ABB CONTROLL PRODUCT'S

Product Details:

• Extended Product Type:SH203M-C3
• Product ID:1SYS273011R0034
• Catalog Description:Miniature Circuit Breaker - SH200M - 3P - C
• Long Description:SH203M-C3 MiniCircuitBreaker

• Product Net Width:52.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.375 kg

• Standards:IEC/EN 60898-1
• Number of Poles:3
• Tripping Characteristic:C
• Rated Current (In):3 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:3.9 W at Rated Operating Conditions per Pole 1.3 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²,
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C,Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 % and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH203M-C4
• Product ID:1SYS273011R0044
• Catalog Description:Miniature Circuit Breaker - SH200M - 3P - C
• Long Description:SH203M-C4 MiniCircuitBreaker

• Product Net Width:52.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.375 kg

• Standards:IEC/EN 60898-1
• Number of Poles:3
• Tripping Characteristic:C
• Rated Current (In):4 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:5.4 W at Rated Operating Conditions per Pole 1.8 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 % and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH203M-C10
• Product ID:1SYS273011R0104
• Catalog Description:Miniature Circuit Breaker - SH200M - 3P - C
• Long Description:SH203M-C10 MiniCircuitBreaker

• Product Net Width:52.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.375 kg

• Standards:IEC/EN 60898-1
• Number of Poles:3
• Tripping Characteristic:C
• Rated Current (In):10 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:6.3 W at Rated Operating Conditions per Pole 2.1 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycleswith 55 °C / 90-96 %and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH203M-C50
• Product ID:1SYS273011R0504
• Catalog Description:Miniature Circuit Breaker - SH200M - 3P - C
• Long Description:SH203M-C50 MiniCircuitBreaker

• Product Net Width:52.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.375 kg

• Standards:IEC/EN 60898-1
• Number of Poles:3
• Tripping Characteristic:C
• Rated Current (In):50 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:9.75 W at Rated Operating Conditions per Pole 3.25 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:10000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 %and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product TypeSH203M-C16
• Product ID1SYS273011R0164
• Catalog DescriptionMiniature Circuit Breaker - SH200M - 3P - C
• Long DescriptionSH203M-C16 MiniCircuitBreaker

• Product Net Width52.5 mm
• Product Net Depth69 mm
• Product Net Height88 mm
• Product Net Weight0.375 kg

• StandardsIEC/EN 60898-1
• Number of Poles3
• Tripping CharacteristicC
• Rated Current (In)16 A
• Rated Operational Voltageacc. to IEC 60898-1 400 V AC
• Power Loss7.5 W at Rated Operating Conditions per Pole 2.5 W
• Rated Insulation Voltage (Ui)acc. to IEC/EN 60664-1 440 V
• Operational VoltageMaximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f)50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn)(400 V AC) 10 kA
• Energy Limiting Class3
• Overvoltage CategoryIII
• Pollution Degree2
• Rated Impulse Withstand Voltage (Uimp)4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage50 / 60 Hz, 1 min 2 kV
• Housing MaterialInsulation Group II, RAL 7035
• Actuator TypeToggle
• Contact Position IndicationON / OFF
• Degree of ProtectionIP20
• RemarksIP40 in enclosure with cover
• Electrical Endurance20000 AC cycle
• Mechanical Endurance20000 cycle
• Terminal TypeScrew Terminals
• Screw Terminal TypeCage Terminal
• Connecting CapacityConductor 25 / 25 mm,Flexible with Ferrule 0.75 ... 16 mm,Flexible 0.75 ... 16 mm,Rigid 0.75 ... 25 mm,Stranded 0.75 ... 25 mm
• Tightening Torque2 Nm
• Recommended Screw DriverPozidriv 2
• Mounting on DIN RailTH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting PositionAny

• Ambient Air TemperatureOperation -25 ... +55 DegreeCStorage -40 ... +70 DegreeC
• Resistance to Shock acc. to IEC 60068-2-2725g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions28 cycles with 55 DegreeC / 90-96 % and 25 DegreeC / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

• Extended Product TypeSH204M-C4
• Product ID1SYS274011R0044
• Catalog DescriptionMiniature Circuit Breaker - SH200M - 4P - C
• Long DescriptionSH204M-C4 MiniCircuitBreaker

• Product Net Width70 mm
• Product Net Depth69 mm
• Product Net Height88 mm
• Product Net Weight0.5 kg

• StandardsIEC/EN 60898-1
• Number of Poles4
• Tripping CharacteristicC
• Rated Current (In)4 A
• Rated Operational Voltageacc. to IEC 60898-1 400 V AC
• Power Loss7.2 W at Rated Operating Conditions per Pole 1.8 W
• Rated Insulation Voltage (Ui)acc. to IEC/EN 60664-1 440 V
• Operational VoltageMaximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f)50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn)(400 V AC) 10 kA
• Energy Limiting Class3
• Overvoltage CategoryIII
• Pollution Degree2
• Rated Impulse Withstand Voltage (Uimp)4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage50 / 60 Hz, 1 min 2 kV
• Housing MaterialInsulation Group II, RAL 7035
• Actuator TypeToggle
• Contact Position IndicationON / OFF
• Degree of ProtectionIP20
• RemarksIP40 in enclosure with cover
• Electrical Endurance20000 AC cycle
• Mechanical Endurance20000 cycle
• Terminal TypeScrew Terminals
• Screw Terminal TypeCage Terminal
• Connecting CapacityConductor 25 / 25 mm,Flexible with Ferrule 0.75 ... 16 mm,Flexible 0.75 ... 16 mm,Rigid 0.75 ... 25 mm,Stranded 0.75 ... 25 mm,Tightening Torque2 Nm
• Recommended Screw DriverPozidriv 2
• Mounting on DIN RailTH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting PositionAny

