are delivered complete with their damping resistors and must be used without additional inductances (see table below). The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. Their electrical durability is 250 000 operating cycles for Ue < 500 V and 100 000 operating cycles for 500 V ≤ Ue ≤ 690 V. The UA..RA contactors are fitted with a special front mounted block, which ensures the serial insertion of 3 damping resistors into the circuit to limit the current peak on energization of the capacitor bank. Their connection also ensures capacitor precharging in order to limit the second current peak occurring upon making of the main poles. The insertion of resistors allows to damp the highest current peak of the capacitor when switching on, whatever its level. The UA..RA series 3-pole contactors are of the block type design. - Main poles: 3 main poles - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.

Dimensions

• Product Net Width:70 mm
• Product Net Depth:140.4 mm
• Product Net Height:150 mm
• Product Net Weight:1.350 kg

Technical

• Number of Main Contacts NO:3
• Rated Operational Voltage:Main Circuit 690 V
• Short-Circuit Protective Devices:gG Type Fuses 200 A
• Maximum Breaking Capacity:cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 1300 A
  cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 630 A
• Maximum Electrical Switching Frequency:240 cycles per hour
• Rated Insulation Voltage (Ui):acc. to IEC 60947-4-1 and VDE 0110 (Gr. C) 1000 V
  acc. to UL/CSA 600 V
• Rated Impulse Withstand Voltage (Uimp):8 kV
• Coil Operating Limits:(acc. to IEC 60947-4-1) 0.85 ... 1.1 x Uc (at θ ≤ 55 °C) °C
• Rated Control Circuit Voltage (Uc):50 Hz 220 … 230 V
  60 Hz 230 … 240 V
• Operate Time:Between Coil Energization and NO Contact Closing 8 ... 27 ms
  Between Coil De-energization and NO Contact Opening 4 ... 11 ms
• Connecting Capacity Main Circuit:Rigid Cable 6 ... 16 mm²
  Flexible with Cable End 6 ... 10 mm²
• Connecting Capacity Auxiliary Circuit:Rigid Cable 1 ... 4 mm²
  Flexible with Cable End 0.75 ... 2.5 mm²
• Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20
• Connecting terminals (delivered in open position) Main poles:M 6 (+,-) pozidriv 2 screws with 1x (13 x 10 mm) connector
• Terminal Type:Screw Terminals

Environmental

• Ambient Air Temperature:Near Contactor for Operation in Free Air (0.85 ... 1.1 Uc) -40 ... +55 °C,Near Contactor for Operation in Free Air (Uc) -40 ... +70 °C,Close to Contactor for Storage -60 ... +80 °C
• Climatic Withstand:acc. to IEC 60068-2-30 and 60068-2-11 - UTE C 63-100 specification II
• Maximum Operating Altitude Permissible:3000 m
• RoHS Status:No declaration needed

Additional Information:

• Item Code: 1SBL411024R8000
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

Extended Product Type:CA5-04EProduct ID:1SBN010040R1004Catalog Description:CA5-04E Auxiliary Contact BlockLong Description:CA5-04E Auxiliary Contact Block

Dimensions

Product Net Weight:0.060 kg

Environmental

RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information

Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20IIT Publishing Status:Level 0 - Information enabledMaximum Electrical Switching Frequency:1200 cycles per hourMaximum Mechanical Switching Frequency:3600 cycles per hourMechanical Durability:A9 ... A75 10 million

A95 ... A110 3 millionMinimum Switching Capacity:A9 ... A75 17 / 5 volt per milliamp

A95 ... A110 24 / 50 volt per milliampMounting Position:Front faceNumber of Auxiliary Contacts NC:4Order Multiple:2 piecePower Loss:at Rated Operating Conditions per Pole 0.1 WProduct Main Type:Accessories for Block ContactorsProduct Name:Auxiliary Contact BlockRated Breaking Capacity acc. to IEC 60947-5-1:10 x Ie AC-15Rated Frequency (f):Supply Circuit 50 Hz

Supply Circuit 60 HzRated Insulation Voltage (Ui):acc. to IEC 60947-5-1 and VDE 0110 (Gr. C) 690 V

acc. to UL/CSA 600 VRated Making Capacity acc. to IEC 60947-5-1:10 x Ie AC-15Rated Operational Current AC-15 (Ie):(220 / 240 V) 4 A

(24 / 127 V) 6 A

(380 / 440 V) 3 A

(500 V) 2 A

(690 V) 2 ARated Operational Current DC-13 (Ie):(125 V) 0.55 / 69 A

(24 V) 6 / 144 A

(250 V) 0.3 / 75 A

(48 V) 2.8 / 134 A

(72 V) 1 / 72 ARated Operational Voltage:Main Circuit 24 V

Auxiliary Circuit 690 VRated Short-time Withstand Current (Icw):for 1 s 140.0 ARemarks:100Terminal Type:Screw Terminals

Additional Information:

• Item Code: 1SBN010040R1004
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• General Information
• Extended Product Type:AF205-30-11-(11/12/13)
• Product ID:1SFL527002R1311
• Catalog Description:AF205-30-11 Contactor
• Long Description:A 3-phase Contactor suitable for various applications such as Motor starting, Isolation, By-pass and Distribution application up to max 1000 V. Operated with wide control voltage range 100-250 V, 50/60 Hz and DC

Dimension

• Product Net Width:105.0 mm
• Product Net Depth:152.0 mm
• Product Net Height:196.0 mm
• Product Net Weight:2.778 kg

