ABB Control products

Product Details:

• model:SH200M Series MCBs
• N of poles :1Pole / Single Pole / SP
• C curve MCB (trips at 5-10 x Ir)
• Breaking Capacity: 10kA AC
• Operating Voltage: 230/400/415 V AC
• Offers both Overaload and Shortcircuit protection
• Conforms to IS/IEC 60898-1
• Typically used for commercial or industrial applications where there could be higher chances of short circuit currents

Additional Information:

• Item Code: 1SYA271011R0014
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:S203-C80
• Product ID:2CDS253001R0804
• Catalog Description:Miniature Circuit Breaker - S200 80-100A - 3P - C
• Long Description:S203-C80 MCB C-Char., 6kA, 80A, 3P

• Product Net Width:52.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.42 kg

• Standards:IEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles:3
• Tripping Characteristic:C
• Rated Current (In):80 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
  acc. to IEC 60947-2 400 V AC
• Power Loss:at Rated Operating Conditions per Pole 8.1 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 500 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Minimum 12 V AC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 6 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(400 V AC) 6 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(400 V AC) 6 kA
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group I, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:10000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 16 / 16 mm²
• Tightening Torque:3 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:AA1-110
• Product ID:1SAM201910R1002
• Catalog Description:AA1-110 Shunt Trip
• Long Description:AA1-110 Shunt Trip 110V

• Product Net Width:18 mm
• Product Net Height:90 mm
• Product Net Depth:75.5 mm
• Product Net Weight:0.1 kg

• Rated Control Supply Voltage (Us):110 V AC
  110 … 200 V AC
  110 … 200 V DC
• Rated Frequency (f):Auxiliary Circuit 50 Hz
  Auxiliary Circuit 60 Hz
  Auxiliary Circuit DC
• Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²
  Flexible 1/2x 0.75 ... 2.5 mm²
  Rigid 1/2x 1 ... 4 mm²
• Tightening Torque:Auxiliary Circuit 0.8 ... 1.2 N·m
• Wire Stripping Length:Auxiliary Circuit 10 mm
• Recommended Screw Driver:Pozidriv 2
• Standards:IEC/EN 60947-1
  IEC/EN 60947-4-1
  UL 60947-1
  UL 60947-4-1
• Product Name:Shunt Trip
• Suitable For:MS116
  MS132
• Suitable for Product Class:Manual Motor Starter

• Ambient Air Temperature:Operation -25 ... +60 °C
  Storage -50 ... +80 °C
• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Item Code: 1SAM201910R1002
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:UA1-110
• Product ID:1SAM201904R1004
• Catalog Description:UA1-110 Undervoltage Release
• Long Description:UA1-120 Undervoltage release 110V 110V 50Hz/120V 60Hz

• Product Net Width:18 mm
• Product Net Height:90 mm
• Product Net Depth:75.5 mm
• Product Net Weight:0.1 kg

• Rated Control Supply Voltage (Us):110 V AC
  50 Hz
  120 V AC
  60 Hz
• Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²
  Flexible 1/2x 0.75 ... 2.5 mm²
  Rigid 1/2x 1 ... 4 mm²
• Tightening Torque:Auxiliary Circuit 0.8 ... 1.2 N·m
• Wire Stripping Length:Auxiliary Circuit 10 mm
• Recommended Screw Driver:Pozidriv 2
• Standards:IEC/EN 60947-1
  IEC/EN 60947-4-1
  UL 60947-1
  UL 60947-4-1
• Product Name:Undervoltage Release
• Suitable For:MS116
  MS132
• Suitable for Product Class:Manual Motor Starter

• Ambient Air Temperature:Operation -25 ... +60 °C
  Storage -50 ... +80 °C
• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Item Code: 1SAM201904R1004
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:HK1-02
• Product ID:1SAM201902R1003
• Catalog Description:HK1-02 Auxiliary Contact
• Long Description:HK1-02 Aux.-contact

• Product Net Width:9 mm
• Product Net Height:90 mm
• Product Net Depth:78.5 mm
• Product Net Weight:0.035 kg

• Rated Operational Voltage:690 V AC
  600 V DC
  Main Circuit 690 V
• Rated Operational Current AC-15 (Ie):(240 V) 4 A
  (24 V) 6 A
  (380 / 400 V) 3 A
  (690 V) 1 A
• Rated Operational Current DC-13 (Ie):(125 V) 0.55 A
  (24 V) 2 A
  (250 V) 0.27 A
  (440 V) 0 A
  (600 V) 0 A
• Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 1.5 mm²
  Flexible with Insulated Ferrule 1/2x 0.75 ... 1.5 mm²
  Flexible 1/2x 0.75 ... 1.5 mm²
  Rigid 1/2x 1 ... 1.5 mm²
• Tightening Torque:Auxiliary Circuit 0.8 ... 1.2 N·m
• Wire Stripping Length:Auxiliary Circuit 8 mm
• Recommended Screw Driver:M3
  Pozidriv 2
• Number of Auxiliary Contacts NO:0
• Number of Auxiliary Contacts NC:2
• Standards:IEC/EN 60947-1
  IEC/EN 60947-4-1
  IEC/EN 60947-5-1
  UL 60947-1
  UL 60947-4-1
• Product Name:Auxiliary Contact
• Suitable For:MS116
  MS132
• Suitable for Product Class:Manual Motor Starter

• Ambient Air Temperature:Operation -20 ... +55 °C
  Storage -50 ... +80 °C
• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Item Code: 1SAM201902R1003
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:XT1N 160 TMD 100-1000 3p F F
• Catalog Description:XT1N 160 TMD 100-1000 3p F F
• Long Description:C.BREAKER TMAX XT1N 160 FIXED THREE-POLE WITH FRONT TERMINALS AND THERMOMAGNETIC RELEASE TMD R 100-1000 A

• Product Net Width:76.2 mm
• Product Net Height:130 mm
• Product Net Depth:70 mm
• Product Net Weight:1.1 kg

• Circuit Breaker Type to be Associated:Power distribution
• Electrical Durability:120 cycles per hour
  8000 cycle
• Mechanical Durability:Nr. Operations 240 cycles per hour
  Nr. Operations 25000 cycle
• Number of Poles:3
• Opening Time:CB with SOR 15 ms
  CB with UVR 15 ms
• Power Loss:at Rated Operating Conditions per Pole 7 W
• Product Main Type:SACE Tmax XT
• Product Name:Moulded Case Circuit Breaker
• Product Type:CB
• Rated Current (In):100 A
• Rated Frequency (f):50 / 60 Hz
• Rated Impulse Withstand Voltage (Uimp):8 kV
• Rated Insulation Voltage (Ui):800 V
• Rated Operational Voltage:690 V AC
  500 V DC
• Rated Service Short-Circuit Breaking Capacity (Ics):(220 V AC) 50 kA
  (220 V AC) 50 kA
  (380 V AC) 36 kA
  (415 V AC) 36 kA
  (440 V AC) 18 kA
  (500 V AC) 15 kA
  (690 V AC) 4,5 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(220 V AC) 65 kA
  (230 V AC) 65 kA
  (380 V AC) 36 kA
  (415 V AC) 36 kA
  (440 V AC) 36 kA
  (500 V AC) 30 kA
  (690 V AC) 6 kA
  (250 V DC) 2 Poles in Series 36 kA
  (500 V DC) 3 Poles in Series 36 kA
• Rated Uninterrupted Current (Iu):160 A
• Rated Voltage (Ur):690 V
• Release Type:TM
• Standards:IEC
• Sub-type:XT1
• Terminal Connection Type:Fixed Circuit-Breakers
  Front
• Version:F

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:T1B 160 TMD20-630 3p F FC Cu (1├ù70mm2)
• Catalog Description:T1B 160 TMD20-630 3p F FC Cu (1├ù70mm2)
• Long Description:C.BREAKER TMAX T1B 160 FIXED THREE-POLE WITH FRONT TERMINALS FOR CABLE Cu 70mm2 AND THERMOMAGNETIC RELEASE TMD R 20-630 A

• Product Net Width:76 mm
• Product Net Height:130 mm
• Product Net Depth:70 mm
• Product Net Weight:1 kg

