Switch Disconnector

Product Details:

• Extended Product Type:S202-C80
• Product ID:2CDS252001R0804
• Catalog Description:Miniature Circuit Breaker - S200 80-100A - 2P - C
• Long Description:S202-C80 MCB C-Char., 6kA, 80A, 2P

• Product Net Width:35 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.28 kg

• Standards:IEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles:2
• Tripping Characteristic:C
• Rated Current (In):80 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
  acc. to IEC 60947-2 400 V AC
• Power Loss:at Rated Operating Conditions per Pole 8.1 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 500 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Minimum 12 V AC
  Minimum 12 V DC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 6 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(400 V AC) 6 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(400 V AC) 6 kA
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group I, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:10000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 16 / 16 mm²
• Tightening Torque:3 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:S201-C100
• Product ID:2CDS251001R0824
• Catalog Description:Miniature Circuit Breaker - S200 80-100A - 1P - C
• Long Description:S201-C100 MCB C-Char., 6kA, 100A, 1P

• Product Net Width:17.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.14 kg

• Standards:IEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles:1
• Tripping Characteristic:C
• Rated Current (In):100 A
• Rated Operational Voltage:acc. to IEC 60898-1 230 / 400 V AC
  acc. to IEC 60947-2 230 V AC
• Power Loss:at Rated Operating Conditions per Pole 9.8 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 500 V
• Operational Voltage:Maximum (Incl. Tolerance) 253 / 440 V AC
  Maximum 253 / 440 V AC
  Minimum 12 V AC
  Minimum 12 V DC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(230 / 400 V AC) 6 kA
  (60 V DC) 6 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 6 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 6 kA
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group I, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:10000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 16 / 16 mm²
• Tightening Torque:3 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product TypeS201-C80
• Product ID2CDS251001R0804
• Catalog DescriptionMiniature Circuit Breaker - S200 80-100A - 1P - C
• Long DescriptionS201-C80 MCB C-Char., 6kA, 80A, 1P

• Product Net Width17.5 mm
• Product Net Depth69 mm
• Product Net Height88 mm
• Product Net Weight0.14 kg

• StandardsIEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles1
• Tripping CharacteristicC
• Rated Current (In)80 A
• Rated Operational Voltageacc. to IEC 60898-1 230 / 400 V AC
  acc. to IEC 60947-2 230 V AC
• Power Lossat Rated Operating Conditions per Pole 8.1 W
• Rated Insulation Voltage (Ui)acc. to IEC/EN 60664-1 500 V
• Operational VoltageMaximum (Incl. Tolerance) 253 / 440 V AC
  Maximum 253 / 440 V AC
  Minimum 12 V AC
  Minimum 12 V DC
• Rated Frequency (f)50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn)(230 / 400 V AC) 6 kA
  (60 V DC) 6 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu)(230 V AC) 6 kA
• Rated Service Short-Circuit Breaking Capacity (Ics)(230 V AC) 6 kA
• Overvoltage CategoryIII
• Pollution Degree3
• Rated Impulse Withstand Voltage (Uimp)4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage50 / 60 Hz, 1 min 2 kV
• Housing MaterialInsulation Group I, RAL 7035
• Actuator TypeToggle
• Contact Position IndicationON / OFF
• Degree of ProtectionIP20
• RemarksIP40 in enclosure with cover
• Electrical Endurance10000 AC cycle
• Mechanical Endurance20000 cycle
• Terminal TypeScrew Terminals
• Screw Terminal TypeFailsafe Bi-directional Cylinder-lift Terminal
• Connecting CapacityBusbar 16 / 16 mm
• Tightening Torque3 Nm
• Recommended Screw DriverPozidriv 2
• Mounting on DIN RailTH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Mounting PositionAny

• Ambient Air TemperatureOperation -25 ... +55 DegreeC
  Storage -40 ... +70 DegreeC
• Resistance to Shock acc. to IEC 60068-2-2725g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions28 cycles
  with 55 DegreeC / 90-96 %
  and 25 DegreeC / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:S201M-C20DC
• Product ID:2CDS271064R0204
• Catalog Description:Miniature Circuit Breaker - S200M - 1P - C
• Long Description:System pro M compact S200M miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 10 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200M comply with IEC/EN 60898-1 and IEC/EN 609 47-2, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200M to save 50% space.