• Ambient Air TemperatureOperation -25 ... +55 DegreeC Storage -40 ... +70 DegreeC
• Resistance to Shock acc. to IEC 60068-2-2725g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions28 cycles with 55 DegreeC / 90-96 %and 25 DegreeC / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

• Extended Product TypeS201M-C20
• Product ID2CDS271001R0204
• Catalog DescriptionMiniature Circuit Breaker - S200M - 1P - C
• Long DescriptionSystem pro M compact S200M miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 10 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200M comply with IEC/EN 60898-1 and IEC/EN 609 47-2, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200M to save 50% space.

• Product Net Width17.5 mm
• Product Net Depth69 mm
• Product Net Height88 mm
• Product Net Weight0.125 kg

• StandardsIEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles1
• Tripping CharacteristicC
• Rated Current (In)20 A
• Rated Operational Voltageacc. to IEC 60898-1 230 / 400 V AC
  acc. to IEC 60947-2 230 V AC
• Power Loss2.5 W
  at Rated Operating Conditions per Pole 2.5 W
• Rated Insulation Voltage (Ui)acc. to IEC/EN 60664-1 440 V
• Operational VoltageMaximum (Incl. Tolerance) 253 V AC
  Maximum (Incl. Tolerance) 72 V DC
  Maximum 253 V AC
  Maximum 72 V DC
  Minimum 12 V AC
  Minimum 12 V DC
• Rated Frequency (f)50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn)(230 / 400 V AC) 10 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu)(133 V AC) 25 kA
  (230 V AC) 15 kA
• Rated Service Short-Circuit Breaking Capacity (Ics)(133 V AC) 18.8 kA
• Energy Limiting Class3
• Overvoltage CategoryIII
• Pollution Degree3
• Rated Impulse Withstand Voltage (Uimp)4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage50 / 60 Hz, 1 min 2 kV
• Housing MaterialInsulation Group II, RAL 7035
• Actuator TypeInsulation group II, black, sealable
• Contact Position IndicationRed ON / Green OFF
• Degree of ProtectionIP20
• RemarksIP40 in enclosure with cover
• Electrical Endurance20000 AC cycle
• Mechanical Endurance20000 cycle
• Terminal TypeScrew Terminals
• Screw Terminal TypeFailsafe Bi-directional Cylinder-lift Terminal
• Connecting CapacityBusbar 10 / 10 mm
  Flexible with Ferrule 0.75 ... 25 mm
  Flexible 0.75 ... 25 mm
  Rigid 0.75 ... 35 mm
  Stranded 0.75 ... 35 mm
• Tightening Torque2 Nm
• Recommended Screw DriverPozidriv 2
• Mounting on DIN RailTH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
  TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting PositionAny

• Ambient Air TemperatureOperation -25 ... +55 DegreeC
  Storage -40 ... +70 DegreeC
• Resistance to Shock acc. to IEC 60068-2-2725g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions28 cycles
  with 55 DegreeC / 90-96 %
  and 25 DegreeC / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

• Extended Product TypeSH203M-C2
• Product ID1SYS273011R0024
• Catalog DescriptionMiniature Circuit Breaker - SH200M - 3P - C
• Long DescriptionSH203M-C2 MiniCircuitBreaker

• Product Net Width52.5 mm
• Product Net Depth69 mm
• Product Net Height88 mm
• Product Net Weight0.375 kg

• StandardsIEC/EN 60898-1
• Number of Poles3
• Tripping CharacteristicC
• Rated Current (In)2 A
• Rated Operational Voltageacc. to IEC 60898-1 400 V AC
• Power Loss5.4 W at Rated Operating Conditions per Pole 1.8 W
• Rated Insulation Voltage (Ui)acc. to IEC/EN 60664-1 440V
• Operational VoltageMaximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f)50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn)(400 V AC) 10 kA
• Energy Limiting Class3
• Overvoltage CategoryIII
• Pollution Degree2
• Rated Impulse Withstand Voltage (Uimp)4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage50 / 60 Hz, 1 min 2 kV
• Housing MaterialInsulation Group II, RAL 7035
• Actuator TypeToggle
• Contact Position IndicationON / OFF
• Degree of ProtectionIP20
• RemarksIP40 in enclosure with cover
• Electrical Endurance20000 AC cycle
• Mechanical Endurance20000 cycle
• Terminal TypeScrew Terminals
• Screw Terminal TypeCage Terminal
• Connecting CapacityConductor 25 / 25 mm,Flexible with Ferrule 0.75 ... 16 mm,Flexible 0.75 ... 16 mm,Rigid 0.75 ... 25 mm,Stranded 0.75 ... 25 mm
• Tightening Torque2 Nm
• Recommended Screw DriverPozidriv 2
• Mounting on DIN RailTH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting PositionAny