• Current Rating:20 A
• Electrical Durability:8000 cycle
  120 cycles per hour
• IIT Publishing Status:Level 0 - Information enabled
• Mechanical Durability:25000 cycle
  240 cycles per hour
• Number of Poles:3
• Order Multiple:1 piece
• Power Loss:at Rated Operating Conditions per Pole 1,8 W
• Product Main Type:SACE Tmax T
• Product Name:Moulded Case Circuit Breaker
• Product Type:CB
• Rated Current (In):20 A
• Rated Impulse Withstand Voltage (Uimp):8 kV
• Rated Insulation Voltage (Ui):800 V
• Rated Operational Voltage:690 V AC
  500 V DC
• Rated Service Short-Circuit Breaking Capacity (Ics):(220 V AC) 25 kA
  (230 V AC) 25 kA
  (380 V AC) 16 kA
  (415 V AC) 16 kA
  (440 V AC) 10 kA
  (500 V AC) 8 kA
  (690 V AC) 3 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(220 V AC) 2.5 kA
  (230 V AC) 2.5 kA
  (380 V AC) 16 kA
  (415 V AC) 16 kA
  (440 V AC) 10 kA
  (500 V AC) 8 kA
  (690 V AC) 3 kA
  (250 V DC) 2 Poles in Series 16 kA
  (250 V DC) 3 Poles in Series 20 kA
  (500 V DC) 3 Poles in Series 16 kA
• Rated Uninterrupted Current (Iu):160 A
• Release Type:TM
• Standards:IEC 60947
• Sub-type:T1
• Suitable For:T1
• Suitable for Product Class:Moulded Case Circuit Breakers
• Terminal Connection Type:Fixed Circuit-Breakers
  Front for Copper Cables
• Test Voltage at Industrial Frequency for 1 Minute:3000 V
• Test Voltage Max (Utest):3000 V
• Version:F

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:T4S 250 PR221DS-LS/I In=160 3p F F
• Catalog Description:T4S 250 PR221DS-LS/I In=160 3p F F
• Long Description:C.BREAKER TMAX T4S 250 FIXED THREE-POLE WITH FRONT TERMINALS AND SOLID-STATE RELEASE IN AC PR221DS-LS/I R 160

• Product Net Width:105 mm
• Product Net Height:205 mm
• Product Net Depth:103.5 mm
• Product Net Weight:3.5 kg

• Electrical Durability:8000 cycle
  120 cycles per hour
• IIT Publishing Status:Level 0 - Information enabled
• Mechanical Durability:20000 cycle
  240 cycles per hour
• Number of Poles:3
• Power Loss:at Rated Operating Conditions per Pole 4,4 W
• Product Main Type:SACE Tmax T
• Product Name:Moulded Case Circuit Breaker
• Product Type:CB
• Rated Current (In):160 A
• Rated Impulse Withstand Voltage (Uimp):8 kV
• Rated Insulation Voltage (Ui):1000 V
• Rated Operational Voltage:690 V AC
  750 V DC
• Rated Service Short-Circuit Breaking Capacity (Ics):(220 V AC) 85 kA
  (230 V AC) 85 kA
  (380 V AC) 50 kA
  (400 V AC) 50 kA
  (415 V AC) 50 kA
  (440 V AC) 40 kA
  (500 V AC) 30 kA
  (690 V AC) 25 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(220 V AC) 8.5 kA
  (230 V AC) 8.5 kA
  (380 V AC) 50 kA
  (400 V AC) 50 kA
  (415 V AC) 50 kA
  (440 V AC) 40 kA
  (500 V AC) 36 kA
  (690 V AC) 25 kA
  (250 V DC) 2 Poles in Series 50 kA
  (500 V DC) 2 Poles in Series 36 kA
  (750 V DC) 3 Poles in Series 25 kA
• Rated Uninterrupted Current (Iu):250 A
• Release Type:EL
• Standards:IEC 60947
• Sub-type:T4
• Suitable For:T4
• Suitable for Product Class:Moulded Case Circuit Breakers
• Terminal Connection Type:Fixed Circuit-Breakers
  Front
• Test Voltage at Industrial Frequency for 1 Minute:3500 V
• Test Voltage Max (Utest):3500 V
• Version:F

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:AA1-24
• Product ID:1SAM201901R1001
• Catalog Description:AA1-24 Shunt Trip
• Long Description:AA1-24 Shunt Trip 20-24V

• Product Net Width:18 mm
• Product Net Height:90 mm
• Product Net Depth:75.5 mm
• Product Net Weight:0.1 kg

• Rated Control Supply Voltage (Us):20 … 24 V AC
  20 … 70 V AC
  20 … 70 V DC
• Rated Frequency (f):Auxiliary Circuit 50 Hz
  Auxiliary Circuit 60 Hz
  Auxiliary Circuit DC
• Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²
  Flexible 1/2x 0.75 ... 2.5 mm²
  Rigid 1/2x 1 ... 4 mm²
• Tightening Torque:Auxiliary Circuit 0.8 ... 1.2 N·m
• Wire Stripping Length:Auxiliary Circuit 10 mm
• Recommended Screw Driver:Pozidriv 2
• Standards:IEC/EN 60947-1
  IEC/EN 60947-4-1
  UL 60947-1
  UL 60947-4-1
• Product Name:Shunt Trip
• Suitable For:MS116
  MS132
• Suitable for Product Class:Manual Motor Starter

• Ambient Air Temperature:Operation -25 ... +60 °C
  Storage -50 ... +80 °C
• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Item Code: 1SAM201910R1001
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:T4H 250 PR222DS/P-LSIG In=250 3p F F
• Catalog Description:T4H 250 PR222DS/P-LSIG In=250 3p F F
• Long Description:C.BREAKER TMAX T4H 250 FIXED THREE-POLE WITH FRONT TERMINALS AND SOLID-STATE RELEASE IN AC PR222DS/P-LSIG R 250

• Product Net Width:105 mm
• Product Net Height:205 mm
• Product Net Depth:103.5 mm
• Product Net Weight:3.5 kg

• Electrical Durability:8000 cycle
  120 cycles per hour
• IIT Publishing Status:Level 0 - Information enabled
• Mechanical Durability:20000 cycle
  240 cycles per hour
• Number of Poles:3
• Power Loss:at Rated Operating Conditions per Pole 10,7 W
• Product Main Type:SACE Tmax T
• Product Name:Moulded Case Circuit Breaker
• Product Type:CB
• Rated Current (In):250 A
• Rated Impulse Withstand Voltage (Uimp):8 kV
• Rated Insulation Voltage (Ui):1000 V
• Rated Operational Voltage:690 V AC
  750 V DC
• Rated Service Short-Circuit Breaking Capacity (Ics):(220 V AC) 150 kA
  (230 V AC) 150 kA
  (380 V AC) 70 kA
  (400 V AC) 70 kA
  (415 V AC) 70 kA
  (440 V AC) 65 kA
  (500 V AC) 50 kA
  (690 V AC) 40 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(220 V AC) 10 kA
  (230 V AC) 10 kA
  (380 V AC) 70 kA
  (400 V AC) 70 kA
  (415 V AC) 70 kA
  (440 V AC) 65 kA
  (500 V AC) 50 kA
  (690 V AC) 40 kA
  (250 V DC) 2 Poles in Series 70 kA
  (500 V DC) 2 Poles in Series 50 kA
  (750 V DC) 3 Poles in Series 36 kA
• Rated Uninterrupted Current (Iu):250 A
• Release Type:EL
• Standards:IEC 60947
• Sub-type:T4
• Suitable For:T4
• Suitable for Product Class:Moulded Case Circuit Breakers
• Terminal Connection Type:Fixed Circuit-Breakers
  Front
• Test Voltage Max (Utest):3500 V
• Version:F

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:MO132
• Catalog Description:MO132 Manual Motor Starter Magnetic Only
• Long Description:The MO132-25 manual motor starter mangnetic only is a compact 45 mm width devices with a rated operational current of Ie = 25.0 A. This device is used to manually switch on and off loads/motors and to protect them reliably and without the need for a fuse from short-circuits. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 25 kA at 400 VAC. A combination together with overload relays or motor controllers allows the protection of motors. Further features are the build-in disconnect function, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter mangnetic only is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks are available as accessory.

• Product Net Width:45 mm
• Product Net Height:97.8 mm
• Product Net Depth:86.55 mm
• Product Net Weight:0.31 kg

• Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 50 kA
  (400 V AC) 50 kA
  (440 V AC) 10 kA
  (500 V AC) 10 kA
  (690 V AC) 3 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 50 kA
  (400 V AC) 50 kA
  (440 V AC) 10 kA
  (500 V AC) 10 kA
  (690 V AC) 3 kA
• Rated Instantaneous Short-Circuit Current Setting (Ii):313 A
• Setting Range:None
• Rated Operational Power AC-3 (Pe):(400 V) Three Phase 11 kW
• Rated Operational Voltage:Main Circuit 690 V AC
• Rated Operational Current (Ie):25 A
• Rated Operational Current AC-3 (Ie):25 A
• Rated Frequency (f):Main Circuit 50 Hz
  Main Circuit 60 Hz
• Rated Impulse Withstand Voltage (Uimp):Main Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Power Loss:at Rated Operating Conditions per Pole 2.2 W
• Number of Poles:3
• Conventional Free-air Thermal Current (Ith):Main Circuit 25 A
• Degree of Protection:Housing IP20
  Main Circuit Terminals IP10
• Pollution Degree:3
• Electrical Durability:50000 cycle
• Mechanical Durability:100000 cycle
• Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 0.75 ... 6 mm²
  Flexible with Insulated Ferrule 1/2x 0.75 ... 6 mm²
  Flexible 1/2x 1 ... 2.5 mm²
  Flexible 1/2x 2.5 ... 6 mm²
  Rigid 1/2x 1 ... 2.5 mm²
  Rigid 1/2x 2.5 ... 6 mm²
• Tightening Torque:Main Circuit 2 N·m
• Wire Stripping Length:Main Circuit 10 mm
• Recommended Screw Driver:Pozidriv 2
• Mounting Position:Position 1 to 6
• Actuator Type:Rotary Handle
• Contact Position Indication:ON / OFF / TRIP
• Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Standards:IEC/EN 60947-1
  IEC/EN 60947-2
  IEC/EN 60947-4-1
  UL 60947-1
  UL 60947-4-1
• Remarks:For overload protection of the motors, an appropriate thermal or electronic overload relays must be used