Specification

• Number of Main Contacts NO:3
• Number of Main Contacts NC:0
• Number of Auxiliary Contacts NO:1
• Number of Auxiliary Contacts NC:1
• Rated Operational Voltage:Main Circuit 1000 V
• Rated Frequency (f):Main Circuit 50/60 HzConventional Free-air Thermal Current (Ith):acc. to IEC 60947-4-1, Open Contactors q = 40 °C 350 A
• Rated Operational Current AC-1 (Ie):(690 V) 55 °C 300 A,(690 V) 40 °C 350 A,(1000 V) 40 °C 275 A,(1000 V) 55 °C 250 A,(690 V) 70 °C 240 A,(1000 V) 70 °C 200 A.
• Rated Operational Current AC-1 (Ie):(690 V) 55 °C 300 A,(690 V) 40 °C 350 A,(1000 V) 40 °C 275 A,(1000 V) 55 °C 250 A,(690 V) 70 °C 240 A,(1000 V) 70 °C 200 A.
• Maximum Breaking Capacity:cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 3500 A,cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 2500 A
• Maximum Electrical Switching Frequency:AC-3 300 cycles per hour,AC-1 300 cycles per hour,AC-2 / AC-4 150 cycles per hour,
• Rated Operational Current DC-1 (Ie):(110 V) 2 Poles in Series, 40 °C 275 A(220 V) 3 Poles in Series, 40 °C 275 A,
• Rated Operational Current DC-3 (Ie):(110 V) 2 Poles in Series, 40 °C 275 A(220 V) 3 Poles in Series, 40 °C 275 A,
• Rated Operational Current DC-5 (Ie):(110 V) 2 Poles in Series, 40 °C 275 A,(220 V) 3 Poles in Series, 40 °C 275 A,
• Rated Insulation Voltage (Ui):acc. to UL/CSA 600 Vacc. to IEC 60947-4-1 and VDE 0110 (Gr. C) 1000 V,
• Rated Impulse Withstand Voltage (Uimp):Main Circuit 8 kV
• Mechanical Durability:5 million
• Maximum Mechanical Switching Frequency:300 cycles per hour
• Coil Operating Limits:(acc. to IEC 60947-4-1) 0.85 x Uc Min. ... 1.1 x Uc Max. (at θ ≤ 70 °C) °CRated
•  Control Circuit Voltage (Uc):60 Hz 100…250 V50 Hz 100…250 VDC Operation 100…250 V
• Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20,acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP00
• Terminal Type:Main Circuit: Bars

Environmental

• Ambient Air Temperature:Close to Contactor Fitted with Thermal O/L Relay (0.85 ... 1.1 Uc) -25…+50 °CClose to Contactor without Thermal O/L Relay (0.85 ... 1.1 Uc) -40…+70 °CClose to Contactor for Storage -40…+70 °C
• Maximum Operating Altitude Permissible:3000 m
• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Item Code: 1SFL527002R1311
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type:UA26-30-10RA 220-230V 50Hz / 230-240V 60Hz
• Product ID:1SBL241024R8010
• Catalog Description:UA26-30-10RA 220-230V 50Hz / 230-240V 60Hz Contactor
• Long Description:UA26..RA 3-pole contactors for capacitor switching, can be used in installations in which the peak current far exceeds 100 times nominal rms current. The contactors are delivered complete with their damping resistors and must be used without additional inductances (see table below). The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. Their electrical durability is 250 000 operating cycles for Ue < 500 V and 100 000 operating cycles for 500 V ≤ Ue ≤ 690 V. The UA..RA contactors are fitted with a special front mounted block, which ensures the serial insertion of 3 damping resistors into the circuit to limit the current peak on energization of the capacitor bank. Their connection also ensures capacitor precharging in order to limit the second current peak occurring upon making of the main poles. The insertion of resistors allows to damp the highest current peak of the capacitor when switching on, whatever its level.

Dimensions

• Product Net Width:54 mm
• Product Net Depth:126.3 mm
• Product Net Height:120 mm
• Product Net Weight:0.710 kg

Specification

• Number of Main Contacts NO:3
• Number of Main Contacts NC:0
• Number of Auxiliary Contacts NO:1
• Number of Auxiliary Contacts NC:0
• Rated Operational Voltage:Auxiliary Circuit 690 V
  Main Circuit 690 V
• Rated Frequency (f):Supply Circuit 50 Hz
  Supply Circuit 60 Hz
• Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-5-1, q = 40 °C 16 A
• Rated Operational Current AC-15 (Ie):(220 / 240 V) 4 A
  (24 / 127 V) 6 A
  (380 / 440 V) 3 A
  (500 V) 2 A
  (690 V) 2 A
• Short-Circuit Protective Devices:Auxiliary Circuit - gG Type Fuses 10 A
  gG Type Fuses 125 A

• Maximum Electrical Switching Frequency:240 cycles per hour
• Rated Operational Current DC-13 (Ie):(125 V) 1.1 / 138 A
  (24 V) 6 / 144 A
  (250 V) 0.55 / 138 A
  (48 V) 2.8 / 134 A
  (72 V) 2 / 144 A
• Rated Impulse Withstand Voltage (Uimp):8 kV
• Coil Operating Limits:(acc. to IEC 60947-4-1) 0.85 ... 1.1 x Uc (at θ ≤ 55 °C) °C
• Rated Control Circuit Voltage (Uc):50 Hz 220 … 230 V
  60 Hz 230 … 240 V
• Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20
• Terminal Type:Screw Terminals

Environmental

• Climatic Withstand:acc. to IEC 60068-2-30 and 60068-2-11 - UTE C 63-100 specification II
• Maximum Operating Altitude Permissible:3000 m

Additional Information:

• Item Code: 1SBL241024R8010
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

Extended Product Type:CA4-40EProduct ID:1SBN010140R1040Catalog Description:CA4-40E Auxiliary Contact BlockLong Description:CA4-40E Auxiliary Contact Block
Dimensions
Product Net Weight:0.055 kg
Specification

Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²
Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²
Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²
Rigid 1/2x 1...2.5 mm²Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-5-1, q = 40 °C 16 AIIT Publishing Status:Level 0 - Information enabledMaximum Electrical Switching Frequency:AC-15 1200 cycles per hour
DC-13 900 cycles per hourMaximum Mechanical Switching Frequency:3600 cycles per hourMounted Auxiliary Contacts:4 NO, 0 NCNumber of Auxiliary Contacts NC:0Number of Auxiliary Contacts NO:4Order Multiple:1 pieceProduct Main Type:Accessories for Block ContactorsProduct Name:Auxiliary Contact BlockRated Frequency (f):Auxiliary Circuit 50 / 60 HzRated Impulse Withstand Voltage (Uimp):6 kVRated Insulation Voltage (Ui):acc. to UL/CSA 600 V
acc. to IEC 60947-5-1 and VDE 0110 (Gr. C) 690 VRated Operational Current AC-15 (Ie):(220 / 240 V) 4 A
(24 / 127 V) 6 A
(400 / 440 V) 3 A
(500 V) 2 A
(690 V) 2 ARated Operational Current DC-13 (Ie):(110 V) 0.55 A / 60 W
(125 V) 0.55 A / 69 W
(220 V) 0.27 A / 60 W
(24 V) 6 A / 144 W
(250 V) 0.27 A / 68 W
(400 V) 0.15 A / 60 W
(48 V) 2.8 A / 134 W
(500 V) 0.13 A / 65 W
(600 V) 0.1 A / 60 W
(72 V) 1 A / 72 WRated Operational Voltage:Auxiliary Circuit 24 ... 690 VRated Short-time Withstand Current (Icw):for 0.1 s 140 A
for 1 s 100 ARoHS Date:20090609Suitable For:AF09
AF16
AF26
AF30
AF38
AF40
AF52
AF65
AF80
AF96Terminal Type:Screw TerminalsTightening Torque:Auxiliary Circuit 1.2 N·mWire Stripping Length:Auxiliary Circuit 10 mm

Additional Information:

• Item Code: 1SBN010140R1040
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type:A26-30-10 220-230V 50Hz / 230-240V 60Hz
• Product ID:1SBL241001R8010
• Catalog Description:A26-30-10 220-230V 50Hz / 230-240V 60Hz Contactor
• Long Description:A26 contactors are mainly used for controlling 3-phase motors and generally for controlling power circuits up to 690 V AC or 220 V DC. The contactors can also be used for many other applications such as isolation, capacitor switching, lighting. The A... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.