• Ambient Air TemperatureOperation -25 ... +55 DegreeC,Storage -40 ... +70 DegreeC
• Resistance to Shock acc. to IEC 60068-2-2725g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions28 cycleswith 55 DegreeC / 90-96 %and 25 DegreeC / 95-100 %

Additional Information:

• Pay Mode Terms: D/P,Other

Product Details:

• Extended Product Type:SH203M-C6
• Product ID:1SYS273011R0064
• Catalog Description:Miniature Circuit Breaker - SH200M - 3P - C
• Long Description:SH203M-C6 MiniCircuitBreaker

• Product Net Width:52.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.375 kg

• Standards:IEC/EN 60898-1
• Number of Poles:3
• Tripping Characteristic:C
• Rated Current (In):6 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:6 W  at Rated Operating Conditions per Pole 2 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 % and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH203M-C20
• Product ID:1SYS273011R0204
• Catalog Description:Miniature Circuit Breaker - SH200M - 3P - C
• Long Description:SH203M-C20 MiniCircuitBreaker

• Product Net Width:52.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.375 kg

• Standards:IEC/EN 60898-1
• Number of Poles:3
• Tripping Characteristic:C
• Rated Current (In):20 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:7.5 W at Rated Operating Conditions per Pole 2.5 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V ACMaximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycleswith 55 °C / 90-96 %and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH203M-C25
• Product ID:1SYS273011R0254
• Catalog Description:Miniature Circuit Breaker - SH200M - 3P - C
• Long Description:SH203M-C25 MiniCircuitBreaker

• Product Net Width:52.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.375 kg

• Standards:IEC/EN 60898-1
• Number of Poles:3
• Tripping Characteristic:C
• Rated Current (In):25 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:9.6 W at Rated Operating Conditions per Pole 3.2 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 %and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH203M-C32
• Product ID:1SYS273011R0324
• Catalog Description:Miniature Circuit Breaker - SH200M - 3P - C
• Long Description:SH203M-C32 MiniCircuitBreaker

• Product Net Width:52.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.375 kg

• Standards:IEC/EN 60898-1
• Number of Poles:3
• Tripping Characteristic:C
• Rated Current (In):32 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:11.1 W at Rated Operating Conditions per Pole 3.7 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:10000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 %and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH203M-C40
• Product ID:1SYS273011R0404
• Catalog Description:Miniature Circuit Breaker - SH200M - 3P - C
• Long Description:SH203M-C40 MiniCircuitBreaker

• Product Net Width:52.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.375 kg

• Standards:IEC/EN 60898-1
• Number of Poles:3
• Tripping Characteristic:C
• Rated Current (In):40 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:14.4 W at Rated Operating Conditions per Pole 4.8 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:10000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 %and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH203M-C63
• Product ID:1SYS273011R0634
• Catalog Description:Miniature Circuit Breaker - SH200M - 3P - C
• Long Description:SH203M-C63 MiniCircuitBreaker

• Product Net Width:52.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.375 kg

• Standards:IEC/EN 60898-1
• Number of Poles:3
• Tripping Characteristic:C
• Rated Current (In):63 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:14.4 W at Rated Operating Conditions per Pole 4.8 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:10000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 % and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH203M-C63NA
• Product ID:1SYS273113R0634
• Catalog Description:Miniature Circuit Breaker - S200M - 4P - C
• Long Description:System pro M compact S200M miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 10 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200M comply with IEC/EN 60898-1 and IEC/EN 609 47-2, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200M to save 50% space.

• Product Net Width:70 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.5 kg

• Standards:IEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles:4
• Tripping Characteristic:C
• Rated Current (In):63 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
  acc. to IEC 60947-2 440 V AC
• Power Loss:19.2 W
  at Rated Operating Conditions per Pole 4.8 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Minimum 12 V AC
  Minimum 12 V DC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 25 kA
  (440 V AC) 15 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 18.8 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Insulation group II, black, sealable
• Contact Position Indication:Red ON / Green OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:10000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 10 / 10 mm²
  Flexible with Ferrule 0.75 ... 25 mm²
  Flexible 0.75 ... 25 mm²
  Rigid 0.75 ... 35 mm²
  Stranded 0.75 ... 35 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
  TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

Extended Product TypeSH204M-C0,5Product ID1SYS274011R0984Catalog DescriptionMiniature Circuit Breaker - SH200M - 4P - CLong DescriptionSH204M-C0,5 MiniCircuitBreaker
Dimensions

Product Net Width70 mmProduct Net Depth69 mmProduct Net Height88 mmProduct Net Weight0.5 kg
Technical