• Ambient Air Temperature:Around the Enclosure 0 ... +40 °C
  Operation -25 ... +60 °C
  Storage -50 ... +80 °C
• Ambient Air Temperature Compensation:No
• Maximum Operating Altitude Permissible:2000 m
• Resistance to Shock acc. to IEC 60068-2-27:11 ms Pulse 25g
• Resistance to Vibrations acc. to IEC 60068-2-6:5g / 3 ... 150 Hz
• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:UA1-230
• Product ID:1SAM201904R1005
• Catalog Description:UA1-230 Undervoltage Release
• Long Description:UA1-230 Undervoltage release 230 V 50 Hz / 240 V 60 Hz

• Product Net Width:18 mm
• Product Net Height:90 mm
• Product Net Depth:75.5 mm
• Product Net Weight:0.1 kg

• Rated Control Supply Voltage (Us):230 V AC
  50 Hz
  240 V AC
  50 Hz
• Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²
  Flexible 1/2x 0.75 ... 2.5 mm²
  Rigid 1/2x 1 ... 4 mm²
• Tightening Torque:Auxiliary Circuit 0.8 ... 1.2 N·m
• Wire Stripping Length:Auxiliary Circuit 10 mm
• Recommended Screw Driver:Pozidriv 2
• Standards:IEC/EN 60947-1
  IEC/EN 60947-4-1
  UL 60947-1
  UL 60947-4-1
• Product Name:Undervoltage Release
• Suitable For:MS116
  MS132
• Suitable for Product Class:Manual Motor Starter

• Ambient Air Temperature:Operation -25 ... +60 °C
  Storage -50 ... +80 °C
• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Item Code: 1SAM201904R1005
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:UA1-24
• Product ID:1SAM201904R1001
• Catalog Description:UA1-24 Undervoltage Release
• Long Description:UA1-24undervoltage release 24 V

• Product Net Width:18 mm
• Product Net Height:90 mm
• Product Net Depth:75.5 mm
• Product Net Weight:0.1 kg

• Rated Control Supply Voltage (Us):24 V AC
  50 Hz
• Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²
  Flexible 1/2x 0.75 ... 2.5 mm²
  Rigid 1/2x 1 ... 4 mm²
• Tightening Torque:Auxiliary Circuit 0.8 ... 1.2 N·m
• Wire Stripping Length:Auxiliary Circuit 10 mm
• Recommended Screw Driver:Pozidriv 2
• Standards:IEC/EN 60947-1
  IEC/EN 60947-4-1
  UL 60947-1
  UL 60947-4-1
• Product Name:Undervoltage Release
• Suitable For:MS116
  MS132
• Suitable for Product Class:Manual Motor Starter

• Ambient Air Temperature:Operation -25 ... +60 °C
  Storage -50 ... +80 °C
• RoHS Status:
• Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Item Code: 1SAM201904R1001
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:UA1-415
• Product ID:1SAM201904R1007
• Catalog Description:UA1-415 Undervoltage Release
• Long Description:UA1-415 Undervoltage release 415V 415V 50Hz/480V 60Hz

• Product Net Width:18 mm
• Product Net Height:90 mm
• Product Net Depth:75.5 mm
• Product Net Weight:0.1 kg

• Rated Control Supply Voltage (Us):415 V AC
  50 Hz
  480 V AC
  60 Hz
• Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²
  Flexible 1/2x 0.75 ... 2.5 mm²
  Rigid 1/2x 1 ... 4 mm²
• Tightening Torque:Auxiliary Circuit 0.8 ... 1.2 N·m
• Wire Stripping Length:Auxiliary Circuit 10 mm
• Recommended Screw Driver:Pozidriv 2
• Standards:IEC/EN 60947-1
  IEC/EN 60947-4-1
  UL 60947-1
  UL 60947-4-1
• Product Name:Undervoltage Release
• Suitable For:MS116
  MS132
• Suitable for Product Class:Manual Motor Starter

• Ambient Air Temperature:Operation -25 ... +60 °C
  Storage -50 ... +80 °C
• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Item Code: 1SAM201904R1007
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:MSHD-LY,LTB,LTY
• Product ID:1SAM201920R1002
• Catalog Description:MSHD-LY Handles
• Long Description:MSHD-LY Handle, IP64, red/yellow, 3 times lockable, defeatable, 0-I Suitable for Manual Motor Starter

• Product Net Width:65.6 mm
• Product Net Height:65.5 mm
• Product Net Depth:57.9 mm
• Product Net Weight:0.065 kg

• Contact Position Indication:ON / OFF
• Actuator Type:Rotary Handle
• Shaft Diameter:6x6 mm
• Color:Yellow / Red
• Degree of Protection:IP64
• Tightening Torque:0.12 N·m
• Product Name:Handles
• Suitable For:MS116
  MS132
  MO132
  MS450
  MS451
  MS495
  MS496
  MS497
  MO450
  MO495
  MO496
• Suitable for Product Class:Manual Motor Starter

• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Item Code: 1SAM201920R1002
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:AA1-400
• Product ID:1SAM201910R1004
• Catalog Description:AA1-400 Shunt Trip
• Long Description:AA1-400 Shunt Trip 350-415V

• Product Net Width:18 mm
• Product Net Height:90 mm
• Product Net Depth:75.5 mm
• Product Net Weight:0.1 kg

• Rated Control Supply Voltage (Us):350 … 415 V AC
  350 … 500 V AC
  350 … 500 V DC
• Rated Frequency (f):Auxiliary Circuit 50 Hz
  Auxiliary Circuit 60 Hz
  Auxiliary Circuit DC
• Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²
  Flexible 1/2x 0.75 ... 2.5 mm²
  Rigid 1/2x 1 ... 4 mm²
• Tightening Torque:Auxiliary Circuit 0.8 ... 1.2 N·m
• Wire Stripping Length:Auxiliary Circuit 10 mm
• Recommended Screw Driver:Pozidriv 2
• Standards:IEC/EN 60947-1
  IEC/EN 60947-4-1
  UL 60947-1
  UL 60947-4-1
• Product Name:Shunt Trip
• Suitable For:MS116
  MS132
• Suitable for Product Class:Manual Motor Starter

• Ambient Air Temperature:Operation -25 ... +60 °C
  Storage -50 ... +80 °C
• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Item Code: 1SAM201910R1004
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:XT1B 160 TMD 160-1600 4p F F InN=100%
• Catalog Description:XT1B 160 TMD 160-1600 4p F F InN=100%
• Long Description:C.BREAKER TMAX XT1B 160 FIXED FOUR-POLE WITH FRONT TERMINALS AND THERMOMAGNETIC RELEASE TMD R 160-1600 A FULLY RATED NEUTRAL

• Product Net Width:101.6 mm
• Product Net Height:130 mm
• Product Net Depth:70 mm
• Product Net Weight:1.4 kg

• Circuit Breaker Type to be Associated:Power distribution
• Electrical Durability:120 cycles per hour
  8000 cycle
• Mechanical Durability:Nr. Operations 240 cycles per hour
  Nr. Operations 25000 cycle
• Number of Poles:4
• Opening Time:CB with SOR 15 ms
  CB with UVR 15 ms
• Power Loss:at Rated Operating Conditions per Pole 15 W
• Product Main Type:SACE Tmax XT
• Product Name:Moulded Case Circuit Breaker
• Product Type:CB
• Rated Current (In):160 A
• Rated Frequency (f):50 / 60 Hz
• Rated Impulse Withstand Voltage (Uimp):8 kV
• Rated Insulation Voltage (Ui):800 V
• Rated Operational Voltage:690 V AC
  500 V DC
• Rated Service Short-Circuit Breaking Capacity (Ics):(220 V AC) 25 kA
  (220 V AC) 25 kA
  (380 V AC) 18 kA
  (415 V AC) 18 kA
  (440 V AC) 11,25 kA
  (500 V AC) 8 kA
  (690 V AC) 3 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(220 V AC) 25 kA
  (230 V AC) 25 kA
  (380 V AC) 18 kA
  (415 V AC) 18 kA
  (440 V AC) 15 kA
  (500 V AC) 8 kA
  (690 V AC) 3 kA
  (250 V DC) 2 Poles in Series 18 kA
  (500 V DC) 3 Poles in Series 18 kA
• Rated Uninterrupted Current (Iu):160 A
• Rated Voltage (Ur):690 V
• Release Type:TM
• Standards:IEC
• Sub-type:XT1
• Terminal Connection Type:Fixed Circuit-Breakers
  Front
• Version:F