• Product Net Width:17.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.125 kg

• Standards:IEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles:1
• Tripping Characteristic:C
• Rated Current (In):20 A
• Rated Operational Voltage:acc. to IEC 60898-1 230 / 400 V AC
  acc. to IEC 60947-2 230 V AC
• Power Loss:2.5 W
  at Rated Operating Conditions per Pole 2.5 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 253 V AC
  Maximum (Incl. Tolerance) 72 V DC
  Maximum 253 V AC
  Maximum 72 V DC
  Minimum 12 V AC
  Minimum 12 V DC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(230 / 400 V AC) 10 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(133 V AC) 25 kA
  (230 V AC) 15 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(133 V AC) 18.8 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Insulation group II, black, sealable
• Contact Position Indication:Red ON / Green OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 10 / 10 mm²
  Flexible with Ferrule 0.75 ... 25 mm²
  Flexible 0.75 ... 25 mm²
  Rigid 0.75 ... 35 mm²
  Stranded 0.75 ... 35 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
  TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:S202-C100
• Product ID:2CDS252001R0824
• Catalog Description:Miniature Circuit Breaker - S200 80-100A - 2P - C
• Long Description:S202-C100 MCB C-Char., 6kA, 100A, 2P

• Product Net Width:35 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.28 kg

• Standards:IEC/EN 60898-1
• 
  IEC/EN 60947-2
• Number of Poles:2
• Tripping Characteristic:C
• Rated Current (In):100 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
  acc. to IEC 60947-2 400 V AC
• Power Loss:at Rated Operating Conditions per Pole 9.8 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 500 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Minimum 12 V AC
  Minimum 12 V DC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 6 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(400 V AC) 6 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(400 V AC) 6 kA
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group I, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:10000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 16 / 16 mm²
• Tightening Torque:3 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

Extended Product TypeS203-C100Product ID2CDS253001R0824Catalog DescriptionMiniature Circuit Breaker - S200 80-100A - 3P - CLong DescriptionS203-C100 MCB C-Char., 6kA, 100A, 3P

Dimensions

Product Net Width52.5 mmProduct Net Depth69 mmProduct Net Height88 mmProduct Net Weight0.42 kg

Specification

StandardsIEC/EN 60898-1

IEC/EN 60947-2Number of Poles3Tripping CharacteristicCRated Current (In)100 ARated Operational Voltageacc. to IEC 60898-1 400 V AC

acc. to IEC 60947-2 400 V ACPower Lossat Rated Operating Conditions per Pole 9.8 WRated Insulation Voltage (Ui)acc. to IEC/EN 60664-1 500 VOperational VoltageMaximum (Incl. Tolerance) 440 V AC

Maximum 440 V AC

Minimum 12 V ACRated Frequency (f)50 Hz

60 HzRated Short-Circuit Capacity (Icn)(400 V AC) 6 kARated Ultimate Short-Circuit Breaking Capacity (Icu)(400 V AC) 6 kARated Service Short-Circuit Breaking Capacity (Ics)(400 V AC) 6 kAOvervoltage CategoryIIIPollution Degree3Rated Impulse Withstand Voltage (Uimp)4 kV

(6.2 kV @ sea level)

(5.0 kV @ 2000 m)Dielectric Test Voltage50 / 60 Hz, 1 min 2 kVHousing MaterialInsulation Group I, RAL 7035Actuator TypeToggleContact Position IndicationON / OFFDegree of ProtectionIP20RemarksIP40 in enclosure with coverElectrical Endurance10000 AC cycleMechanical Endurance20000 cycleTerminal TypeScrew TerminalsScrew Terminal TypeFailsafe Bi-directional Cylinder-lift TerminalConnecting CapacityBusbar 16 / 16 mmTightening Torque3 NmRecommended Screw DriverPozidriv 2Mounting on DIN RailTH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715

TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715Mounting PositionAny

Environmental

Ambient Air TemperatureOperation -25 ... +55 DegreeC

Storage -40 ... +70 DegreeCResistance to Shock acc. to IEC 60068-2-2725g / 2 shocks / 13 msResistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 InEnvironmental Conditions28 cycles

with 55 DegreeC / 90-96 %

and 25 DegreeC / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:S204-C80
• Product ID:2CDS254001R0804
• Catalog Description:Miniature Circuit Breaker - S200 80-100A - 4P - C
• Long Description:S204-C80 MCB C-Char., 6kA, 80A, 4P

• Product Net Width:70 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.56 kg

• Standards:IEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles:4
• Tripping Characteristic:C
• Rated Current (In):80 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
  acc. to IEC 60947-2 400 V AC
• Power Loss:at Rated Operating Conditions per Pole 8.1 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 500 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Minimum 12 V AC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 6 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(400 V AC) 6 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(400 V AC) 6 kA
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group I, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:10000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 16 / 16 mm²
• Tightening Torque:3 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product TypeS204-C100
• Product ID2CDS254001R0824
• Catalog DescriptionMiniature Circuit Breaker - S200 80-100A - 4P - C
• Long DescriptionS204-C100 MCB C-Char., 6kA, 100A, 4P

• Product Net Width70 mm
• Product Net Depth69 mm
• Product Net Height88 mm
• Product Net Weight0.56 kg

• StandardsIEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles4
• Tripping CharacteristicC
• Rated Current (In)100 A
• Rated Operational Voltageacc. to IEC 60898-1 400 V AC
  acc. to IEC 60947-2 400 V AC
• Power Lossat Rated Operating Conditions per Pole 9.8 W
• Rated Insulation Voltage (Ui)acc. to IEC/EN 60664-1 500 V
• Operational VoltageMaximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Minimum 12 V AC
• Rated Frequency (f)50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn)(400 V AC) 6 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu)(400 V AC) 6 kA
• Rated Service Short-Circuit Breaking Capacity (Ics)(400 V AC) 6 kA
• Overvoltage CategoryIII
• Pollution Degree3
• Rated Impulse Withstand Voltage (Uimp)4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage50 / 60 Hz, 1 min 2 kV
• Housing MaterialInsulation Group I, RAL 7035
• Actuator TypeToggle
• Contact Position IndicationON / OFF
• Degree of ProtectionIP20
• RemarksIP40 in enclosure with cover
• Electrical Endurance10000 AC cycle
• Mechanical Endurance20000 cycle
• Terminal TypeScrew Terminals
• Screw Terminal TypeFailsafe Bi-directional Cylinder-lift Terminal
• Connecting CapacityBusbar 16 / 16 mm
• Tightening Torque3 Nm
• Recommended Screw DriverPozidriv 2
• Mounting on DIN RailTH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Mounting PositionAny

• Ambient Air TemperatureOperation -25 ... +55 DegreeC
  Storage -40 ... +70 DegreeC
• Resistance to Shock acc. to IEC 60068-2-2725g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions28 cycles
  with 55 DegreeC / 90-96 %
  and 25 DegreeC / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:S801B-C125
• Product ID:2CCS811001R0844
• Catalog Description:S801B-C125
• Long Description:The S801B-C125 is a 1-pole High Performance Circuit breaker with C-characteristic, with cage terminal and a rated current of 125 A. It is a current limiting device with a maximum breaking capacity of 16kA at 230/400V. It can be used for voltages up to 230/400V. It has two different tripping mechanisms, the thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. The S801B-C125 complies with IEC/EN 60947-2 and EN 60898-1 and allows the use for residential, commercial and industrial applications. It has numerous of approvals, therefore it can be used worldwide. The extensive range of accessory makes the use of S801B-C125 more comfortable. Due to the fast arc extinction of S801B-C125 your application will be secured.

• Product Net Width:27 mm
• Product Net Depth:82.5 mm
• Product Net Height:95 mm
• Product Net Weight:0.24 kg

• Standards:IEC/EN 60947-2IEC/EN 60898-1
• Number of Poles:1
• Tripping Characteristic:C
• Rated Current (In):125 A
• Rated Operational Voltage:230/400 V AC
• Power Loss:at Rated Operating Conditions per Pole 10.9 W
• Rated Insulation Voltage (Ui):440 V AC
• Rated Frequency (f):50 / 60 Hz
• Rated Short-Circuit Capacity (Icn):10 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 / 400 V AC) 16 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(230 / 400 V AC) 10 kA
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
• Housing Material:Insulation group I, RAL 7035
• Contact Position Indication:ON / OFF / TRIP
• Degree of Protection:acc. to IEC 60529 IP20
• Remarks:Connection from top and bottom Connecting with CU only IP40 in enclosure with cover Cage terminal with captIIIe screw
• Terminal Type:Screw Terminals
• Connecting Capacity:Flexible 1 ... 50 mm²,Flexible Stranded 1 …70 mm²
• Tightening Torque:3.5 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +60 °C Storage -40 ... +70 °C

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:S802B-C125
• Product ID:2CCS812001R0844
• Catalog Description:S802B-C125
• Long Description:The S802B-C125 is a 2-pole High Performance Circuit breaker with C-characteristic, with cage terminal and a rated current of 125 A. It is a current limiting device with a maximum breaking capacity of 16kA at 230/400V. It can be used for voltages up to 230/400V. It has two different tripping mechanisms, the thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. The S802B-C125 complies with IEC/EN 60947-2 and EN 60898-1 and allows the use for residential, commercial and industrial applications. It has numerous of approvals, therefore it can be used worldwide. The extensive range of accessory makes the use of S802B-C125 more comfortable. Due to the fast arc extinction of S802B-C125 your application will be secured.

• Product Net Width:54 mm
• Product Net Depth:82.5 mm
• Product Net Height:95 mm
• Product Net Weight:0.49 kg

• Standards:IEC/EN 60947-2IEC/EN 60898-1
• Number of Poles:2
• Tripping Characteristic:C
• Rated Current (In):125 A
• Rated Operational Voltage:230/400 V AC
• Power Loss:at Rated Operating Conditions per Pole 10.9 W
• Rated Insulation Voltage (Ui):440 V AC
• Rated Frequency (f):50 / 60 Hz
• Rated Short-Circuit Capacity (Icn):10 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 / 400 V AC) 16 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(230 / 400 V AC) 10 kA
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
• Housing Material:Insulation group I, RAL 7035
• Contact Position Indication:ON / OFF / TRIP
• Degree of Protection:acc. to IEC 60529 IP20
• Remarks:Connection from top and bottom Connecting with CU only IP40 in enclosure with cover Cage terminal with captIIIe screw
• Terminal Type:Screw Terminals
• Connecting Capacity:Flexible 1 ... 50 mm²,Flexible Stranded 1 …70 mm²
• Tightening Torque:3.5 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715,TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +60 °C Storage -40 ... +70 °C