StandardsIEC/EN 60898-1Number of Poles4Tripping CharacteristicCRated Current (In)0.5 ARated Operational Voltageacc. to IEC 60898-1 400 V ACPower Loss5.6 W at Rated Operating Conditions per Pole 1.4 WRated Insulation Voltage (Ui)acc. to IEC/EN 60664-1 440 VOperational VoltageMaximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V ACRated Frequency (f)50 Hz,60 HzRated Short-Circuit Capacity (Icn)(400 V AC) 10 kAEnergy Limiting Class3Overvoltage CategoryIIIPollution Degree2Rated Impulse Withstand Voltage (Uimp)4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)Dielectric Test Voltage50 / 60 Hz, 1 min 2 kVHousing MaterialInsulation Group II, RAL 7035Actuator TypeToggleContact Position IndicationON / OFFDegree of ProtectionIP20RemarksIP40 in enclosure with coverElectrical Endurance20000 AC cycleMechanical Endurance20000 cycleTerminal TypeScrew TerminalsScrew Terminal TypeCage TerminalConnecting CapacityConductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²Tightening Torque2 N·mRecommended Screw DriverPozidriv 2Mounting on DIN RailTH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715Mounting PositionAny
Environmental

Ambient Air TemperatureOperation -25 ... +55 DegreeC,Storage -40 ... +70 DegreeCResistance to Shock acc. to IEC 60068-2-2725g / 2 shocks / 13 msResistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 InEnvironmental Conditions28 cycles with 55 DegreeC / 90-96 %and 25 DegreeC / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH204M-C1
• Product ID:1SYS274011R0014
• Catalog Description:Miniature Circuit Breaker - SH200M - 4P - C
• Long Description:SH204M-C1 MiniCircuitBreaker

• Product Net Width:70 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.5 kg

• Standards:IEC/EN 60898-1
• Number of Poles:4
• Tripping Characteristic:C
• Rated Current (In):1 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:5.6 W at Rated Operating Conditions per Pole 1.4 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²,Tightening
• Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C,Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 %and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

General Information

Extended Product TypeSH204M-C1,6Product ID1SYS274011R0974Catalog DescriptionMiniature Circuit Breaker - SH200M - 4P - CLong DescriptionSH204M-C1,6 MiniCircuitBreaker
Dimensions

Product Net Width70 mmProduct Net Depth69 mmProduct Net Height88 mmProduct Net Weight0.5 kg
Technical

StandardsIEC/EN 60898-1Number of Poles4Tripping CharacteristicCRated Current (In)1.6 ARated Operational Voltageacc. to IEC 60898-1 400 V ACPower Loss6.4 W at Rated Operating Conditions per Pole 1.6 WRated Insulation Voltage (Ui)acc. to IEC/EN 60664-1 440 VOperational VoltageMaximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V ACRated Frequency (f)50 Hz,60 HzRated Short-Circuit Capacity (Icn)(400 V AC) 10 kAEnergy Limiting Class3Overvoltage CategoryIIIPollution Degree2Rated Impulse Withstand Voltage (Uimp)4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)Dielectric Test Voltage50 / 60 Hz, 1 min 2 kVHousing MaterialInsulation Group II, RAL 7035Actuator TypeToggleContact Position IndicationON / OFFDegree of ProtectionIP20RemarksIP40 in enclosure with coverElectrical Endurance20000 AC cycleMechanical Endurance20000 cycleTerminal TypeScrew TerminalsScrew Terminal TypeCage TerminalConnecting CapacityConductor 25 / 25 mm,Flexible with Ferrule 0.75 ... 16 mm,Flexible 0.75 ... 16 mm,Rigid 0.75 ... 25 mm,Stranded 0.75 ... 25 mmTightening Torque2 NmRecommended Screw DriverPozidriv 2Mounting on DIN RailTH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715Mounting PositionAny
Environmental

Ambient Air TemperatureOperation -25 ... +55 DegreeC,Storage -40 ... +70 DegreeCResistance to Shock acc. to IEC 60068-2-2725g / 2 shocks / 13 msResistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 InEnvironmental Conditions28 cycles with 55 DegreeC / 90-96 %and 25 DegreeC / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH204M-C2
• Product ID:1SYS274011R0024
• Catalog Description:Miniature Circuit Breaker - SH200M - 4P - C
• Long Description:SH204M-C2 MiniCircuitBreaker

• Product Net Width:70 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.5 kg

• Standards:IEC/EN 60898-1
• Number of Poles:4
• Tripping Characteristic:C
• Rated Current (In):2 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:7.2 W at Rated Operating Conditions per Pole 1.8 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C,Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycleswith 55 °C / 90-96 %and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH204M-C3
• Product ID:1SYS274011R0034
• Catalog Description:Miniature Circuit Breaker - SH200M - 4P - C
• Long Description:SH204M-C3 MiniCircuitBreaker

• Product Net Width:70 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.5 kg

• Standards:IEC/EN 60898-1
• Number of Poles:4
• Tripping Characteristic:C
• Rated Current (In):3 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:5.2 W at Rated Operating Conditions per Pole 1.3 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 %and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH204M-C6
• Product ID:1SYS274011R0064
• Catalog Description:Miniature Circuit Breaker - SH200M - 4P - C
• Long Description:SH204M-C6 MiniCircuitBreaker

• Product Net Width:70 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.5 kg

• Standards:IEC/EN 60898-1
• Number of Poles:4
• Tripping Characteristic:CRated Current (In):6 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:8 W at Rated Operating Conditions per Pole 2 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycleswith 55 °C / 90-96 %and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH204M-C10
• Product ID:1SYS274011R0104
• Catalog Description:Miniature Circuit Breaker - SH200M - 4P - C
• Long Description:SH204M-C10 MiniCircuitBreaker