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:XT1C 160 TMD 160-1600 4p F F InN=50%
• Catalog Description:XT1C 160 TMD 160-1600 4p F F InN=50%
• Long Description:C.BREAKER TMAX XT1C 160 FIXED FOUR-POLE WITH FRONT TERMINALS AND THERMOMAGNETIC RELEASE TMD R 160-1600 A NEUTRAL = 50% PHASES

• Product Net Width:101.6 mm
• Product Net Height:130 mm
• Product Net Depth:70 mm
• Product Net Weight:1.4 kg

• Circuit Breaker Type to be Associated:Power distribution
• Electrical Durability:120 cycles per hour
  8000 cycle
• Mechanical Durability:Nr. Operations 240 cycles per hour
  Nr. Operations 25000 cycle
• Number of Poles:4
• Opening Time:CB with SOR 15 ms
  CB with UVR 15 ms
• Power Loss:at Rated Operating Conditions per Pole 15 W
• Product Main Type:SACE Tmax XT
• Product Name:Moulded Case Circuit Breaker
• Product Type:CB
• Rated Current (In):160 A
• Rated Frequency (f):50 / 60 Hz
• Rated Impulse Withstand Voltage (Uimp):8 kV
• Rated Insulation Voltage (Ui):800 V
• Rated Operational Voltage:690 V AC
  500 V DC
• Rated Service Short-Circuit Breaking Capacity (Ics):(220 V AC) 40 kA
  (220 V AC) 40 kA
  (380 V AC) 25 kA
  (415 V AC) 25 kA
  (440 V AC) 12,5 kA
  (500 V AC) 9 kA
  (690 V AC) 4 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(220 V AC) 40 kA
  (230 V AC) 40 kA
  (380 V AC) 25 kA
  (415 V AC) 25 kA
  (440 V AC) 25 kA
  (500 V AC) 18 kA
  (690 V AC) 4 kA
  (250 V DC) 2 Poles in Series 25 kA
  (500 V DC) 3 Poles in Series 25 kA
• Rated Uninterrupted Current (Iu):160 A
• Rated Voltage (Ur):690 V
• Release Type:TM
• Standards:IEC
• Sub-type:XT1
• Terminal Connection Type:Fixed Circuit-Breakers
  Front
• Version:F

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:T1C 160 TMD32-630 3p F FC Cu (1├ù70mm2)
• Catalog Description:T1C 160 TMD32-630 3p F FC Cu (1├ù70mm2)
• Long Description:C.BREAKER TMAX T1C 160 FIXED THREE-POLE WITH FRONT TERMINALS FOR CABLE Cu 70mm2 AND THERMOMAGNETIC RELEASE TMD R 32-630 A

• Product Net Width:76 mm
• Product Net Height:130 mm
• Product Net Depth:70 mm
• Product Net Weight:1 kg

• Electrical Durability:8000 cycle
  120 cycles per hour
• IIT Publishing Status:Level 0 - Information enabled
• Mechanical Durability:25000 cycle
  240 cycles per hour
• Number of Poles:3
• Power Loss:at Rated Operating Conditions per Pole 2,1 W
• Product Main Type:SACE Tmax T
• Product Name:Moulded Case Circuit Breaker
• Product Type:CB
• Rated Current (In):32 A
• Rated Impulse Withstand Voltage (Uimp):8 kV
• Rated Insulation Voltage (Ui):800 V
• Rated Operational Voltage:690 V AC
  500 V DC
• Rated Service Short-Circuit Breaking Capacity (Ics):(220 V AC) 30 kA
  (230 V AC) 30 kA
  (380 V AC) 25 kA
  (415 V AC) 25 kA
  (440 V AC) 11,25 kA
  (500 V AC) 7,5 kA
  (690 V AC) 3 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(220 V AC) 4 kA
  (230 V AC) 4 kA
  (380 V AC) 25 kA
  (415 V AC) 25 kA
  (440 V AC) 15 kA
  (500 V AC) 10 kA
  (690 V AC) 4 kA
  (250 V DC) 2 Poles in Series 25 kA
  (250 V DC) 3 Poles in Series 30 kA
  (500 V DC) 3 Poles in Series 25 kA
• Rated Uninterrupted Current (Iu):160 A
• Release Type:TM
• Standards:IEC 60947
• Sub-type:T1
• Suitable For:T1
• Suitable for Product Class:Moulded Case Circuit Breakers
• Terminal Connection Type:Fixed Circuit-Breakers
  Front for Copper Cables
• Test Voltage at Industrial Frequency for 1 Minute:3000 V
• Test Voltage Max (Utest):3000 V
• Version:F

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:T1N 160 TMD40-500 3p F FC Cu (1├ù70mm2)
• Catalog Description:T1N 160 TMD40-500 3p F FC Cu (1├ù70mm2)
• Long Description:C.BREAKER TMAX T1N 160 FIXED THREE-POLE WITH FRONT TERMINALS FOR CABLE Cu 70mm2 AND THERMOMAGNETIC RELEASE TMD R 40-500 A

• Product Net Width:76 mm
• Product Net Height:130 mm
• Product Net Depth:70 mm
• Product Net Weight:1 kg

• Current Rating:40 A
• Electrical Durability:8000 cycle
  120 cycles per hour
• IIT Publishing Status:Level 0 - Information enabled
• Mechanical Durability:25000 cycle
  240 cycles per hour
• Number of Poles:3
• Order Multiple:1 piece
• Power Loss:at Rated Operating Conditions per Pole 2,6 W
• Product Main Type:SACE Tmax T
• Product Name:Moulded Case Circuit Breaker
• Product Type:CB
• Rated Current (In):40 A
• Rated Impulse Withstand Voltage (Uimp):8 kV
• Rated Insulation Voltage (Ui):800 V
• Rated Operational Voltage:690 V AC
  500 V DC
• Rated Service Short-Circuit Breaking Capacity (Ics):(220 V AC) 37,5 kA
  (230 V AC) 37,5 kA
  (380 V AC) 27 kA
  (400 V AC) 27 kA
  (415 V AC) 27 kA
  (440 V AC) 11 kA
  (500 V AC) 7,5 kA
  (690 V AC) 3 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(220 V AC) 5 kA
  (230 V AC) 5 kA
  (380 V AC) 36 kA
  (400 V AC) 36 kA
  (415 V AC) 36 kA
  (440 V AC) 22 kA
  (500 V AC) 15 kA
  (690 V AC) 6 kA
  (250 V DC) 2 Poles in Series 36 kA
  (250 V DC) 3 Poles in Series 40 kA
  (500 V DC) 3 Poles in Series 36 kA
• Rated Uninterrupted Current (Iu):160 A
• Release Type:TM
• Standards:IEC 60947
• Sub-type:T1
• Suitable For:T1
• Suitable for Product Class:Moulded Case Circuit Breakers
• Terminal Connection Type:Fixed Circuit-Breakers
  Front for Copper Cables
• Test Voltage at Industrial Frequency for 1 Minute:3000 V
• Test Voltage Max (Utest):3000 V
• Version:F

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:T4N 320 PR221DS-LS/I
• Catalog Description:T4N PR221DS-LS/I In=320 3p F F
• Long Description:C.BREAKER TMAX T4N 320 FIXED THREE-POLE WITH FRONT TERMINALS AND SOLID-STATE RELEASE IN AC PR221DS-LS/I R 320

• Product Net Width:105 mm
• Product Net Height:205 mm
• Product Net Depth:103.5 mm
• Product Net Weight:3.5 kg

• Electrical Durability:6000 cycle
  120 cycles per hour
• IIT Publishing Status:Level 0 - Information enabled
• Mechanical Durability:20000 cycle
  240 cycles per hour
• Number of Poles:3
• Power Loss:at Rated Operating Conditions per Pole 17,6 W
• Product Main Type:SACE Tmax T
• Product Name:Moulded Case Circuit Breaker
• Product Type:CB
• Rated Current (In):Main Circuit 320 A
• Rated Impulse Withstand Voltage (Uimp):8 kV
• Rated Insulation Voltage (Ui):1000 V
• Rated Operational Voltage:690 V AC
• Rated Service Short-Circuit Breaking Capacity (Ics):(220 V AC) 70 kA
  (230 V AC) 70 kA
  (380 V AC) 36 kA
  (400 V AC) 36 kA
  (415 V AC) 36 kA
  (440 V AC) 30 kA
  (500 V AC) 25 kA
  (690 V AC) 20 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(220 V AC) 7 kA
  (230 V AC) 7 kA
  (380 V AC) 36 kA
  (400 V AC) 36 kA
  (415 V AC) 36 kA
  (440 V AC) 30 kA
  (500 V AC) 25 kA
  (690 V AC) 20 kA
  (250 V DC) 2 Poles in Series 36 kA
  (250 V DC) 3 Poles in Series 25 kA
  (500 V DC) 3 Poles in Series 16 kA
• Rated Uninterrupted Current (Iu):320 A
• Release Type:EL
• Standards:IEC 60947
• Sub-type:T4
• Suitable For:T4
• Suitable for Product Class:Moulded Case Circuit Breakers
• Terminal Connection Type:Fixed Circuit-Breakers
  Front
• Test Voltage at Industrial Frequency for 1 Minute:3500 V
• Test Voltage Max (Utest):3500 V
• Version:F