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:S803B-C125
• Product ID:2CCS813001R0844
• Catalog Description:S803B-C125
• Long Description:The S803B-C125 is a 3-pole High Performance Circuit breaker with C-characteristic, with cage terminal and a rated current of 125 A. It is a current limiting device with a maximum breaking capacity of 16kA at 230/400V. It can be used for voltages up to 230/400V. It has two different tripping mechanisms, the thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. The S803B-C125 complies with IEC/EN 60947-2 and EN 60898-1 and allows the use for residential, commercial and industrial applications. It has numerous of approvals, therefore it can be used worldwide. The extensive range of accessory makes the use of S803B-C125 more comfortable. Due to the fast arc extinction of S803B-C125 your application will be secured.

• Product Net Width:81 mm
• Product Net Depth:82.5 mm
• Product Net Height:95 mm
• Product Net Weight:0.74 kg

• Standards:IEC/EN 60947-2IEC/EN 60898-1
• Number of Poles:3
• Tripping Characteristic:C
• Rated Current (In):125 A
• Rated Operational Voltage:230/400 V AC
• Power Loss:at Rated Operating Conditions per Pole 10.9 W
• Rated Insulation Voltage (Ui):440 V AC
• Rated Frequency (f):50 / 60 Hz
• Rated Short-Circuit Capacity (Icn):10 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 / 400 V AC) 16 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(230 / 400 V AC) 10 kA
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
• Housing Material:Insulation group I, RAL 7035
• Contact Position Indication:ON / OFF / TRIP
• Degree of Protection:acc. to IEC 60529 IP20
• Remarks:Connection from top and bottom Connecting with CU only IP40 in enclosure with cover Cage terminal with captIIIe screw
• Terminal Type:Screw Terminals
• Connecting Capacity:Flexible 1 ... 50 mm²Flexible Stranded 1 …70 mm²
• Tightening Torque:3.5 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715,TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +60 °CStorage -40 ... +70 °C

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:S804B-C125
• Product ID:2CCS814001R0844
• Catalog Description:S804B-C125
• Long Description:The S804B-C125 is a 4-pole High Performance Circuit breaker with C-characteristic, with cage terminal and a rated current of 125 A. It is a current limiting device with a maximum breaking capacity of 16kA at 230/400V. It can be used for voltages up to 230/400V. It has two different tripping mechanisms, the thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. The S804B-C125 complies with IEC/EN 60947-2 and EN 60898-1 and allows the use for residential, commercial and industrial applications. It has numerous of approvals, therefore it can be used worldwide. The extensive range of accessory makes the use of S804B-C125 more comfortable. Due to the fast arc extinction of S804B-C125 your application will be secured.

• Product Net Width:106 mm
• Product Net Depth:82.5 mm
• Product Net Height:95 mm
• Product Net Weight:0.98 kg

• Standards:IEC/EN 60947-2
  IEC/EN 60898-1
• Number of Poles:4
• Tripping Characteristic:C
• Rated Current (In):125 A
• Rated Operational Voltage:230/400 V AC
• Power Loss:at Rated Operating Conditions per Pole 10.9 W
• Rated Insulation Voltage (Ui):440 V AC
• Rated Frequency (f):50 / 60 Hz
• Rated Short-Circuit Capacity (Icn):10 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 / 400 V AC) 16 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(230 / 400 V AC) 10 kA
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
• Housing Material:Insulation group I, RAL 7035
• Contact Position Indication:ON / OFF / TRIP
• Degree of Protection:acc. to IEC 60529 IP20
• Remarks:Connection from top and bottom
  Connecting with CU only
  IP40 in enclosure with cover
  Cage terminal with captIIIe screw
• Terminal Type:Screw Terminals
• Connecting Capacity:Flexible 1 ... 50 mm²
  Flexible Stranded
  1 …70 mm²
• Tightening Torque:3.5 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +60 °C
  Storage -40 ... +70 °C

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:FH200 AC-40/0,3
• Product ID:1SYF202006R3400
• Catalog Description:FH200 AC-40/0,3 - Residual Current Dev.
• Long Description:The RCCBs FH200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous AC and A types is particularly suitable for installation in domestic applications.

• Product Net Width:0.035 m
• Product Net Height:0.085 m
• Product Net Depth:0.069 m
• Product Net Weight:0.200 kg

• Standards:IEC 61008
• Operating Characteristic:Instantaneous
• Type of Residual Current:AC type
• Rated Residual Current:300 mA
• Rated Current (In):40 A
• Number of Poles:2
• Power Loss:at Rated Operating Conditions per Pole 2.4 W

• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:FH204 AC-25/0,03
• Product ID:1SYF204006R1250
• Catalog Description:FH204 AC-25/0,03 - Residual Current Dev.
• Long Description:The RCCBs FH200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous AC and A types is particularly suitable for installation in domestic applications.