• Product Net Width:70 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.5 kg

• Standards:IEC/EN 60898-1
• Number of Poles:4
• Tripping Characteristic:C
• Rated Current (In):10 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:8.4 W at Rated Operating Conditions per Pole 2.1 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 %and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH204M-C16
• Product ID:1SYS274011R0164
• Catalog Description:Miniature Circuit Breaker - SH200M - 4P - C
• Long Description:SH204M-C16 MiniCircuitBreaker

• Product Net Width:70 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.5 kg

• Standards:IEC/EN 60898-1
• Number of Poles:4
• Tripping Characteristic:C
• Rated Current (In):16 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:10 W  at Rated Operating Conditions per Pole 2.5 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 %and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH204M-C20
• Product ID:1SYS274011R0204
• Catalog Description:Miniature Circuit Breaker - SH200M - 4P - C
• Long Description:SH204M-C20 MiniCircuitBreak

• Product Net Width:70 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.5 kg

• Standards:IEC/EN 60898-1
• Number of Poles:4
• Tripping Characteristic:C
• Rated Current (In):20 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:10 W at Rated Operating Conditions per Pole 2.5 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 %and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH204M-C32
• Product ID:1SYS274011R0324
• Catalog Description:Miniature Circuit Breaker - SH200M - 4P - C
• Long Description:SH204M-C32 MiniCircuitBreaker

• Product Net Width:70 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.5 kg

• Standards:IEC/EN 60898-1
• Number of Poles:4
• Tripping Characteristic:C
• Rated Current (In):32 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:14.8 W at Rated Operating Conditions per Pole 3.7 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:10000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 %and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH204M-C25
• Product ID:1SYS274011R0254
• Catalog Description:Miniature Circuit Breaker - SH200M - 4P - C
• Long Description:SH204M-C25 MiniCircuitBreaker

• Product Net Width:70 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.5 kg

• Standards:IEC/EN 60898-1
• Number of Poles:4
• Tripping Characteristic:C
• Rated Current (In):25 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:12.8 W at Rated Operating Conditions per Pole 3.2 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any
• Environmental
• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 % and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH204M-C40
• Product ID:1SYS274011R0404
• Catalog Description:Miniature Circuit Breaker - SH200M - 4P - C
• Long Description:SH204M-C40 MiniCircuitBreaker

• Product Net Width:70 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.5 kg

• Standards:IEC/EN 60898-1
• Number of Poles:4
• Tripping Characteristic:C
• Rated Current (In):40 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:19.2 W at Rated Operating Conditions per Pole 4.8 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:10000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 %and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product TypeSH204M-C50
• Product ID1SYS274011R0504
• Catalog DescriptionMiniature Circuit Breaker - SH200M - 4P - C
• Long DescriptionSH204M-C50 MiniCircuitBreaker

• Product Net Width70 mm
• Product Net Depth69 mm
• Product Net Height88 mm
• Product Net Weight0.5 kg

• StandardsIEC/EN 60898-1
• Number of Poles4
• Tripping CharacteristicC
• Rated Current (In)50 A
• Rated Operational Voltageacc. to IEC 60898-1 400 V AC
• Power Loss13 W at Rated Operating Conditions per Pole 3.25 W
• Rated Insulation Voltage (Ui)acc. to IEC/EN 60664-1 440 V
• Operational VoltageMaximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f)50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn)(400 V AC) 10 kA
• Energy Limiting Class3
• Overvoltage CategoryIII
• Pollution Degree2
• Rated Impulse Withstand Voltage (Uimp)4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage50 / 60 Hz, 1 min 2 kV
• Housing MaterialInsulation Group II, RAL 7035
• Actuator TypeToggle
• Contact Position IndicationON / OFF
• Degree of ProtectionIP20
• RemarksIP40 in enclosure with cover
• Electrical Endurance10000 AC cycle
• Mechanical Endurance20000 cycle
• Terminal TypeScrew Terminals
• Screw Terminal TypeCage Terminal
• Connecting CapacityConductor 25 / 25 mm,Flexible with Ferrule 0.75 ... 16 mm,Flexible 0.75 ... 16 mm,Rigid 0.75 ... 25 mm,Stranded 0.75 ... 25 mm
• Tightening Torque2 Nm
• Recommended Screw DriverPozidriv 2
• Mounting on DIN RailTH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting PositionAny

• Ambient Air TemperatureOperation -25 ... +55 DegreeC Storage -40 ... +70 DegreeC
• Resistance to Shock acc. to IEC 60068-2-2725g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions28 cycles with 55 DegreeC / 90-96 %and 25 DegreeC / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

• Extended Product Type:SH204M-C63
• Product ID:1SYS274011R0634
• Catalog Description:Miniature Circuit Breaker - SH200M - 4P - C
• Long Description:SH204M-C63 MiniCircuitBreaker

• Product Net Width:70 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.5 kg

• Standards:IEC/EN 60898-1
• Number of Poles:4
• Tripping Characteristic:C
• Rated Current (In):63 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:19.2 W at Rated Operating Conditions per Pole 4.8 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:10000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 %and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH201M-D20
• Product ID:1SYS271011R0201
• Catalog Description:Miniature Circuit Breaker - SH200M - 1P - D
• Long Description:SH201M-D20 MiniCircuitBreaker