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:T4S 250 PR222DS/P-LSIG In=250 4p F F
• Catalog Description:T4S 250 PR222DS/P-LSIG In=250 4p F F
• Long Description:C.BREAKER TMAX T4S 250 FIXED FOUR-POLE WITH FRONT TERMINALS AND SOLID-STATE RELEASE IN AC PR222DS/P-LSIG R 250

• Product Net Width:140 mm
• Product Net Height:205 mm
• Product Net Depth:103.5 mm
• Product Net Weight:3.05 kg

• Electrical Durability:8000 cycle
  120 cycles per hour
• IIT Publishing Status:Level 0 - Information enabled
• Mechanical Durability:20000 cycle
  240 cycles per hour
• Number of Poles:4
• Power Loss:at Rated Operating Conditions per Pole 10,7 W
• Product Main Type:SACE Tmax T
• Product Name:Moulded Case Circuit Breaker
• Product Type:CB
• Rated Current (In):250 A
• Rated Impulse Withstand Voltage (Uimp):8 kV
• Rated Insulation Voltage (Ui):1000 V
• Rated Operational Voltage:690 V AC
  750 V DC
• Rated Service Short-Circuit Breaking Capacity (Ics):(220 V AC) 85 kA
  (230 V AC) 85 kA
  (380 V AC) 50 kA
  (400 V AC) 50 kA
  (415 V AC) 50 kA
  (440 V AC) 40 kA
  (500 V AC) 30 kA
  (690 V AC) 25 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(220 V AC) 8.5 kA
  (230 V AC) 8.5 kA
  (380 V AC) 50 kA
  (400 V AC) 50 kA
  (415 V AC) 50 kA
  (440 V AC) 40 kA
  (500 V AC) 36 kA
  (690 V AC) 25 kA
  (250 V DC) 2 Poles in Series 50 kA
  (500 V DC) 2 Poles in Series 36 kA
  (750 V DC) 3 Poles in Series 25 kA
• Rated Uninterrupted Current (Iu):250 A
• Release Type:EL
• Standards:IEC 60947
• Sub-type:T4
• Suitable For:T4
• Suitable for Product Class:Moulded Case Circuit Breakers
• Terminal Connection Type:Fixed Circuit-Breakers
  Front
• Test Voltage at Industrial Frequency for 1 Minute:3500 V
• Test Voltage Max (Utest):3500 V
• Version:F

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:MS116
• Product ID:1SAM250000R1008
• Catalog Description:MS116 Manual Motor Starter
• Long Description:The MS116 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 4.0 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

• Product Net Width:45 mm
• Product Net Height:90 mm
• Product Net Depth:85.6 mm
• Product Net Weight:0.265 kg

• Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 50 kA
  (400 V AC) 50 kA
  (440 V AC) 6 kA
  (500 V AC) 6 kA
  (690 V AC) 2 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 50 kA
  (400 V AC) 50 kA
  (440 V AC) 6 kA
  (500 V AC) 6 kA
  (690 V AC) 2 kA
• Rated Instantaneous Short-Circuit Current Setting (Ii):50 A
• Setting Range:2.5 ... 4 A
• Rated Operational Power AC-3 (Pe):(400 V) Three Phase 1.5 kW
• Rated Operational Voltage:Main Circuit 690 V AC
• Rated Operational Current (Ie):4 A
• Rated Operational Current AC-3 (Ie):4 A
• Rated Frequency (f):Main Circuit 50 Hz
  Main Circuit 60 Hz
• Rated Impulse Withstand Voltage (Uimp):Main Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Power Loss:at Rated Operating Conditions per Pole 0.7 ... 1.8 W
• Number of Poles:3
• Conventional Free-air Thermal Current (Ith):Main Circuit 4 A
• Degree of Protection:Housing IP20
  Main Circuit Terminals IP10
• Pollution Degree:3
• Electrical Durability:100000 cycle
• Mechanical Durability:100000 cycle
• Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 1/2x 0.75 ... 2.5 mm²
  Flexible 1/2x 0.75 ... 2.5 mm²
  Rigid 1/2x 1 ... 4 mm²
• Tightening Torque:Main Circuit 0.8 ... 1.2 N·m
• Wire Stripping Length:Main Circuit 9 mm
• Recommended Screw Driver:Pozidriv 2
• Mounting Position:Position 1 to 6
• Actuator Type:Rotary Handle
• Contact Position Indication:ON / OFF
• Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Standards:IEC/EN 60947-1
  IEC/EN 60947-2
  IEC/EN 60947-4-1
  UL 60947-1
  UL 60947-4-1

• Ambient Air Temperature:Around the Enclosure 0 ... +40 °C
  Operation -25 ... +70 °C
  Operation Compensated -25 ... +55 °C
  Storage -50 ... +80 °C
• Ambient Air Temperature Compensation:Yes
• Maximum Operating Altitude Permissible:2000 m
• Resistance to Shock acc. to IEC 60068-2-27:11 ms Pulse 25g
• Resistance to Vibrations acc. to IEC 60068-2-6:5g / 3 ... 150 Hz
• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Description

• Manufacturer: ABB
• Description:T3N 250 TMD250-2500 3p F F
• Categories:Circuit Breakers Electrical Power
• Service Breakers:T3

• Product Net Width:105 mm
• Product Net Height:150 mm
• Product Net Depth:70 mm
• Product Net Weight:1.6 kg

• RoHS Status:Planned to follow EU Directive 2002/95/EC August 18, 2005 and amendment after 2006-07-01

• Electrical Durability:8000 cycle,120 cycles per hour
• IIT Publishing Status:Level 0 - Information enabled
• Mechanical Durability:25000 cycle,240 cycles per hour
• Number of Poles:3
• Power Loss:at Rated Operating Conditions per Pole 17,8 W
• Product Main Type:SACE Tmax T
• Product Name:Automatic Circuit Breaker
• Product Type:CB
• Rated Current (In):250 A
• Rated Impulse Withstand Voltage (Uimp):8 kV
• Rated Insulation Voltage (Ui):800 V
• Rated Operational Voltage:690 V AC,500 V DC
• Rated Service Short-Circuit Breaking Capacity (Ics):(220 V AC) 37,5 kA
  (230 V AC) 37,5 kA
  (380 V AC) 27 kA
  (400 V AC) 27 kA
  (415 V AC) 27 kA
  (440 V AC) 18 kA
  (500 V AC) 15 kA
  (690 V AC) 3,75 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(220 V AC) 5 kA
  (230 V AC) 5 kA
  (380 V AC) 36 kA
  (400 V AC) 36 kA
  (415 V AC) 36 kA
  (440 V AC) 25 kA
  (500 V AC) 20 kA
  (690 V AC) 5 kA
  (250 V DC) 2 Poles in Series 36 kA
  (250 V DC) 3 Poles in Series 40 kA
  (500 V DC) 3 Poles in Series 36 kA
• Rated Uninterrupted Current (Iu):250 A
• Release Type:TM
• Standards:IEC 60947
• Sub-type:T3
• Terminal Connection Type:Fixed Circuit-BreakersFront
• Test Voltage at Industrial Frequency for 1 Minute:3000 V
• Test Voltage Max (Utest):3000 V
• Version:F

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:MS132-T
• Catalog Description:MS132-T Circuit Breaker for Primary Transformer Protection
• Long Description:The circuit breaker for transformer protection MS132-T is a compact 45 mm width device designed to protect control transformers on the primary side. This device has a rated operational current of Ie = 0.16 A. It allows fuse-less protection against overload and short-circuit. The short-circuit current setting is fixed to 20 times the rated operational current to handle the high inrush current generated by transformers. The device allows manually connect and disconnect the transformer from the mains thanks of its built-in disconnection function. The circuit breaker for transformer protection offers a rated service short-circuit breaking capacity of Ics = 100 kA at 400 VAC and a trip class 10. Further features are temperature compensation, trip-free mechanism, rotary handle with a clear switch position indication and short circuit trip indicator. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, power in-feed blocks are available as accessory.