• Product Net Width:0.070 m
• Product Net Height:0.085 m
• Product Net Depth:0.069 m
• Product Net Weight:0.360 kg

• Standards:IEC 61008
• Operating Characteristic:Instantaneous
• Type of Residual Current:AC type
• Rated Residual Current:30 mA
• Rated Current (In):25 A
• Number of Poles:4
• Position of Neutral Terminals:Right
• Power Loss:at Rated Operating Conditions per Pole 1.3 W

• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

• Extended Product Type:FH204 AC-40/0,1
• Product ID:1SYF204006R2400
• Catalog Description:FH204 AC-40/0,1 - Residual Current Dev.
• Long Description:The RCCBs FH200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous AC and A types is particularly suitable for installation in domestic applications.

• Product Net Width:0.070 m
• Product Net Height:0.085 m
• Product Net Depth:0.069 m
• Product Net Weight:0.360 kg

• Standards:IEC 61008
• Operating Characteristic:Instantaneous
• Type of Residual Current:AC type
• Rated Residual Current:100 mA
• Rated Current (In):40 A
• Number of Poles:4
• Position of Neutral Terminals:Right
• Power Loss:at Rated Operating Conditions per Pole 3.2 W

• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:FH204 AC-63/0,1
• Product ID:1SYF204006R2630
• Catalog Description:FH204 AC-63/0,1 - Residual Current Dev.
• Long Description:The RCCBs FH200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous AC and A types is particularly suitable for installation in domestic applications.

• Product Net Width:0.070 m
• Product Net Height:0.085 m
• Product Net Depth:0.069 m
• Product Net Weight:0.360 kg

• Standards:IEC 61008
• Operating Characteristic:Instantaneous
• Type of Residual Current:AC type
• Rated Residual Current:100 mA
• Rated Current (In):63 A
• Number of Poles:4
• Position of Neutral Terminals:Right
• Power Loss:at Rated Operating Conditions per Pole 4.4 W

• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:FH204 AC-63/0,3
• Product ID:1SYF204006R3630
• Catalog Description:FH204 AC-63/0,3 - Residual Current Dev.
• Long Description:The RCCBs FH200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous AC and A types is particularly suitable for installation in domestic applications.

• Product Net Width:0.070 m
• Product Net Height:0.085 m
• Product Net Depth:0.069 m
• Product Net Weight:0.360 kg

• Standards:IEC 61008
• Operating Characteristic:Instantaneous
• Type of Residual Current:AC type
• Rated Residual Current:300 mA
• Rated Current (In):63 A
• Number of Poles:4
• Position of Neutral Terminals:Right
• Power Loss:at Rated Operating Conditions per Pole 4.4 W

• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

• Extended Product Type:S204M-D25
• Product ID:2CDS274001R0251
• Catalog Description:Miniature Circuit Breaker - S200M - 4P - D
• Long Description:System pro M compact S200M miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 10 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200M comply with IEC/EN 60898-1 and IEC/EN 609 47-2, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200M to save 50% space.

• Product Net Width:70 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.5 kg

• Standards:IEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles:4
• Tripping Characteristic:D
• Rated Current (In):25 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
  acc. to IEC 60947-2 440 V AC
• Power Loss:12.4 W
  at Rated Operating Conditions per Pole 3.1 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Minimum 12 V AC
  Minimum 12 V DC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 25 kA
  (440 V AC) 15 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 18.8 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Insulation group II, black, sealable
• Contact Position Indication:Red ON / Green OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 10 / 10 mm²
  Flexible with Ferrule 0.75 ... 25 mm²
  Flexible 0.75 ... 25 mm²
  Rigid 0.75 ... 35 mm²
  Stranded 0.75 ... 35 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
  TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:FH202 AC-25/0,1
• Product ID:1SYF202006R2250
• EAN:8012542894506
• Catalog Description:FH202 AC-25/0,1 - Residual Current Dev.
• Long Description:The RCCBs FH200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous AC and A types is particularly suitable for installation in domestic applications.

• Product Net Width:0.035 m
• Product Net Height:0.085 m
• Product Net Depth:0.069 m
• Product Net Weight:0.200 kg

• Standards:IEC 61008
• Operating Characteristic:Instantaneous
• Type of Residual Current:AC type
• Rated Residual Current:100 mA
• Rated Current (In):25 A
• Number of Poles:2
• Power Loss:at Rated Operating Conditions per Pole 1 W

• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:FH202 AC-25/0,03
• Product ID:1SYF202006R1250
• Catalog Description:FH202 AC-25/0,03 - Residual Current Dev.
• Long Description:The RCCBs FH200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous AC and A types is particularly suitable for installation in domestic applications.