Dimensions

• Product Net Width:54 mm
• Product Net Depth:93.6 mm
• Product Net Height:90 mm
• Product Net Weight:0.600 kg

Specification

• Number of Main Contacts NO:3
• Number of Main Contacts NC:0
• Number of Auxiliary Contacts NO:1
• Number of Auxiliary Contacts NC:0
• Rated Operational Voltage:Main Circuit 690 V
• Rated Frequency (f):Supply Circuit 50 Hz
  Supply Circuit 60 Hz
• Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-4-1, Open Contactors q = 40 °C 45 A
  acc. to IEC 60947-5-1, q = 40 °C 16 A
• Rated Operational Current AC-1 (Ie):(690 V) 40 °C 45 A
  (690 V) 55 °C 40 A
  (690 V) 70 °C 32 A
• Rated Operational Current AC-3 (Ie):(220 / 230 / 240 V) 55 °C 26 A
  (380 / 400 V) 55 °C 26 A
  (415 V) 55 °C 26 A
  (440 V) 55 °C 26 A
  (500 V) 55 °C 22 A
  (690 V) 55 °C 17 A
• Rated Operational Power AC-3 (Pe):(220 / 230 / 240 V) 6.5 kW
  (380 / 400 V) 11 kW
  (415 V) 11 kW
  (440 V) 15 kW
  (500 V) 15 kW
  (690 V) 15 kW
• Rated Breaking Capacity AC-3 acc. to IEC 60947-4-1:8 x Ie AC-3
• Rated Making Capacity AC-3 acc. to IEC 60947-4-1:10 x Ie AC-3
• Rated Operational Current AC-15 (Ie):(220 / 240 V) 4 A
  (24 / 127 V) 6 A
  (380 / 440 V) 3 A
  (500 V) 2 A
  (690 V) 2 A
• Short-Circuit Protective Devices:Auxiliary Circuit - gG Type Fuses 10 A
  gG Type Fuses 50 A
• Maximum Breaking Capacity:cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 420 A
  cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 170 A
• Maximum Electrical Switching Frequency:AC-1 600 cycles per hour
  AC-2 / AC-4 300 cycles per hour
  AC-3 1200 cycles per hour
• Connecting Capacity Main Circuit:Flexible with Cable End 0.75 ... 4 mm²
  Rigid Cable 1.5 ... 6 mm²
• Connecting Capacity Auxiliary Circuit:Flexible with Cable End 0.75 ... 2.5 mm²
  Rigid Cable 1 ... 4 mm²
• Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20
• Connecting terminals (delivered in open position) Main poles:M 4 (+,-) pozidriv 2 screws with cable clamp
• Terminal Type:Screw Terminals

Environmental

• Ambient Air Temperature:Close to Contactor Fitted with Thermal O/L Relay -25 ... +55 °C
  Close to Contactor for Storage -60 ... +80 °C
  Close to Contactor without Thermal O/L Relay (0.85 ... 1.1 Uc) -40 ... +55 °C
  Close to Contactor without Thermal O/L Relay (Uc) -40 ... +70 °C
• Climatic Withstand:acc. to IEC 60068-2-30 and 60068-2-11 - UTE C 63-100 specification II
• Maximum Operating Altitude Permissible:3000 m
• Resistance to Shock acc. to IEC 60068-2-27:Shock Direction: A 20 g
  Closed, Shock Direction: B1 10 g
  Open, Shock Direction: B1 5 g
  Shock Direction: B2 15 g
  Shock Direction: C1 20 g
  Shock Direction: C2 20 g
• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Item Code: 1SBL241001R8010
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type:UA16-30-10RA 220-230V 50Hz / 230-240V 60Hz
• Product ID:1SBL181024R8010
• Catalog Description:UA16-30-10RA 220-230V 50Hz / 230-240V 60Hz Contactor
• Long Description:UA16..RA 3-pole contactors for capacitor switching, can be used in installations in which the peak current far exceeds 100 times nominal rms current. The contactors are delivered complete with their damping resistors and must be used without additional inductances (see table below). The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. Their electrical durability is 250 000 operating cycles for Ue < 500 V and 100 000 operating cycles for 500 V ≤ Ue ≤ 690 V. The UA..RA contactors are fitted with a special front mounted block, which ensures the serial insertion of 3 damping resistors into the circuit to limit the current peak on energization of the capacitor bank. Their connection also ensures capacitor precharging in order to limit the second current peak occurring upon making of the main poles. The insertion of resistors allows to damp the highest current peak of the capacitor when switching on, whatever its level. The UA..RA series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 1 built-in auxiliary contact - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.

Dimensions

• Product Net Width:44 mm
• Product Net Depth:107 mm
• Product Net Height:120 mm
• Product Net Weight:0.460 kg

Specification

• Number of Main Contacts NO:3
• Number of Main Contacts NC:0
• Number of Auxiliary Contacts NO:1
• Number of Auxiliary Contacts NC:0
• Rated Operational Voltage:Main Circuit 690 V, Auxiliary Circuit 690 V
• Rated Frequency (f):Supply Circuit 50 Hz, Supply Circuit 60 Hz
• Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-5-1, q = 40 °C 16 A
• Rated Operational Current AC-15 (Ie):(220 / 240 V) 4 A, (24 / 127 V) 6 A, (380 / 440 V) 3 A, (500 V) 2 A, (690 V) 2 A
• Short-Circuit Protective Devices:Auxiliary Circuit - gG, Type Fuses 10 AgG Type Fuses 80 A
• Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20
• Connecting terminals (delivered in open position) Main poles:M 3.5 (+,-) pozidriv 2 screws with cable clamp
• Terminal Type:Screw Terminals

Environmental

• Ambient Air Temperature:Near Contactor for Operation in Free Air (0.85 ... 1.1 Uc) -40 ... +55 °C, Near Contactor for Operation in Free Air (Uc) -40 ... +70 °C, Close to Contactor for Storage -60 ... +80 °C.
• Climatic Withstand:acc. to IEC 60068-2-30 and 60068-2-11 - UTE C 63-100 specification II
• Maximum Operating Altitude Permissible:3000 mRoHS Status:No declaration needed