• Product Net Width:17.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.125 kg

• Standards:IEC/EN 60898-1
• Number of Poles:1
• Tripping Characteristic:D
• Rated Current (In):20 A
• Rated Operational Voltage:acc. to IEC 60898-1 230 / 400 V AC
• Power Loss:2.3 W at Rated Operating Conditions per Pole 2.3 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 253 V AC,Maximum 253 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(230 / 400 V AC) 6 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 %and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH202M-D20
• Product ID:1SYS272011R0201
• Catalog Description:Miniature Circuit Breaker - SH200 - 2P - D
• Long Description:SH202M-D20 MiniCircuitBreaker

• Product Net Width:35 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.25 kg

• Standards:IEC/EN 60898-1
• Number of Poles:2
• Tripping Characteristic:D
• Rated Current (In):20 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:4.6 W at Rated Operating Conditions per Pole 2.3 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 6 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 %and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:SH203M-D20
• Product ID:1SYS273011R0201
• Catalog Description:Miniature Circuit Breaker - SH200M - 3P - D
• Long Description:SH203M-D20 MiniCircuitBreaker

• Product Net Width:52.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.375 kg

• Standards:IEC/EN 60898-1
• Number of Poles:3
• Tripping Characteristic:D
• Rated Current (In):20 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
• Power Loss:6.9 W at Rated Operating Conditions per Pole 2.3 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC,Maximum 440 V AC,Minimum 12 V AC
• Rated Frequency (f):50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 6 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:2
• Rated Impulse Withstand Voltage (Uimp):4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Toggle
• Contact Position Indication:ON / OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Cage Terminal
• Connecting Capacity:Conductor 25 / 25 mm²,Flexible with Ferrule 0.75 ... 16 mm²,Flexible 0.75 ... 16 mm²,Rigid 0.75 ... 25 mm²,Stranded 0.75 ... 25 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles with 55 °C / 90-96 %and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product TypeSH204M-D20
• Product ID1SYS274011R0201
• Catalog DescriptionMiniature Circuit Breaker - SH200M - 4P - D
• Long DescriptionSH204-D20 MiniCircuitBreaker

• Product Net Width70 mm
• Product Net Depth69 mm
• Product Net Height88 mm
• Product Net Weight0.5 kg

• StandardsIEC/EN 60898-1
• Number of Poles4
• Tripping CharacteristicD
• Rated Current (In)20 A
• Rated Operational Voltageacc. to IEC 60898-1 400 V AC
• Power Loss9.2 W at Rated Operating Conditions per Pole 2.3 W
• Rated Insulation Voltage (Ui)acc. to IEC/EN 60664-1 440 V
• Operational VoltageMaximum (Incl. Tolerance) 440 V AC Maximum 440 V AC Minimum 12 V AC
• Rated Frequency (f)50 Hz,60 Hz
• Rated Short-Circuit Capacity (Icn)(400 V AC) 6 kA
• Energy Limiting Class3
• Overvoltage CategoryIII
• Pollution Degree2
• Rated Impulse Withstand Voltage (Uimp)4 kV(6.2 kV @ sea level)(5.0 kV @ 2000 m)
• Dielectric Test Voltage50 / 60 Hz, 1 min 2 kV
• Housing MaterialInsulation Group II, RAL 7035
• Actuator TypeToggle
• Contact Position IndicationON / OFF
• Degree of ProtectionIP20
• RemarksIP40 in enclosure with cover
• Electrical Endurance20000 AC cycle
• Mechanical Endurance20000 cycle
• Terminal TypeScrew Terminals
• Screw Terminal TypeCage Terminal
• Connecting CapacityConductor 25 / 25 mm,Flexible with Ferrule 0.75 ... 16 mm,Flexible 0.75 ... 16 mm,Rigid 0.75 ... 25 mm,Stranded 0.75 ... 25 mm
• Tightening Torque2 Nm
• Recommended Screw DriverPozidriv 2
• Mounting on DIN RailTH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715,TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting PositionAny

• Ambient Air TemperatureOperation -25 ... +55 DegreeC Storage -40 ... +70 DegreeC
• Resistance to Shock acc. to IEC 60068-2-2725g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions28 cycles with 55 DegreeC / 90-96 %and 25 DegreeC / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

• Extended Product TypeS201M-C20NA
• Product ID2CDS271103R0204
• Catalog DescriptionMiniature Circuit Breaker - S200M - 2P - C
• Long DescriptionSystem pro M compact S200M miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 10 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200M comply with IEC/EN 60898-1 and IEC/EN 609 47-2, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200M to save 50% space.