• Standards:IEC 61008
• Operating Characteristic:Instantaneous
• Type of Residual Current:AC type
• Rated Residual Current:30 mA
• Rated Current (In):25 A
• Number of Poles:2
• Power Loss:at Rated Operating Conditions per Pole 1 W

• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:FH200 AC-40/0,03
• Product ISYF202006R1400
• Catalog Description:FH200 AC-40/0,03 - Residual Current Dev.
• Long Description:The RCCBs FH200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous AC and A types is particularly suitable for installation in domestic applications.

• Product Net Width:0.035 m
• Product Net Height:0.085 m
• Product Net Depth:0.069 m
• Product Net Weight:0.200 kg

• Standards:IEC 61008
• Operating Characteristic:Instantaneous
• Type of Residual Current:AC type
• Rated Residual Current:30 mA
• Rated Current (In):40 A
• Number of Poles:2
• Power Loss:at Rated Operating Conditions per Pole 2.4 W

• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:FH202 AC-25/0,3
• Product ID:1SYF202006R3250
• Catalog Description:FH202 AC-25/0,3 - Residual Current Dev.
• Long Description:The RCCBs FH200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous AC and A types is particularly suitable for installation in domestic applications.

• Product Net Width:0.035 m
• Product Net Height:0.085 m
• Product Net Depth:0.069 m
• Product Net Weight:0.200 kg

• Standards:IEC 61008
• Operating Characteristic:Instantaneous
• Type of Residual Current:AC type
• Rated Residual Current:300 mA
• Rated Current (In):25 A
• Number of Poles:2
• Power Loss:at Rated Operating Conditions per Pole 1 W

• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

• Extended Product Type:FH202 AC-40/0,1
• Product ID:1SYF202006R2400
• Catalog Description:FH202 AC-40/0,1 - Residual Current Dev.
• Long Description:The RCCBs FH200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous AC and A types is particularly suitable for installation in domestic applications.

• Product Net Width:0.035 m
• Product Net Height:0.085 m
• Product Net Depth:0.069 m
• Product Net Weight:0.200 kg

• Standards:IEC 61008
• Operating Characteristic:Instantaneous
• Type of Residual Current:AC type
• Rated Residual Current:100 mA
• Rated Current (In):40 A
• Number of Poles:2
• Power Loss:at Rated Operating Conditions per Pole 2.4 W

• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Minimum Order Quantity: 1 Unit

Product Details:

• Extended Product Type:FH202 AC-63/0,03
• Product ID:1SYF202002R1630
• Catalog Description:FH202 AC-63/0,03 - Resid. Current Dev.
• Long Description:The RCCBs FH200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous AC and A types is particularly suitable for installation in domestic applications.

• Product Net Width:0.035 m
• Product Net Height:0.085 m
• Product Net Depth:0.069 m
• Product Net Weight:0.200 kg

• Standards:IEC/EN 61008
• Operating Characteristic:Instantaneous
• Type of Residual Current:AC type
• Rated Residual Current:30 mA
• Rated Current (In):63 A
• Number of Poles:2
• Power Loss:at Rated Operating Conditions per Pole 3.2 W

• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:FH202 AC-63/0,1
• Product ID:1SYF202006R2630
• Catalog Description:FH202 AC-63/0,1 - Residual Current Dev.
• Long Description:The RCCBs FH200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous AC and A types is particularly suitable for installation in domestic applications.

• Product Net Width:0.035 m
• Product Net Height:0.085 m
• Product Net Depth:0.069 m
• Product Net Weight:0.200 kg

• Standards:IEC 61008
• Operating Characteristic:Instantaneous
• Type of Residual Current:AC type
• Rated Residual Current:100 mA
• Rated Current (In):63 A
• Number of Poles:2
• Power Loss:at Rated Operating Conditions per Pole 3.2 W

• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:FH204 AC-25/0,1
• Product ID:1SYF204006R2250
• Catalog Description:FH204 AC-25/0,1 - Residual Current Dev.
• Long Description:The RCCBs FH200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous AC and A types is particularly suitable for installation in domestic applications.

• Product Net Width:0.070 m
• Product Net Height:0.085 m
• Product Net Depth:0.069 m
• Product Net Weight:0.360 kg

• Standards:IEC 61008
• Operating Characteristic:Instantaneous
• Type of Residual Current:AC type
• Rated Residual Current:100 mA
• Rated Current (In):25 A
• Number of Poles:4
• Position of Neutral Terminals:Right
• Power Loss:at Rated Operating Conditions per Pole 1.3 W

• RoHS Status:Following EU Directive 2011/65/EC

Product Details:

• Extended Product Type:FH204 AC-40/0,3
• Product ID:1SYF204006R3400
• Catalog Description:FH204 AC-40/0,3 - Residual Current Dev.
• Long Description:The RCCBs FH200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous AC and A types is particularly suitable for installation in domestic applications.