Additional Information:

• Item Code: 1SBL181024R8010
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

Extended Product Type:CAL19-11Product ID:1SFN010820R1011Catalog Description:CAL19-11 Auxiliary Contact BlockLong Description:Auxiliary contact block for contactors AF116…AF370
Dimensions
Product Net Weight:0.040 kg
Environmental
Battery Information:Type NONERoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment
Specification

Product Name:Auxiliary Contact BlockRoHS Date:1226 1Suitable For:AF116
AF140
AF146
AF190
AF205
AF265
AF305
AF370Suitable for Product Class:CONTACTORSTerminal Type:Screw Terminals

Additional Information:

• Item Code: 1SFN010820R1011
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

• Extended Product Type:UA30-30-10 220-230V 50Hz / 230-240V 60Hz
• Product ID:1SBL281022R8010EAN:3471522074805
• Catalog Description:UA30-30-10 220-230V 50Hz / 230-240V 60Hz Contactor
• Long Description:UA30 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 1 built-in auxiliary contact - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.

Dimensions

• Product Net Width:54 mm
• Product Net Depth:108.3 mm
• Product Net Height:90 mm
• Product Net Weight:0.710 kg

Specificaion

• Number of Main Contacts NO:3
• Number of Auxiliary Contacts NO:1
• Rated Operational Voltage:Main Circuit 690 V,Auxiliary Circuit 690 V
• Rated Frequency (f):Supply Circuit 50 HzSupply Circuit 60 HzConventional Free-air Thermal Current (Ith):acc. to IEC 60947-5-1, q = 40 °C 16 A
• Rated Operational Current AC-15 (Ie):(220 / 240 V) 4 A,(24 / 127 V) 6 A,(380 / 440 V) 3 A,(500 V) 2 A,(690 V) 2 A
• Short-Circuit Protective Devices:Auxiliary Circuit - gG Type Fuses 10 AgG ,Type Fuses 1.5 ... 1.8 A
• Rated Operational Current DC-13 (Ie):(125 V) 1.1 / 138 A,(24 V) 6 / 144 A,(250 V) 0.55 / 138 A,(48 V) 2.8 / 134 A,(72 V) 2 / 144 A
• Rated Impulse Withstand Voltage (Uimp):8 kVMechanical Durability:10 million
• Maximum Mechanical Switching Frequency:3600 cycles per hour
• Coil Operating Limits:(acc. to IEC 60947-4-1) 0.85 ... 1.1 x Uc (at θ ≤ 55 °C) °C
• Rated Control Circuit Voltage (Uc):50 Hz 220 … 230 V60 Hz 230 … 240 V

Environmental

• Ambient Air Temperature:Near Contactor for Operation in Free Air (0.85 ... 1.1 Uc) -40 ... +55 °C
• Maximum Operating Altitude Permissible:3000 m

Additional Information:

• Item Code: 1SBL2810248010
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information
Extended Product TypeCA4-04EProduct ID1SBN010140R1004Catalog DescriptionCA4-04E Auxiliary Contact BlockLong DescriptionCA4-04E Auxiliary Contact Block
Dimensions
Product Net Weight0.055 kg
Specification

Connecting Capacity Auxiliary CircuitFlexible with Ferrule 1/2x 0.75 ... 2.5 mm¿¿
Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm¿¿
Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm¿¿
Rigid 1/2x 1...2.5 mm¿¿Conventional Free-air Thermal Current (Ith)acc. to IEC 60947-5-1, q = 40 DegreeC 16 AIIT Publishing StatusLevel 0 - Information enabledMaximum Electrical Switching FrequencyAC-15 1200 cycles per hour
DC-13 900 cycles per hourMaximum Mechanical Switching Frequency3600 cycles per hourMounted Auxiliary Contacts0 NO, 4 NCNumber of Auxiliary Contacts NC4Number of Auxiliary Contacts NO0Order Multiple1 pieceProduct Main TypeAccessories for Block ContactorsProduct NameAuxiliary Contact BlockRated Frequency (f)Auxiliary Circuit 50 / 60 HzRated Impulse Withstand Voltage (Uimp)6 kVRated Insulation Voltage (Ui)acc. to UL/CSA 600 V
acc. to IEC 60947-5-1 and VDE 0110 (Gr. C) 690 VRated Operational Current AC-15 (Ie)(220 / 240 V) 4 A
(24 / 127 V) 6 A
(400 / 440 V) 3 A
(500 V) 2 A
(690 V) 2 ARated Operational Current DC-13 (Ie)(110 V) 0.55 A / 60 W
(125 V) 0.55 A / 69 W
(220 V) 0.27 A / 60 W
(24 V) 6 A / 144 W
(250 V) 0.27 A / 68 W
(400 V) 0.15 A / 60 W
(48 V) 2.8 A / 134 W
(500 V) 0.13 A / 65 W
(600 V) 0.1 A / 60 W
(72 V) 1 A / 72 WRated Operational VoltageAuxiliary Circuit 24 ... 690 VRated Short-time Withstand Current (Icw)for 0.1 s 140 A
for 1 s 100 ARoHS Date20090609Suitable ForAF09
AF16
AF26
AF30
AF38
AF40
AF52
AF65
AF80
AF96Terminal TypeScrew TerminalsTightening TorqueAuxiliary Circuit 1.2 N¿¿mWire Stripping LengthAuxiliary Circuit 10 mm

Additional Information:

• Item Code: 1SBN010140R1004
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We offer all kind of ABB MOTOR with best rate & immediate delivery

Product Details:

ABB Installation Contactors are designed to match with ABB Modular DIN rail components and can be integrated easily in dedicated panels. They are mainly used in buildings for switching and controlling lighting, heating, ventilation, motor and pumps.

The range offers two types of installation contactors for different applications:
Type ESB - Standard contactor with 4 ratings from 20 A to 63 A.
Type EN - Manually/Automatic operated contactor with 3 ratings from 20 A to 40 A.