• Product Net Width35 mm
• Product Net Depth69 mm
• Product Net Height88 mm
• Product Net Weight0.25 kg

• StandardsIEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles2
• Tripping CharacteristicC
• Rated Current (In)20 A
• Rated Operational Voltageacc. to IEC 60898-1 230 V AC
  acc. to IEC 60947-2 230 V AC
• Power Loss5 W
  at Rated Operating Conditions per Pole 2.5 W
• Rated Insulation Voltage (Ui)acc. to IEC/EN 60664-1 440 V
• Operational VoltageMaximum (Incl. Tolerance) 253 V AC
  Maximum 253 V AC
  Minimum 12 V AC
  Minimum 12 V DC
• Rated Frequency (f)50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn)(230 V AC) 10 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu)(133 V AC) 25 kA
  (230 V AC) 15 kA
• Rated Service Short-Circuit Breaking Capacity (Ics)(133 V AC) 18.8 kA
• Energy Limiting Class3
• Overvoltage CategoryIII
• Pollution Degree3
• Rated Impulse Withstand Voltage (Uimp)4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage50 / 60 Hz, 1 min 2 kV
• Housing MaterialInsulation Group II, RAL 7035
• Actuator TypeInsulation group II, black, sealable
• Contact Position IndicationRed ON / Green OFF
• Degree of ProtectionIP20
• RemarksIP40 in enclosure with cover
• Electrical Endurance20000 AC cycle
• Mechanical Endurance20000 cycle
• Terminal TypeScrew Terminals
• Screw Terminal TypeFailsafe Bi-directional Cylinder-lift Terminal
• Connecting CapacityBusbar 10 / 10 mm
  Flexible with Ferrule 0.75 ... 25 mm
  Flexible 0.75 ... 25 mm
  Rigid 0.75 ... 35 mm
  Stranded 0.75 ... 35 mm
• Tightening Torque2 Nm
• Recommended Screw DriverPozidriv 2
• Mounting on DIN RailTH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
  TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting PositionAny

• Ambient Air TemperatureOperation -25 ... +55 DegreeC
  Storage -40 ... +70 DegreeC
• Resistance to Shock acc. to IEC 60068-2-2725g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-65g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions28 cycles
  with 55 DegreeC / 90-96 %
  and 25 DegreeC / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

• Extended Product Type:S202M-C20
• Product ID:2CDS272001R0204
• Catalog Description:Miniature Circuit Breaker - S200M - 2P - C
• Long Description:System pro M compact S200M miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 10 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200M comply with IEC/EN 60898-1 and IEC/EN 609 47-2, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200M to save 50% space.

• Product Net Width:35 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.25 kg

• Standards:IEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles:2
• Tripping Characteristic:C
• Rated Current (In):20 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
  acc. to IEC 60947-2 440 V AC
• Power Loss:5 W
  at Rated Operating Conditions per Pole 2.5 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 125 V DC
  Maximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Maximum 125 V DC
  Minimum 12 V AC
  Minimum 12 V DC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 25 kA
  (440 V AC) 15 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 18.8 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Insulation group II, black, sealable
• Contact Position Indication:Red ON / Green OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 10 / 10 mm²
  Flexible with Ferrule 0.75 ... 25 mm²
  Flexible 0.75 ... 25 mm²
  Rigid 0.75 ... 35 mm²
  Stranded 0.75 ... 35 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
  TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:S203M-C20NA
• Product ID:2CDS273103R0204
• Catalog Description:Miniature Circuit Breaker - S200M - 4P - C
• Long Description:System pro M compact S200M miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 10 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200M comply with IEC/EN 60898-1 and IEC/EN 609 47-2, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200M to save 50% space.

• Product Net Width:70 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.5 kg

• Standards:IEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles:4
• Tripping Characteristic:C
• Rated Current (In):20 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
  acc. to IEC 60947-2 440 V AC
• Power Loss:10 W
  at Rated Operating Conditions per Pole 2.5 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Minimum 12 V AC
  Minimum 12 V DC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 25 kA
  (440 V AC) 15 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 18.8 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Insulation group II, black, sealable
• Contact Position Indication:Red ON / Green OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 10 / 10 mm²
  Flexible with Ferrule 0.75 ... 25 mm²
  Flexible 0.75 ... 25 mm²
  Rigid 0.75 ... 35 mm²
  Stranded 0.75 ... 35 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
  TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:S204M-C20
• Product ID:2CDS274001R0204
• Catalog Description:Miniature Circuit Breaker - S200M - 4P - C
• Long Description:System pro M compact S200M miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 10 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200M comply with IEC/EN 60898-1 and IEC/EN 609 47-2, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200M to save 50% space.

• Product Net Width:70 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.5 kg

• Standards:IEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles:4
• Tripping Characteristic:C
• Rated Current (In):20 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
  acc. to IEC 60947-2 440 V AC
• Power Loss:10 W
  at Rated Operating Conditions per Pole 2.5 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 125 V DC
  Maximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Maximum 125 V DC
  Minimum 12 V AC
  Minimum 12 V DC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 25 kA
  (440 V AC) 15 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 18.8 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Insulation group II, black, sealable
• Contact Position Indication:Red ON / Green OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 10 / 10 mm²
  Flexible with Ferrule 0.75 ... 25 mm²
  Flexible 0.75 ... 25 mm²
  Rigid 0.75 ... 35 mm²
  Stranded 0.75 ... 35 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
  TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

• Extended Product Type:S201M-D16
• Product ID:2CDS271001R0161
• Catalog Description:Miniature Circuit Breaker - S200M - 1P - D
• Long Description:System pro M compact S200M miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,2P,3P,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200M comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 and CSA 22.2 No. 235, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200M to save 50% space.