• Product Net Width:0.070 m
• Product Net Height:0.085 m
• Product Net Depth:0.069 m
• Product Net Weight:0.360 kg

• Standards:IEC 61008
• Operating Characteristic:Instantaneous
• Type of Residual Current:AC type
• Rated Residual Current:300 mA
• Rated Current (In):40 A
• Number of Poles:4
• Position of Neutral Terminals:Right
• Power Loss:at Rated Operating Conditions per Pole 3.2 W

• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:FH202 AC-63/0,3
• Product ID:1SYF202006R3630
• Catalog Description:FH202 AC-63/0,3 - Residual Current Dev.
• Long Description:The RCCBs FH200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous AC and A types is particularly suitable for installation in domestic applications.

• Product Net Width:0.035 m
• Product Net Height:0.085 m
• Product Net Depth:0.069 m
• Product Net Weight:0.200 kg

• Standards:IEC 61008
• Operating Characteristic:Instantaneous
• Type of Residual Current:AC type
• Rated Residual Current:300 mA
• Rated Current (In):63 A
• Number of Poles:2
• Power Loss:at Rated Operating Conditions per Pole 3.2 W

• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:FH204 AC-25/0,3
• Product ID:1SYF204006R3250
• Catalog Description:FH204 AC-25/0,3 - Residual Current Dev.
• Long Description:The RCCBs FH200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous AC and A types is particularly suitable for installation in domestic applications.

• Product Net Width:0.070 m
• Product Net Height:0.085 m
• Product Net Depth:0.069 m
• Product Net Weight:0.360 kg

• Standards:IEC 61008
• Operating Characteristic:Instantaneous
• Type of Residual Current:AC type
• Rated Residual Current:300 mA
• Rated Current (In):25 A
• Number of Poles:4
• Position of Neutral Terminals:Right
• Power Loss:at Rated Operating Conditions per Pole 1.3 W

• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

• Extended Product Type:FH204 AC-63/0,03
• Product ID:1SYF204006R1630
• Catalog Description:FH204 AC-63/0,03 - Residual Current Dev.
• Long Description:The RCCBs FH200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous AC and A types is particularly suitable for installation in domestic applications.

• Product Net Width:0.070 m
• Product Net Height:0.085 m
• Product Net Depth:0.069 m
• Product Net Weight:0.360 kg

• Standards:IEC 61008
• Operating Characteristic:Instantaneous
• Type of Residual Current:AC type
• Rated Residual Current:30 mA
• Rated Current (In):63 A
• Number of Poles:4
• Position of Neutral Terminals:Right
• Power Loss:at Rated Operating Conditions per Pole 4.4 W

• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:F202 AC-25/0,03 IEC
• Product ID:1SYF202005R1250
• Catalog Description:F202 AC-25/0,03 IEC - Resid. Curr. Dev.
• Long Description:The RCCBs F200 series assures protection to people and installations against fault current to earth. This product is manufactured according to international IEC standards, for the markets where it is required.

• Product Net Width:0.035 m
• Product Net Height:0.085 m
• Product Net Depth:0.069 m
• Product Net Weight:0.200 kg

• Standards:IEC 61008
• Operating Characteristic:Instantaneous
• Type of Residual Current:AC type
• Rated Residual Current:30 mA
• Rated Current (In):25 A
• Number of Poles:2
• Power Loss:at Rated Operating Conditions per Pole 1 W

• RoHS Status:Following EU Directive 2011/65/EC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SHD201/16
• Product ID:2SYD271111R0016
• Catalog Description:SHD201/16 Switch Disconnector 1P, 16A
• Long Description:SHD201/16 Switch Disconnector 1P, 16A

• Product Net Width:17.5 mm
• Product Net Height:85 mm
• Product Net Depth:69 mm
• Product Net Weight:0.075 kg

• Rated Operational Voltage:240 V AC
  60 V DC

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

Extended Product Type:SHD202/40Product ID:1SYD272111R0040Catalog Description:SHD202/40 Switch Disconnector 2P, 40ALong Description:SHD202/40 Switch Disconnector 2P, 40A

Dimensions

Product Net Width:35 mmProduct Net Height:85 mmProduct Net Depth:69 mmProduct Net Weight:0.15 kg

Specification

Rated Operational Voltage:415 V AC

125 V DC

Environmental

Ambient Air Temperature:Operation -25 ... +55 DegreeC

Storage -40 ... +70 DegreeCResistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 InResistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

Extended Product Type:SHD203/25Product ID:1SYD273111R0025Catalog Description:SHD203/25 Switch Disconnector 3P, 25ALong Description:SHD203/25 Switch Disconnector 3P, 25A

Dimensions

Product Net Width:52.5 mmProduct Net Height:85 mmProduct Net Depth:69 mmProduct Net Weight:0.225 kg

Specification

Rated Operational Voltage:415 V AC

Environmental

Ambient Air Temperature:Operation -25 ... +55 DegreeC

Storage -40 ... +70 DegreeCResistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 InResistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