ESB20 / EN20 Installation contactor for switching:

• AC-1 / AC-7a loads up to 20 A / 250 V
• AC-7b loads up to 1.1 kW / 230 V
• 1 module width

ESB24 / EN24 Installation contactor for switching:

• AC-1 / AC-7a loads up to 24 A / 400 V
• AC-3 / AC-7b load up to 4 kW / 400V
• 2 module width

ESB40 / EN40 Installation contactor for switching:

• AC-1 / AC-7a loads up to 40 A / 400 V
• AC-3 / AC-7b load up to 11 kW / 400V
• 3 module width

ESB63 Installation contactor for switching:

• AC-1 / AC-7a loads up to 63 A / 400 V
• AC-3 / AC-7b load up to 15 kW / 400V
• 3 module width

Characteristics of Installation Contactors

• Rated operational voltage - Main Circuit: 250 V / 400 V
• AC or AC/DC coils for various voltages*
• Many contacts variations are available
• Silent or noiseless control circuit*
• Ambient air temperature - operation: -25 ... +55° C
• Integrated overvoltage protection 5kV*
• Switch position indication
• DIN rail mounting (EN60715 35mm), without accessories
• Comply with standards IEC/EN60947-4-1, IEC/EN61095, UL508 and CSA C22.2 N°14
• Various approvals: UL, CSA, CCC, marine

Available accessories for ESB/EN24…63

• 2-pole auxiliary contacts
• Sealing cover
• Distance piece

*selected devices only

Product Details:

The range of Distribution Boards we offer has a great demand in the market for its comprehensive variety and premium quality. Our clients often appreciate the variety of boards that is capable of meeting varied requirements. These boards can be availed from us at very affordable prices.

Following are the type of boards available with us:

• SPN Distribution Boards
• TPN Distribution Boards
• Horizontal & Vertical Per Phase Isolation Distribution Boards
• TPN Vertical Distribution Boards With MCCB & MCB Incomer
• Seven Segment Distribution Boards
• MCB Metal Enclosures, Plugs, & Sockets
• Acrylic Distribution Boards
• Flexy - Tier Distribution Boards.

Product Details:

Circuit Breakers

ABB offers the best solution for rapidly restoring the service conditions if a fault occurs, while guaranteeing optimum protection standards for the electrical installation.

From air to moulded-case circuit-breakers, all technical problems are resolved thanks to the ABB CB range. A reliable and advanced response is now available in the control and operating stages of the electrical installation.

Product Details:

Motorized switch disconnectors (type OTM_) are suitable for remote control.

The switches can be operated either electrically by using the motor operator or manually by using the handle. The operation, either electrical or manual, can be chosen by the selector switch “Motor/Manual” on the motor operator. Motorized switch-disconnectors consist of the switch-disconnector (type OT) and the motor operator. The OTM range is for 160..2500 Amperes. Designed for safety
The motorized switch-disconnectors OTM ensure safe operation, protecting both people and equipment.
Designed and based on substantial experience of electrical safety, the switches eliminate the risk of electrical accidents:
The frames are made of robust plastic with excellent mechanical and thermal properties.
Pole markings as standard
Inbuilt safety – eliminating the risk for accidents.

Easy, flexible installation

The motorized switch-disconnectors OTM offer you flexible cabling options. The high terminal positioning with space to the back plate
simplifies the mounting of cables. It’s also ideal for double cabling, which in turn saves on space.
Reduced installation time reduces cost.

Suitable for remote locations - Connectivity to automation system

The OTM motorized switch-disconnectors can be operated remotely by using a suitable device e.g. push-buttons or a cam switch.
It is also easy to control the motor operator for example with PLC or PC-based controller.
Increased productivity.

High electrical ratings
High Ui ratings
High CTI in supporting parts
The powerful construction in motorized switch-disconnectors OTM, with their quick-make and quick-break operation features and two contact points instead of one
Suitable for numerous applications.

Product Details:

Taking advantage of our state-of-the-art manufacturing facility, we are engaged in offering a huge gamut of DC Contactors. This High-quality Curtis/Albright contactors for vehicle and industrial applications are offered at ratings of 100, 125, 150 and 250 A. Our contactors are widely used worldwide and have proven to be the best in the toughest conditions. Built for reliability, these units are offered with high continuous ratings in compact, durable packages. Our Coils are available in diverse ranges from 6 to 240 V.

Product Details:

General Information

• Extended Product Type:A40-30-10 220-230V 50Hz / 230-240V 60Hz
• Product ID:1SBL321001R8010
• Catalog Description:A40-30-10 220-230V 50Hz / 230-240V 60Hz Contactor
• Long Description:A40 contactors are mainly used for controlling 3-phase motors and generally for controlling power circuits up to 690 V AC or 220 V DC. The contactors can also be used for many other applications such as isolation, capacitor switching, lighting. The A... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.

Dimensions

• Product Net Width:54 mm
• Product Net Depth:108.3 mm
• Product Net Height:90 mm
• Product Net Weight:0.710 kg

Specification

• Number of Main Contacts NO:3
• Number of Main Contacts NC:0
• Number of Auxiliary Contacts NO:1
• Number of Auxiliary Contacts NC:0
• Standards:Devices complying with international standards IEC 947-1 / 947-4-1, and European standards EN 60 947-1 / 60 947-4-1. Electromagnetic compatibility (EMC) acc. to amendment A11 to IEC 947-1; EN 60 947-1 and amendment 2 to IEC 947-4-1
• Rated Operational Voltage:Main Circuit 690 V
• Rated Frequency (f):Supply Circuit 50 Hz
  Supply Circuit 60 Hz
• Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-4-1, Open Contactors q = 40 °C 65 A
  acc. to IEC 60947-5-1, q = 40 °C 16 A
• Rated Operational Current AC-1 (Ie):(690 V) 40 °C 60 A
  (690 V) 55 °C 60 A
  (690 V) 70 °C 42 A
• Rated Operational Current AC-3 (Ie):(220 / 230 / 240 V) 55 °C 40 A
  (380 / 400 V) 55 °C 37 A
  (415 V) 55 °C 37 A
  (440 V) 55 °C 37 A
  (500 V) 55 °C 33 A
  (690 V) 55 °C 25 A
• Rated Operational Power AC-3 (Pe):(220 / 230 / 240 V) 11 kW
  (380 / 400 V) 18.5 kW
  (415 V) 18.5 kW
  (440 V) 22 kW
  (500 V) 22 kW
  (690 V) 22 kW
• Short-Circuit Protective Devices:Auxiliary Circuit - gG Type Fuses 10 A
  gG Type Fuses 63 A
• Maximum Breaking Capacity:cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 820 A
  cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 340 A
• Maximum Electrical Switching Frequency:AC-1 600 cycles per hour
  AC-2 / AC-4 300 cycles per hour
  AC-3 1200 cycles per hour
• Rated Operational Current DC-13 (Ie):(125 V) 1.1 / 138 A
  (24 V) 6 / 144 A
  (250 V) 0.55 / 138 A
  (48 V) 2.8 / 134 A
  (72 V) 2 / 144 A
• Rated Insulation Voltage (Ui):acc. to IEC 60947-4-1 and VDE 0110 (Gr. C) 1000 V
  acc. to UL/CSA 600 V
• Rated Impulse Withstand Voltage (Uimp):8 kV
• Maximum Mechanical Switching Frequency:3600 cycles per hour
• Coil Operating Limits:(acc. to IEC 60947-4-1) 0.85 ... 1.1 x Uc (at θ ≤ 55 °C) °C
• Rated Control Circuit Voltage (Uc):50 Hz 220 … 230 V
  60 Hz 230 … 240 V
• Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20
• Connecting terminals (delivered in open position) Main poles:M 5 (+,-) pozidriv 2 screw with 2x (5.6x6.5 mm) connector
• Terminal Type:Screw Terminals