• Product Net Width:45 mm
• Product Net Height:90 mm
• Product Net Depth:86.75 mm
• Product Net Weight:0.215 kg

• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(400 V AC) 100 kA
• Rated Instantaneous Short-Circuit Current Setting (Ii):3.2 A
• Setting Range:0.1 ... 0.16 A
• Rated Operational Voltage:Main Circuit 690 V AC
• Rated Operational Current (Ie):0.16 A
• Rated Frequency (f):Main Circuit 50 Hz
  Main Circuit 60 Hz
• Rated Impulse Withstand Voltage (Uimp):Main Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Power Loss:at Rated Operating Conditions per Pole 0.6 … 1.5 W
• Number of Poles:3
• Conventional Free-air Thermal Current (Ith):0.16 A
  Main Circuit 0.16 A
• Degree of Protection:Housing IP20
  Main Circuit Terminals IP10
• Pollution Degree:3
• Electrical Durability:50000 cycle
• Mechanical Durability:100000 cycle
• Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 1/2x 0.75 ... 2.5 mm²
  Flexible 1/2x 0.75 ... 2.5 mm²
  Rigid 1/2x 1 ... 4 mm²
• Tightening Torque:Main Circuit 0.8 ... 1.2 N·m
• Wire Stripping Length:Main Circuit 9 mm
• Recommended Screw Driver:Pozidriv 2
  M3.5
• Mounting Position:Position 1 to 6
• Actuator Type:Rotary Handle
• Contact Position Indication:ON / OFF / TRIP
• Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Standards:IEC/EN 60947-1
  IEC/EN 60947-2
  IEC/EN 60947-4-1

• Ambient Air Temperature:Around the Enclosure 0 ... +40 °C
  Operation -25 ... +70 °C
  Storage -50 ... +80 °C
• Ambient Air Temperature Compensation:Yes
• Maximum Operating Altitude Permissible:2000 m
• Resistance to Shock acc. to IEC 60068-2-27:11 ms Pulse 25g
• Resistance to Vibrations acc. to IEC 60068-2-6:5g / 3 ... 150 Hz
• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:S203M-C20
• Product ID:2CDS273001R0204
• Catalog Description:Miniature Circuit Breaker - S200M - 3P - C
• Long Description:System pro M compact S200M miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 10 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200M comply with IEC/EN 60898-1 and IEC/EN 609 47-2, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200M to save 50% space.

• Product Net Width:52.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.375 kg

• Standards:IEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles:3
• Tripping Characteristic:C
• Rated Current (In):20 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
  acc. to IEC 60947-2 440 V AC
• Power Loss:7.5 W
  at Rated Operating Conditions per Pole 2.5 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Minimum 12 V AC
  Minimum 12 V DC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 25 kA
  (440 V AC) 15 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 18.8 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Insulation group II, black, sealable
• Contact Position Indication:Red ON / Green OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 10 / 10 mm²
  Flexible with Ferrule 0.75 ... 25 mm²
  Flexible 0.75 ... 25 mm²
  Rigid 0.75 ... 35 mm²
  Stranded 0.75 ... 35 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
  TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Description

• Manufacturer: ABB
• Description:T3S 250 TMD250-2500 3p F F
• Categories:T3

• Product Net Width:105 mm
• Product Net Height:150 mm
• Product Net Depth:70 mm
• Product Net Weight:1.6 kgEnvironmental
  • RoHS Status:Planned to follow EU Directive 2002/95/EC August 18, 2005 and amendment after 2006-07-01
  Specification
  • Electrical Durability:8000 cycle
    120 cycles per hour
  • Mechanical Durability:25000 cycle
    240 cycles per hour
  • Number of Poles:3
  • Power Loss:at Rated Operating Conditions per Pole 17,8 W
  • Product Main Type:SACE Tmax T
  • Product Name:Automatic Circuit Breaker
  • Product Type:CB
  • Rated Current (In):250 A
  • Rated Impulse Withstand Voltage (Uimp):8 kV
  • Rated Insulation Voltage (Ui):800 V
  • Rated Operational Voltage:690 V AC
    500 V DC
  • Rated Service Short-Circuit Breaking Capacity (Ics):(220 V AC) 47,5 kA
    (230 V AC) 47,5 kA
    (380 V AC) 27 kA
    (400 V AC) 27 kA
    (415 V AC) 27 kA
    (440 V AC) 20 kA
    (500 V AC) 15 kA
    (690 V AC) 4 kA
  • Rated Ultimate Short-Circuit Breaking Capacity (Icu):(220 V AC) 8.5 kA
    (230 V AC) 8.5 kA
    (380 V AC) 50 kA
    (400 V AC) 50 kA
    (415 V AC) 50 kA
    (440 V AC) 40 kA
    (500 V AC) 30 kA
    (690 V AC) 8 kA
    (250 V DC) 2 Poles in Series 50 kA
    (250 V DC) 3 Poles in Series 55 kA
    (500 V DC) 3 Poles in Series 50 kA
  • Rated Uninterrupted Current (Iu):250 A
  • Release Type:TM
  • Standards:IEC 60947
  • Sub-type:T3
  • Terminal Connection Type:Fixed Circuit-Breakers Front
  • Test Voltage at Industrial Frequency for 1 Minute:3000 V
  • Test Voltage Max (Utest):3000 V
  • Version:F

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:AA1-230
• Product ID:1SAM201910R1003
• Catalog Description:AA1-230 Shunt Trip
• Long Description:AA1-230 Shunt Trip 200-240V

• Product Net Width:18 mm
• Product Net Height:90 mm
• Product Net Depth:75.5 mm
• Product Net Weight:0.1 kg

• Rated Control Supply Voltage (Us):200 … 240 V AC
  200 … 350 V AC
  200 … 350 V DC
• Rated Frequency (f):Auxiliary Circuit 50 Hz
  Auxiliary Circuit 60 Hz
  Auxiliary Circuit DC
• Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²
  Flexible 1/2x 0.75 ... 2.5 mm²
  Rigid 1/2x 1 ... 4 mm²
• Tightening Torque:Auxiliary Circuit 0.8 ... 1.2 N·m
• Wire Stripping Length:Auxiliary Circuit 10 mm
• Recommended Screw Driver:Pozidriv 2
• Standards:IEC/EN 60947-1
  IEC/EN 60947-4-1
  UL 60947-1
  UL 60947-4-1
• Product Name:Shunt Trip
• Suitable For:MS116
  MS132
• Suitable for Product Class:Manual Motor Starter

• Ambient Air Temperature:Operation -25 ... +60 °C
  Storage -50 ... +80 °C
• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Item Code: 1SAM201910R1003
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:CK1-11
• Catalog Description:CK1-11 Short Circuit Signaling Contact
• Long Description:CK1-11 Short-Circuit Signal Contact 2 NO

• Product Net Width:9 mm
• Product Net Height:90 mm
• Product Net Depth:78 mm
• Product Net Weight:0.035 kg

• Rated Operational Voltage:690 V AC
  600 V DC
  Main Circuit 690 V
• Rated Operational Current AC-15 (Ie):(240 V) 4 A
  (24 V) 6 A
  (380 / 400 V) 3 A
  (690 V) 1 A
• Rated Operational Current DC-13 (Ie):(125 V) 0.55 A
  (24 V) 2 A
  (250 V) 0.27 A
  (440 V) 0 A
  (600 V) 0 A
• Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 1.5 mm²
  Flexible with Insulated Ferrule 1/2x 0.75 ... 1.5 mm²
  Flexible 1/2x 0.75 ... 1.5 mm²
  Rigid 1/2x 1 ... 1.5 mm²
• Tightening Torque:Auxiliary Circuit 0.8 ... 1.2 N·m
• Wire Stripping Length:Auxiliary Circuit 8 mm
• Recommended Screw Driver:M3
  Pozidriv 2
• Number of Auxiliary Contacts NO:1
• Number of Auxiliary Contacts NC:1
• Standards:IEC/EN 60947-1
  IEC/EN 60947-2
  IEC/EN 60947-4-1
  IEC/EN 60947-5-1
  UL 508
  CSA 22.2 No. 14
• Product Name:Short Circuit Signaling Contact
• Suitable For:MS132
• Suitable for Product Class:Manual Motor Starter

• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Item Code: 1SAM301901R1001
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:HKF1-20
• Product ID:1SAM201901R1002
• Catalog Description:HKF1-20 Auxiliary Contact
• Long Description:HKF1-20 Aux.-contact 2 NO, front mounting

• Product Net Width:45 mm
• Product Net Height:12.5 mm
• Product Net Depth:26.5 mm
• Product Net Weight:0.015 kg

• Rated Operational Voltage:250 V
• Rated Operational Current AC-15 (Ie):(240 V) 4 A
  (24 V) 6 A
  (380 / 400 V) 3 A
  (690 V) 1 A
• Rated Operational Current DC-13 (Ie):(125 V) 0.55 A
  (24 V) 2 A
  (250 V) 0.27 A
  (440 V) 0 A
  (600 V) 0 A
• Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV
• Rated Insulation Voltage (Ui):250 V
• Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 1.5 mm²
  Flexible with Insulated Ferrule 1/2x 0.75 ... 1.5 mm²
  Flexible 1/2x 0.75 ... 1.5 mm²
  Rigid 1/2x 1.0 ... 2.5 mm²
• Tightening Torque:Auxiliary Circuit 0.8 ... 1.2 N·m
• Wire Stripping Length:Auxiliary Circuit 8 mm
• Recommended Screw Driver:M3
  Pozidriv 2
• Number of Auxiliary Contacts NO:2
• Number of Auxiliary Contacts NC:0
• Standards:IEC/EN 60947-1
  IEC/EN 60947-4-1
  IEC/EN 60947-5-1
  UL 60947-1
  UL 60947-4-1
• Product Name:Auxiliary Contact
• Suitable For:MS116
  MS132
  MO132
• Suitable for Product Class:Manual Motor Starter

• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Item Code: 1SAM201901R1002
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:MS132
• Catalog Description:MS132-20 Manual Motor Starter
• Long Description:The MS132-20 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 20.0 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 100 kA at 400 VAC and the trip class 10. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks are available as accessory.