Extended Product TypeSHD204/25Product ID1SYD274111R0025Catalog DescriptionSHD204/25 Switch Disconnector 4P, 25ALong DescriptionSHD204/25 Switch Disconnector 4P, 25A

Dimensions

Product Net Width70 mmProduct Net Height85 mmProduct Net Depth69 mmProduct Net Weight0.3 kg

Specification

Rated Operational Voltage415 V AC

Environmental

Ambient Air TemperatureOperation -25 ... +55 DegreeC

Storage -40 ... +70 DegreeCResistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 InResistance to Shock acc. to IEC 60068-2-2725g / 2 shocks / 13 ms

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:E201/80
• Product ID:2CDE281001R0080
• Catalog Description:Isolator E201/80r
• Long Description:These devices are suitable for commanding loads and they are realized according EN 60947-3 and EN 60669-1 respectively. Fast removal without dismantling of the busbar. Captive screws with recessed/slotted head. Pozidrive size 2. Add-on of up to 3 auxiliary contact S2C-H6R possible Integrated lay-on edge for labeling system ILS. Locking device as accessories for unauthorized ON/OFF. Approval: VDE, CCC, KEMA

• Product Net Width:17.5 mm
• Product Net Height:85 mm
• Product Net Depth:69 mm
• Product Net Weight:0.095 kg

• Standards:IEC/EN 60947-3
• Rated Operational Voltage:230 / 400 V AC

• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:E202/125
• Product ID:2CDE282001R0125
• Catalog Description:Isolator E202/125r
• Long Description:These devices are suitable for commanding loads and they are realized according EN 60947-3 and EN 60669-1 respectively. Fast removal without dismantling of the busbar. Captive screws with recessed/slotted head. Pozidrive size 2. Add-on of up to 3 auxiliary contact S2C-H6R possible Integrated lay-on edge for labeling system ILS. Locking device as accessories for unauthorized ON/OFF. Approval: VDE, CCC, KEMA

• Product Net Width:35 mm
• Product Net Height:85 mm
• Product Net Depth:69 mm
• Product Net Weight:0.19 kg

• Standards:IEC/EN 60947-3
• Rated Operational Voltage:230 / 400 V AC

• RoHS Status:Following EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product TypeE203/80
• Product ID2CDE283001R0080
• Catalog DescriptionIsolator E203/80r
• Long DescriptionThese devices are suitable for commanding loads and they are realized according EN 60947-3 and EN 60669-1 respectively. Fast removal without dismantling of the busbar. Captive screws with recessed/slotted head. Pozidrive size 2. Add-on of up to 3 auxiliary contact S2C-H6R possible Integrated lay-on edge for labeling system ILS. Locking device as accessories for unauthorized ON/OFF. Approval VDE, CCC, KEMA

• Product Net Width52.5mm
• Product Net Height85mm
• Product Net Depth69mm
• Product Net Weight0.29kg

• StandardsIEC/EN 60947-3
• Rated Operational Voltage230 / 400 V AC

• RoHS StatusFollowing EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product TypeE204/80
• Product ID2CDE284001R0080
• Catalog DescriptionIsolator E204/80r
• Long DescriptionThese devices are suitable for commanding loads and they are realized according EN 60947-3 and EN 60669-1 respectively. Fast removal without dismantling of the busbar. Captive screws with recessed/slotted head. Pozidrive size 2. Add-on of up to 3 auxiliary contact S2C-H6R possible Integrated lay-on edge for labeling system ILS. Locking device as accessories for unauthorized ON/OFF. Approval VDE, CCC, KEMA

• Product Net Width70mm
• Product Net Height85mm
• Product Net Depth69mm
• Product Net Weight0.39kg

• StandardsIEC/EN 60947-3
• Rated Operational Voltage230 / 400 V AC

• RoHS StatusFollowing EU Directive 2002/95/EC August 18, 2005 and amendment

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:S202M-C16DC
• Product ID:2CDS272064R0164
• Catalog Description:Miniature Circuit Breaker - S200M - 2P - C
• Long Description:System pro M compact S200M miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 10 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200M comply with IEC/EN 60898-1 and IEC/EN 609 47-2, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200M to save 50% space

• Product Net Width:35 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.25 kg

• Standards:IEC/EN 60898-1
  IEC/dilhEN 60947-2
• Number of Poles:2
• Tripping Characteristic:C
• Rated Current (In):16 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
  acc. to IEC 60947-2 440 V AC
• Power Loss:5 W
  at Rated Operating Conditions per Pole 2.5 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 125 V DC
  Maximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Maximum 125 V DC
  Minimum 12 V AC
  Minimum 12 V DC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 25 kA
  (440 V AC) 15 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 18.8 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Insulation group II, black, sealable
• Contact Position Indication:Red ON / Green OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 10 / 10 mm²
  Flexible with Ferrule 0.75 ... 25 mm²
  Flexible 0.75 ... 25 mm²
  Rigid 0.75 ... 35 mm²
  Stranded 0.75 ... 35 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
  TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other