Environmental

• Climatic Withstand:acc. to IEC 60068-2-30 and 60068-2-11 - UTE C 63-100 specification II
• Maximum Operating Altitude Permissible:3000 m

Additional Information:

• Item Code: 1SBL321001R8010
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are the trader, wholesaler and exporter of ABB MO 132-0.16 TO MO 132-32 These Produts are avilable in Motor Starter.

Specifications:

• Product Net Width:45 mm
• Product Net Height:90 mm
• Product Net Depth:86.75 mm
• Product Net Weight:0.215 kg
• Rated Instantaneous Short-Circuit Current Setting (Ii):3.1 A
• Setting Range: None
• Rated Operational Power AC-3 (Pe):(400 V) Three Phase 0.06 kW
• Rated Operational Voltage: Main Circuit 690 V AC
• Rated Operational Current (Ie):0.10 to 32 A

Product Details:

We are the trader, wholesaler and exporter of ABB UA16-30-10 TO UA110-30-00 These Products are available in
Contactors .

Specifications:

• Product Net Width:44
• Product Net Height:107 mm
• Product Net Depth:120 mm
• Product Net Weight:0.460 kg
• Rated Operational Power AC-3 (Pe):(400 V)
• Three Phase 2.2 kW
• Rated Operational Voltage: Main Circuit 690 V AC
• Rated Frequency (f): Main Circuit 50 Hz
• Main Circuit: 60 Hz

Product Details:

General Information

• Extended Product Type:UA95-30-00RA 220-230V 50Hz
• Product ID:1SFL431024R8000
• Catalog Description:UA95-30-00RA 220-230V 50Hz Contactor
• Long Description:A 3-phase Contactor suitable for Capacitor switching application. Maximum permissible peak current 100 times the nominal RMS current. Operated with a control voltage, versions from 24…….690 V

Dimensions

• Product Net Width:90.0 mm
• Product Net Depth:155.6 mm
• Product Net Height:170.0 mm
• Product Net Weight:2.000 kg

Specification

• Number of Main Contacts NO:3
• Number of Main Contacts NC:0
• Number of Auxiliary Contacts NO:0
• Number of Auxiliary Contacts NC:0
• Rated Operational Voltage:Main Circuit 1000 V
• Rated Frequency (f):Main Circuit 50 Hz
• Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-4-1, Open Contactors q = 40 °C 145 A
• Rated Operational Current AC-1 (Ie):(690 V) 55 °C 135 A
  (690 V) 40 °C 145 A
  (690 V) 70 °C 115 A
• Rated Operational Current AC-3 (Ie):(1000 V) 55 °C 30 A
  (690 V) 55 °C 65 A
  (415 V) 55 °C 96 A
  (220 / 230 / 240 V) 55 °C 96 A
  (440 V) 55 °C 93 A
  (380 / 400 V) 55 °C 96 A
  (500 V) 55 °C 80 A
• Rated Breaking Capacity AC-3 acc. to IEC 60947-4-1:8 x Ie AC-3
• Rated Making Capacity AC-3 acc. to IEC 60947-4-1:10 x Ie AC-3
• Maximum Breaking Capacity:cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 1160 A
  cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 800 A
• Maximum Electrical Switching Frequency:AC-3 300 cycles per hour
  AC-1 300 cycles per hour
  AC-2 / AC-4 150 cycles per hour
• Rated Insulation Voltage (Ui):acc. to UL/CSA 600 V
  acc. to IEC 60947-4-1 and VDE 0110 (Gr. C) 1000 V
• Rated Impulse Withstand Voltage (Uimp):Main Circuit 8 kV
• Mechanical Durability:10 million
• Maximum Mechanical Switching Frequency:3600 cycles per hour
• Coil Operating Limits:(acc. to IEC 60947-4-1) 0.85 x Uc Min. ... 1.1 x Uc Max. (at θ ≤ 70 °C) °C
• Rated Control Circuit Voltage (Uc):60 Hz 230 … 240 V
  50 Hz 220 … 230 V
• Coil Consumption:Pull-in at Max. Rated Control Circuit Voltage 60 Hz 450 V·A
  Holding at Max. Rated Control Circuit Voltage 50 Hz 22 V·A
  Pull-in at Max. Rated Control Circuit Voltage 50 Hz 350 V·A
  Holding at Max. Rated Control Circuit Voltage 60 Hz 26 V·A
• Operate Time:Between Coil Energization and NO Contact Closing 10 … 25 ms
  Between Coil De-energization and NC Contact Closing 7 … 15 ms
• Connecting Capacity Main Circuit:Flexible with Cable End 2x6…35 mm²
  Bar 30 mm²
  Rigid 2x6…65 mm²
• Connecting Capacity Auxiliary Circuit:Solid 2x1…4 mm²
  Flexible with Insulated Ferrule 2x0.75…2.5 mm²
  Stranded 2x1…4 mm²
  Flexible 2x0.75…2.5 mm²
  Flexible with Ferrule 1x0.75…2.5 mm²
• Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20
  acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP10
• Connecting terminals (delivered in open position) Main poles:M8 hexagon socket screw with single connector
• Terminal Type:Cable Clamp

Environmental

• Ambient Air Temperature:Close to Contactor Fitted with Thermal O/L Relay (0.85 ... 1.1 Uc) -25…+50 °C
  Close to Contactor without Thermal O/L Relay (0.85 ... 1.1 Uc) -40…+70 °C
  Close to Contactor for Storage -60…+80 °C

Additional Information:

• Item Code: 1SFL431024R8000
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are leading Supplier and Distributor of ABB Contactors, AC& DC Contactors, Capacitor Duty Contactors and Mini Contactors.

Contactors and Overload Relays are suitable for a large variety of applications in building and in industry such as motor control, heating and ventilating, air conditioning, pumping, lifting equipment, lighting, process power factor correction, etc, ...