• Product Net Width:45 mm
• Product Net Height:97.8 mm
• Product Net Depth:86.55 mm
• Product Net Weight:0.31 kg

• Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 100 kA
  (250 V DC) 3 Poles in Series 10 kA
  (400 V AC) 100 kA
  (440 V AC) 20 kA
  (500 V AC) 20 kA
  (690 V AC) 3 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 100 kA
  (400 V AC) 100 kA
  (440 V AC) 20 kA
  (500 V AC) 20 kA
  (690 V AC) 3 kA
• Rated Instantaneous Short-Circuit Current Setting (Ii):300 A
• Setting Range:16 ... 20 A
• Rated Operational Power AC-3 (Pe):(400 V) Three Phase 7.5 kW
• Rated Operational Voltage:Main Circuit 690 V AC
  Main Circuit 250 V DC
• Rated Operational Current (Ie):20 A
• Rated Operational Current AC-3 (Ie):20 A
• Rated Operational Current DC-5 (Ie):20 A
• Rated Frequency (f):Main Circuit 50 Hz
  Main Circuit 60 Hz
• Rated Impulse Withstand Voltage (Uimp):Main Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Power Loss:at Rated Operating Conditions per Pole 1.5 ... 2.3 W
• Number of Poles:3
• Conventional Free-air Thermal Current (Ith):Main Circuit 20 A
• Degree of Protection:Housing IP20
  Main Circuit Terminals IP10
• Pollution Degree:3
• Electrical Durability:50000 cycle
• Mechanical Durability:100000 cycle
• Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 0.75 ... 6 mm²
  Flexible with Insulated Ferrule 1/2x 0.75 ... 6 mm²
  Flexible 1/2x 1 ... 2.5 mm²
  Flexible 1/2x 2.5 ... 6 mm²
  Rigid 1/2x 1 ... 2.5 mm²
  Rigid 1/2x 2.5 ... 6 mm²
• Tightening Torque:Main Circuit 2 N·m
• Wire Stripping Length:Main Circuit 10 mm
• Recommended Screw Driver:Pozidriv 2
• Mounting Position:Position 1 to 6
• Actuator Type:Rotary Handle
• Contact Position Indication:ON / OFF / TRIP
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
  TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Standards:IEC/EN 60947-1
  IEC/EN 60947-2
  IEC/EN 60947-4-1
  UL 60947-1
  UL 60947-4-1

• Ambient Air Temperature:Around the Enclosure 0 ... +40 °C
  Operation -25 ... +70 °C
  Operation Compensated -25 ... +60 °C
  Storage -50 ... +80 °C
• Ambient Air Temperature Compensation:Yes
• Maximum Operating Altitude Permissible:2000 m
• Resistance to Shock acc. to IEC 60068-2-27:11 ms Pulse 25g
• Resistance to Vibrations acc. to IEC 60068-2-6:5g / 3 ... 150 Hz
• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:MS165
• Catalog Description:MS165 Manual Motor Starter
• Long Description:MS165 is a compact and powerful range for motor protection up to 30 kW (400 V) / 60 A in width of 55 mm. They offer a reliable protection for motors in the event of overload or phase failure. The devices have trip class 10. This type has also a clear and reliable indication of fault in a separate window in the event of short-circuit tripping. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, power in-feed blocks are available as accessory. These are suitable throughout the MS116/MS132/MS165 range.

• Product Net Width:55 mm
• Product Net Height:142.65 mm
• Product Net Depth:122.1 mm
• Product Net Weight:0.95 kg

• Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 100 kA
  (250 V DC) 3 Poles in Series 100 kA
  (400 V AC) 100 kA
  (440 V AC) 75 kA
  (500 V AC) 20 kA
  (690 V AC) 8 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 100 kA
  (250 V DC) 100 kA
  (400 V AC) 100 kA
  (440 V AC) 75 kA
  (500 V AC) 20 kA
  (690 V AC) 8 kA
• Rated Instantaneous Short-Circuit Current Setting (Ii):240 A
• Setting Range:10 ... 16 A
• Rated Operational Power AC-3 (Pe):(400 V) Three Phase 7.5 kW
• Rated Operational Voltage:Main Circuit 690 V AC
  Main Circuit 250 V DC
• Rated Operational Current (Ie):16 A
• Rated Operational Current AC-3 (Ie):16 A
• Rated Operational Current DC-5 (Ie):16 A
• Rated Frequency (f):Main Circuit 50 Hz
  Main Circuit 60 Hz
• Rated Impulse Withstand Voltage (Uimp):Main Circuit 8 kV
• Rated Insulation Voltage (Ui):1000 V
• Power Loss:1.49 … 3.81 W
• Number of Poles:3
• Conventional Free-air Thermal Current (Ith):Main Circuit 16 A
• Degree of Protection:Housing IP20
  Main Circuit Terminals IP10
• Pollution Degree:3
• Electrical Durability:25000 cycle
• Mechanical Durability:50000 cycle
• Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 1 ... 35 mm²
  Flexible with Insulated Ferrule 1/2x 1 ... 35 mm²
  Flexible 1/2x 1 ... 35 mm²
  Rigid 1/2x 1 … 50 mm²
  Solid 1/2x 1 … 50 mm²
• Tightening Torque:Auxiliary Circuit 0.6 ... 0.8 N·m
  Control Circuit 4 N·m
  Main Circuit 4 N·m
• Wire Stripping Length:Main Circuit 16 mm
• Recommended Screw Driver:Pozidriv 2
• Mounting Position:Position 1 to 6
• Actuator Type:Rotary Handle
• Contact Position Indication:ON / OFF / TRIP
• Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Standards:IEC/EN 60947-1
  IEC/EN 60947-2
  IEC/EN 60947-4-1
  UL 60947-4-1
  CSA 22.2 No. 14

• Ambient Air Temperature:Operation -25 ... +60 °C
  Operation Compensated -25 ... +60 °C
  Storage -50 ... +80 °C
• Ambient Air Temperature Compensation:Yes
• Maximum Operating Altitude Permissible:2000 m
• Resistance to Shock acc. to IEC 60068-2-27:11 ms Pulse 25g
• Resistance to Vibrations acc. to IEC 60068-2-6:5g / 3 ... 150 Hz
• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SK1-11
• Catalog Description:SK1-11 Signal Contact
• Long Description:SK1-11 Signal contact

• Product Net Width:9 mm
• Product Net Height:90 mm
• Product Net Depth:78.5 mm
• Product Net Weight:0.035 kg

• Rated Operational Voltage:690 V AC
  600 V DC
  Main Circuit 690 V
• Rated Operational Current AC-15 (Ie):(240 V) 4 A
  (24 V) 6 A
  (380 / 400 V) 3 A
  (690 V) 1 A
• Rated Operational Current DC-13 (Ie):(125 V) 0.55 A
  (24 V) 2 A
  (250 V) 0.27 A
  (440 V) 0 A
  (600 V) 0 A
• Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 1.5 mm²
  Flexible with Insulated Ferrule 1/2x 0.75 ... 1.5 mm²
  Flexible 1/2x 0.75 ... 1.5 mm²
  Rigid 1/2x 1 ... 1.5 mm²
• Tightening Torque:Auxiliary Circuit 0.8 ... 1.2 N·m
• Wire Stripping Length:Auxiliary Circuit 8 mm
• Recommended Screw Driver:M3
  Pozidriv 2
• Number of Auxiliary Contacts NO:1
• Number of Auxiliary Contacts NC:1
• Standards:IEC/EN 60947-1
  IEC/EN 60947-4-1
  IEC/EN 60947-5-1
  UL 60947-1
  UL 60947-4-1
• Product Name:Signal Contact
• Suitable For:MS116
  MS132
• Suitable for Product Class:Manual Motor Starter

• Ambient Air Temperature:Operation -20 ... +55 °C
  Storage -50 ... +80 °C
• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Item Code: 1SAM201903R1001
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:MO165
• Catalog Description:MO165 Manual Motor Starter Magnetic Only
• Long Description:MO165 Manual motor starter Magnetic only 16 A

• Product Net Width:55 mm
• Product Net Height:142.65 mm
• Product Net Depth:122.1 mm
• Product Net Weight:0.95 kg

• Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 100 kA
  (250 V DC) 3 Poles in Series 100 kA
  (400 V AC) 100 kA
  (440 V AC) 75 kA
  (500 V AC) 20 kA
  (690 V AC) 8 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 100 kA
  (250 V DC) 100 kA
  (400 V AC) 100 kA
  (440 V AC) 75 kA
  (500 V AC) 20 kA
  (690 V AC) 8 kA
• Rated Instantaneous Short-Circuit Current Setting (Ii):240 A
• Setting Range:None
• Rated Operational Power AC-3 (Pe):(400 V) Three Phase 7.5 kW
• Rated Operational Voltage:Main Circuit 690 V AC
  Main Circuit 250 V DC
• Rated Operational Current (Ie):16 A
• Rated Operational Current AC-3 (Ie):16 A
• Rated Operational Current DC-5 (Ie):16 A
• Rated Frequency (f):Main Circuit 50 Hz
  Main Circuit 60 Hz
• Rated Impulse Withstand Voltage (Uimp):Main Circuit 8 kV
• Rated Insulation Voltage (Ui):1000 V
• Power Loss:3.81 W
• Number of Poles:3
• Conventional Free-air Thermal Current (Ith):Main Circuit 16 A
• Degree of Protection:Housing IP20
  Main Circuit Terminals IP10
• Pollution Degree:3
• Electrical Durability:25000 cycle
• Mechanical Durability:50000 cycle
• Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 1 ... 35 mm²
  Flexible with Insulated Ferrule 1/2x 1 ... 35 mm²
  Flexible 1/2x 1 ... 35 mm²
  Rigid 1/2x 1 … 50 mm²
  Solid 1/2x 1 … 50 mm²
• Tightening Torque:Control Circuit 4 N·m
  Main Circuit 4 N·m
• Wire Stripping Length:Main Circuit 16 mm
• Recommended Screw Driver:Pozidriv 2
• Mounting Position:Position 1 to 6
• Actuator Type:Rotary Handle
• Contact Position Indication:ON / OFF / TRIP
• Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Standards:IEC/EN 60947-1
  IEC/EN 60947-2
  IEC/EN 60947-4-1
  UL 60947-4-1
  CSA 22.2 No. 14
• Remarks:For overload protection of the motors, an appropriate thermal or electronic overload relays must be used

• Ambient Air Temperature:Operation -25 ... +60 °C
  Operation Compensated -25 ... +60 °C
  Storage -50 ... +80 °C
• Ambient Air Temperature Compensation:No
• Maximum Operating Altitude Permissible:2000 m
• Resistance to Shock acc. to IEC 60068-2-27:11 ms Pulse 25g
• Resistance to Vibrations acc. to IEC 60068-2-6:5g / 3 ... 150 Hz
• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:MSHD-LB
• Catalog Description:MSHD-LB Handles
• Long Description:MSHD-LB Handle, IP64, black, 3 times lockable, defeatable, 0-I Suitable for Manual Motor Starter

• Product Net Width:65.6 mm
• Product Net Height:65.5 mm
• Product Net Depth:57.9 mm
• Product Net Weight:0.065 kg

• Contact Position Indication:ON / OFF
• Actuator Type:Rotary Handle
• Shaft Diameter:6x6 mm
• Color:Black
• Degree of Protection:IP64
• Tightening Torque:0.12 N·m
• Product Name:Handles
• Suitable For:MS116
  MS132
  MO132
  MS450
  MS451
  MS495
  MS496
  MS497
  MO450
  MO495
  MO496
• Suitable for Product Class:Manual Motor Starter

• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendmen

Additional Information:

• Item Code: 1SAM201920R1001
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:HK1-11
• Catalog Description:HK1-11 Auxiliary Contact
• Long Description:HK1-11 Aux.-contact

• Product Net Width:9 mm
• Product Net Height:90 mm
• Product Net Depth:78.5 mm
• Product Net Weight:0.035 kg

• Rated Operational Voltage:690 V AC
• 600 V DC
  Main Circuit 690 V
• Rated Operational Current AC-15 (Ie):(240 V) 4 A
  (24 V) 6 A
  (380 / 400 V) 3 A
  (690 V) 1 A
• Rated Operational Current DC-13 (Ie):(125 V) 0.55 A
  (24 V) 2 A
  (250 V) 0.27 A
  (440 V) 0 A
  (600 V) 0 A
• Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV
• Rated Insulation Voltage (Ui):690 V
• Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 1.5 mm²
  Flexible with Insulated Ferrule 1/2x 0.75 ... 1.5 mm²
  Flexible 1/2x 0.75 ... 1.5 mm²
  Rigid 1/2x 1 ... 1.5 mm²
• Tightening Torque:Auxiliary Circuit 0.8 ... 1.2 N·m
• Wire Stripping Length:Auxiliary Circuit 8 mm
• Recommended Screw Driver:M3
  Pozidriv 2
• Number of Auxiliary Contacts NO:1
• Number of Auxiliary Contacts NC:1
• Standards:IEC/EN 60947-1
  IEC/EN 60947-4-1
  IEC/EN 60947-5-1
  UL 60947-1
  UL 60947-4-1
• Product Name:Auxiliary Contact
• Suitable For:MS116
  MS132
• Suitable for Product Class:Manual Motor Starter

• Ambient Air Temperature:Operation -20 ... +55 °C
  Storage -50 ... +80 °C
• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Item Code: 1SAM201902R1001
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:HKF1-11
• Catalog Description:HKF1-11 Auxiliary Contact
• Long Description:HKF1-11 Aux.-contact for frontmounting

• Product Net Width:45 mm
• Product Net Height:12.5 mm
• Product Net Depth:26.5 mm
• Product Net Weight:0.015 kg

• Rated Operational Voltage:250 V
• Rated Operational Current AC-15 (Ie):(240 V) 4 A
  (24 V) 6 A
  (380 / 400 V) 3 A
  (690 V) 1 A
• Rated Operational Current DC-13 (Ie):(125 V) 0.55 A
  (24 V) 2 A
  (250 V) 0.27 A
  (440 V) 0 A
  (600 V) 0 A
• Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV
• Rated Insulation Voltage (Ui):250 V
• Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 1.5 mm²
  Flexible with Insulated Ferrule 1/2x 0.75 ... 1.5 mm²
  Flexible 1/2x 0.75 ... 1.5 mm²
  Rigid 1/2x 1.0 ... 2.5 mm²
• Tightening Torque:Auxiliary Circuit 0.8 ... 1.2 N·m
• Wire Stripping Length:Auxiliary Circuit 8 mm
• Recommended Screw Driver:M3
  Pozidriv 2
• Number of Auxiliary Contacts NO:1
• Number of Auxiliary Contacts NC:1
• Standards:IEC/EN 60947-1
  IEC/EN 60947-4-1
  IEC/EN 60947-5-1
  UL 60947-1
  UL 60947-4-1
• Product Name:Auxiliary Contact
• Suitable For:MS116
  MS132
  MO132
• Suitable for Product Class:Manual Motor Starter

• Ambient Air Temperature:Operation -20 ... +55 °C
  Storage -50 ... +80 °C
• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Item Code: 1SAM201901R1001
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:MSMN
• Catalog Description:MSMN Driver
• Long Description:MSMN Driver w. screw for manual motor staters, 6x6

• Product Net Width:10 mm
• Product Net Height:12.5 mm
• Product Net Depth:31.2 mm
• Product Net Weight:1.7 g

• Shaft Diameter:6x6 mm
• Tightening Torque:0.12 N·m
• Product Name:Driver
• Suitable For:MS116
  MS132
  MS325
  MO325
• Suitable for Product Class:Manual Motor Starter

• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Item Code: 1SAM101923R0002
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:MSAH1
• Catalog Description:MSAH1 Shaft Supporter
• Long Description:MSAH1 Shaft Supporter suitable for MS116, MS132/MO132

• Product Net Width:57 mm
• Product Net Height:90 mm
• Product Net Depth:145 mm
• Product Net Weight:0.035 kg

• Shaft Diameter:6x6 mm
• Product Name:Shaft Supporter
• Suitable For:MS116
  MS132
  MO132
• Suitable for Product Class:Manual Motor Starter

• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:MSMNO
• Product ID:1SAM101923R0012
• Catalog Description:MSMNO Driver
• Long Description:MSMNO Driver w/o coding w. screw for manual motor staters, 6x6

• Product Net Width:10 mm
• Product Net Height:12.5 mm
• Product Net Depth:31.2 mm
• Product Net Weight:1.7 g

• Shaft Diameter:6x6 mm
• Shaft Length:32 mm
• Tightening Torque:0.12 N·m
• Product Name:Driver
• Suitable For:MS116
  MS132
  MS325
  MO325
• Suitable for Product Class:Manual Motor Starter

• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Item Code: 1SAM101923R0012
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:OXS6X130
• Product ID:1SCA101655R1001
• Catalog Description:OXS6X130 Shaft
• Long Description:OXS6X130 SHAFT for selector handle

• Product Net Width:6 mm
• Product Net Height:6 mm
• Product Net Depth:130 mm
• Product Net Weight:0.04 kg

• Shaft Diameter:6 mm
• Shaft Length:130 mm

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)