The range comprises 4 and 5.5 kW mini-contactors, block contactors up to 560 kW (AC3), installation contactors for domestics and industrial use, bar-mounted contactors, thermal and electronics overload relays, and a wide range of add-on accessories ensuring flexibility and adaptability to customer specifications.

Simplify design
By reducing the contactor's coil energy consumption by up to 80%, panels can be built smaller and transformers more compact. All the features of the AF technology, along with access to drawings and coordination tables online, simplifies your design and assembly process.

The AF contactor secures your uptime, gives you global support, optimizes your logistics and simplifies your design.

Product Details:

We are the trader, wholesaler and exporter of ABB CA4-10 TO CA4-11 These Products are available in Accessories.

Specifications:

• Product Net Width:100mm
• Product Net Height:10 mm
• Product Net Depth:10 mm
• Product Net Weight:0.014 kg
• Rated Operational Power AC-3 (Pe):(400 V)
• Rated Frequency (f): Main Circuit 50 Hz
• Main Circuit: 60 Hz

Product Details:

General Information

• Extended Product Type:UA75-30-00RA 220-230V 50Hz / 230-240V 60Hz
• Product ID:1SBL411024R8000
• Catalog Description:UA75-30-00RA 220-230V 50Hz / 230-240V 60Hz Contactor
• Long Description:UA75..RA 3-pole contactors for capacitor switching, can be used in installations in which the peak current far exceeds 100 times nominal rms current. The contactors are delivered complete with their damping resistors and must be used without additional inductances (see table below). The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. Their electrical durability is 250 000 operating cycles for Ue < 500 V and 100 000 operating cycles for 500 V ≤ Ue ≤ 690 V. The UA..RA contactors are fitted with a special front mounted block, which ensures the serial insertion of 3 damping resistors into the circuit to limit the current peak on energization of the capacitor bank. Their connection also ensures capacitor precharging in order to limit the second current peak occurring upon making of the main poles. The insertion of resistors allows to damp the highest current peak of the capacitor when switching on, whatever its level. The UA..RA series 3-pole contactors are of the block type design. - Main poles: 3 main poles - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.

Dimensions

• Product Net Width:70 mm
• Product Net Depth:140.4 mm
• Product Net Height:150 mm
• Product Net Weight:1.350 kg

Specification

• Number of Main Contacts NO:3
• Rated Operational Voltage:Main Circuit 690 V
• Short-Circuit Protective Devices:gG Type Fuses 200 A
• Rated Short-time Withstand Current (Icw):at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 650 A
• Maximum Breaking Capacity:cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 1300 A
  cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 630 A
• Maximum Electrical Switching Frequency:240 cycles per hour
• Rated Insulation Voltage (Ui):acc. to IEC 60947-4-1 and VDE 0110 (Gr. C) 1000 V
  acc. to UL/CSA 600 V
• Rated Impulse Withstand Voltage (Uimp):8 kV
• Coil Operating Limits:(acc. to IEC 60947-4-1) 0.85 ... 1.1 x Uc (at θ ≤ 55 °C) °C
• Rated Control Circuit Voltage (Uc):50 Hz 220 … 230 V
  60 Hz 230 … 240 V
• Coil Consumption:Average Holding Value 50 / 60 Hz 18 V·A
• Operate Time:Between Coil Energization and NO Contact Closing 8 ... 27 ms
  Between Coil De-energization and NO Contact Opening 4 ... 11 ms
• Connecting Capacity Main Circuit:Rigid Cable 6 ... 16 mm²
  Flexible with Cable End 6 ... 10 mm²
• Connecting Capacity Auxiliary Circuit:Rigid Cable 1 ... 4 mm²
  Flexible with Cable End 0.75 ... 2.5 mm²
• Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20
• Connecting terminals (delivered in open position) Main poles:M 6 (+,-) pozidriv 2 screws with 1x (13 x 10 mm) connector
• Terminal Type:Screw Terminals

Environmental

• Ambient Air Temperature:Near Contactor for Operation in Free Air (0.85 ... 1.1 Uc) -40 ... +55 °C
  Near Contactor for Operation in Free Air (Uc) -40 ... +70 °C
  Close to Contactor for Storage -60 ... +80 °C
• Climatic Withstand:acc. to IEC 60068-2-30 and 60068-2-11 - UTE C 63-100 specification II
• Maximum Operating Altitude Permissible:3000 m

Additional Information:

• Item Code: 1SBL411024R8600
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are the trader, wholesaler and exporter of ABB MS 116-0.16 TO MS 116-32 These Products are available in Motor Starter.

Specifications:

• Product Net Width:45 mm
• Product Net Height:90 mm
• Product Net Depth:85.6 mm
• Product Net Weight:0.265 kg
• Rated Instantaneous Short-Circuit Current Setting (Ii):20 A
• Setting Range:0.10 TO ... 32 A
• Rated Operational Power AC-3 (Pe):(400 V)
• Three Phase 0.55 kW
• Rated Operational Voltage: Main Circuit 690 V AC
• Rated Operational Current (Ie):0.10 TO 32 A
• Rated Operational Current AC-3 (Ie):0.10 TO 32 A
• Rated Frequency (f): Main Circuit 50 Hz
• Main Circuit: 60 Hz

Product Details:

We are the trader, wholesaler and exporter of ABB AF205-30-11TO AF2650-30-11 These Products are available in 3 Pole Contactors .

Specifications:

• Product Net Width:44
• Product Net Height:74 mm
• Product Net Depth:74 mm
• Product Net Weight:0.340 kg
• Rated Operational Power AC-3 (Pe):(400 V)
• Three Phase 2.2 kW
• Rated Operational Voltage: Main Circuit 690 V AC
• Rated Operational Current AC-3 (Ie):0.10 TO 32 A
• Rated Frequency (f): Main Circuit 50 Hz
• Main Circuit: 60 Hz

Product Details:

We are the trader, wholesaler and exporter of ABB MS 132-0.16 to MS 132-32 These Products are available in Motor Starter.

Specifications:

• Product Net Width:45 mm
• Product Net Height:90 mm
• Product Net Depth:86.75 mm
• Product Net Weight:0.215 kg
• Rated Instantaneous Short-Circuit Current Setting (Ii):2 A
• Setting Range:0.1 ... 32A
• Rated Operational Power AC-3 (Pe):(400 V) Three Phase 0.03 kW
• Rated Operational Voltage: Main Circuit 690 V AC
• Main Circuit 250 V DC
• Rated Operational Current (Ie):0.10 to 32 A

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are the trader, wholesaler and exporter of ABB A09-30-10 TO A185-30-11 These Products are available in 3 Pole Contactors . Specifications:
• Product Net Width:44
• Product Net Height:74 mm
• Product Net Depth:74 mm
• Product Net Weight:0.340 kg
• Rated Operational Power AC-3 (Pe):(400 V)
• Three Phase 2.2 kW
• Rated Operational Voltage: Main Circuit 690 V AC
• Rated Operational Current AC-3 (Ie):0.10 TO 32 A
• Rated Frequency (f): Main Circuit 50 Hz
• Main Circuit: 60 Hz

Product Details:

General Information

• Extended Product Type:AF1350-30-11 100-250V 50/60Hz / 100-250V DC
• Product ID:1SFL657001R7011
• Catalog Description:AF1350-30-11 100-250V 50/60Hz / 100-250V DC 
• ContactorLong Description:A 3-phase Contactor suitable for various applications such as Motor starting, Isolation, By-pass and Distribution application up to max 1000 V. Operated with wide control voltage range 100-250 V, AC/DC

Dimensions

• Product Net Width:438.0 mm
• Product Net Depth:244.0 mm
• Product Net Height:392.0 mm
• Product Net Weight:33.000 kg

Specification

• Number of Main Contacts NO:3
• Number of Main Contacts NC:0
• Number of Auxiliary Contacts NO:1
• Number of Auxiliary Contacts NC:1
• Rated Operational Voltage:Main Circuit 1000 V
• Rated Frequency (f):Main Circuit 50/60 Hz
• Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-4-1, Open Contactors q = 40 °C 1350 A
• Rated Operational Current AC-1 (Ie):(690 V) 55 °C 1150 A,(690 V) 40 °C 1350 A,(1000 V) 40 °C 1350 A,(1000 V) 55 °C 1150 A,(690 V) 70 °C 1000 A,(1000 V) 70 °C 1000A
• Rated Operational Current AC-3 (Ie):(690 V) 55 °C 800 A(500 V) 55 °C 800 A,(440 V) 55 °C 860 A,(415 V) 55 °C 860 A,(380 / 400 V) 55 °C 860 A,(220 / 230 / 240 V) 55 °C 860 A,
• Rated Operational Power AC-3 (Pe):(220 / 230 / 240 V) 257 kW,(380 / 400 V) 475 kW,(415 V) 500 kW,(440 V) 560 kW,(500 V) 560 kW,(690 V) 800 kW,(1000 V) 560 kW
• Maximum Electrical Switching Frequency:AC-3 60 cycles per hour,AC-1 60 cycles per hour,AC-2 / AC-4 60 cycles per hour
• Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20,acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP00,
• Terminal Type:Main Circuit: Bars

Environmental

• Ambient Air Temperature:Close to Contactor Fitted with Thermal O/L Relay (0.85 ... 1.1 Uc) -25…+50 °C,Close to Contactor without Thermal O/L Relay (0.85 ... 1.1 Uc) -40…+70 °C,Close to Contactor for Storage -40…+70 °C,
• Maximum Operating Altitude Permissible:3000 mRoHS Status:No declaration needed

Additional Information:

• Item Code: 1SFL657001R7011
• Pay Mode Terms: T/T (Bank Transfer)

ABB make all type of air circuit breakers available

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Minimum Order Quantity: 1 Unit

Product Details:

With immense experience and expertise, we offer a wide range of Cooling Tower Motors. Used for facilitating effective functioning of cooling plants, these products find application in cooling tower, evaporative condensers, chemical plants, pulp and paper mills, pumps and fans. Owing to their resistance against corrosion, low maintenance and longer functional life, these products have gained a huge demand in the market. Customers can avail these Motors with us in different specifications as per their needs.

 

Features:

 

• Affordable Prices
• Robust Construction
• Easy to use

Product Details:

Our esteemed clients can avail ABB Modular Switches in a variety of designs and sizes from us at nominal prices. These switches can be installed and dismantled in homes and offices with equal ease without any safety concerns. This product line is manufactured using high grade plastic. As a result, these products exhibit attributes like excellent durability, performance, and resistance to dust.

Product Details:

Our Earth Fault Relay is a small and compact unit based on latest electronic devices. It senses the current flowing through a totally electrically isolated circuit and energises the electromagnetic relay when the current crosses the set value. The current setting is done with a continuously adjustable knob over a linearly calibrated dial. It incorporates a built-in ON delay timer to avoid spurious trappings in case of transients with time adjustable from 1 to 10 seconds the help of a second knob over a calibrated dial.

Features:

•Accuracy settings
•Current range features
•Varied operating voltage
•Easy to operate

Product Details:

Thermal overload relays are economic electromechanical protection devices for the main circuit. They offer reliable protection for motors in the event of overload or phase failure. Starter combinations are setup together with block contactors and mini contactors.

The thermal overload relays are three pole relays with bimetal tripping elements. The motor current flows through the bimetal tripping elements and heats them directly and indirectly. In case of an overload (over current), the bimetal elements bent as a result of the heating. This leads to a release of the relay and a change of the contacts switching position (95-96 / 97-98).

Characteristics of thermal overload relays: TF range

•Trip class 10
•Ambient air temperature - operation: -25°C … 60°C
•Sealable cover for operating elements

Characteristics of thermal overload relays: T16 range

•Trip class 10
•Ambient air temperature - operation: -25°C … 60°C Characteristics of thermal overload relays: TA…DU range
•Trip class 10A
•Special version with trip class 20 or 30*
•Ambient air temperature - operation: -25°C … 55°C
•Special versions, suitable for protection of EEX e motors* General characteristics of thermal overload relays
•Manual or automatic reset selectable
•Trip-free mechanism
•Phase loss sensitivity acc. to IEC/EN60947-4-1
•2 electrically isolated auxiliary contacts – 1 NO 1 NC
•Test and STOP function
•Trip indication on the front
•Temperature compensation
•Useable for AC- or DC-application*
•Suitable for three- and single-phase applications
•All phase are equipped with bimetal tripping elements
•All terminal screws are accessible from the front Available accessories
•Single mounting kit*
•Busbar kits *
•Terminal shrouds*
•Remote trip and remote reset * * selected devices only

Product Details:

he switch-dis connector is largely used as the main switch in low voltage switchgear for distribution of power, starting and stopping motors and isolating loads during maintenance. They are also enclosed in metal or plastic boxes as safety switches to ensure that accidental start of machines is prevented. The range from 16 to 160 Amp are either base plate or door mounted by snap-on or screw fitting. Front operated 3-, 4-, 6-, 8-pole and change over types are available as standard. From 200 up to 3150 Amp the switch-disconnectors, also called load break switches, are designed as pole modules and they are available as 1- to 4-pole versions, front or side operated.