• Product Net Width:17.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.125 kg

• Standards:IEC/EN 60898-1
  IEC/EN 60947-2
  UL 1077
• Number of Poles:1
• Tripping Characteristic:D
• Rated Current (In):16 A
• Rated Operational Voltage:acc. to IEC 60898-1 230 / 400 V AC
  acc. to IEC 60947-2 230 V AC
• Power Loss:2.5 W
  at Rated Operating Conditions per Pole 2.5 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 253 V AC
  Maximum (Incl. Tolerance) 72 V DC
  Maximum 253 V AC
  Maximum 72 V DC
  Minimum 12 V AC
  Minimum 12 V DC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(230 / 400 V AC) 6 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(133 V AC) 20 kA
  (230 V AC) 10 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(133 V AC) 15 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Insulation group II, black, sealable
• Contact Position Indication:Red ON / Green OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 10 / 10 mm²
  Flexible with Ferrule 0.75 ... 25 mm²
  Flexible 0.75 ... 25 mm²
  Rigid 0.75 ... 35 mm²
  Stranded 0.75 ... 35 mm²
• Tightening Torque:2.8 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:S202M-D16
• Product ID:2CDS272001R0161
• Catalog Description:Miniature Circuit Breaker - S200M - 2P - D
• Long Description:System pro M compact S200M miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 10 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200M comply with IEC/EN 60898-1 and IEC/EN 609 47-2, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200M to save 50% space.

• Product Net Width:35 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.25 kg

• Standards:IEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles:2
• Tripping Characteristic:D
• Rated Current (In):16 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
  acc. to IEC 60947-2 440 V AC
• Power Loss:5 W
  at Rated Operating Conditions per Pole 2.5 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 125 V DC
  Maximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Maximum 125 V DC
  Minimum 12 V AC
  Minimum 12 V DC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 25 kA
  (440 V AC) 15 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 18.8 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Insulation group II, black, sealable
• Contact Position Indication:Red ON / Green OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 10 / 10 mm²
  Flexible with Ferrule 0.75 ... 25 mm²
  Flexible 0.75 ... 25 mm²
  Rigid 0.75 ... 35 mm²
  Stranded 0.75 ... 35 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
  TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:S203M-D25
• Product ID:2CDS273001R0251
• Catalog Description:Miniature Circuit Breaker - S200M - 3P - D
• Long Description:System pro M compact S200M miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 10 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200M comply with IEC/EN 60898-1 and IEC/EN 609 47-2, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200M to save 50% space.

• Product Net Width:52.5 mm
• Product Net Depth:69 mm
• Product Net Height:88 mm
• Product Net Weight:0.375 kg

• Standards:IEC/EN 60898-1
  IEC/EN 60947-2
• Number of Poles:3
• Tripping Characteristic:D
• Rated Current (In):25 A
• Rated Operational Voltage:acc. to IEC 60898-1 400 V AC
  acc. to IEC 60947-2 440 V AC
• Power Loss:9.3 W
  at Rated Operating Conditions per Pole 3.1 W
• Rated Insulation Voltage (Ui):acc. to IEC/EN 60664-1 440 V
• Operational Voltage:Maximum (Incl. Tolerance) 440 V AC
  Maximum 440 V AC
  Minimum 12 V AC
  Minimum 12 V DC
• Rated Frequency (f):50 Hz
  60 Hz
• Rated Short-Circuit Capacity (Icn):(400 V AC) 10 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 25 kA
  (440 V AC) 15 kA
• Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 18.8 kA
• Energy Limiting Class:3
• Overvoltage Category:III
• Pollution Degree:3
• Rated Impulse Withstand Voltage (Uimp):4 kV
  (6.2 kV @ sea level)
  (5.0 kV @ 2000 m)
• Dielectric Test Voltage:50 / 60 Hz, 1 min: 2 kV
• Housing Material:Insulation Group II, RAL 7035
• Actuator Type:Insulation group II, black, sealable
• Contact Position Indication:Red ON / Green OFF
• Degree of Protection:IP20
• Remarks:IP40 in enclosure with cover
• Electrical Endurance:20000 AC cycle
• Mechanical Endurance:20000 cycle
• Terminal Type:Screw Terminals
• Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal
• Connecting Capacity:Busbar 10 / 10 mm²
  Flexible with Ferrule 0.75 ... 25 mm²
  Flexible 0.75 ... 25 mm²
  Rigid 0.75 ... 35 mm²
  Stranded 0.75 ... 35 mm²
• Tightening Torque:2 N·m
• Recommended Screw Driver:Pozidriv 2
• Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
  TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
• Mounting Position:Any

• Ambient Air Temperature:Operation -25 ... +55 °C
  Storage -40 ... +70 °C
• Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms
• Resistance to Vibrations acc. to IEC 60068-2-6:5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
• Environmental Conditions:28 cycles
  with 55 °C / 90-96 %
  and 25 °C / 95-100 %

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Extended Product Type:T4N PR222DS/P-LSIG In=320 3p F F
• Catalog Description:T4N PR222DS/P-LSIG In=320 3p F F
• Long Description:C.BREAKER TMAX T4N FIXED THREE-POLE WITH FRONT TERMINALS AND SOLID-STATE RELEASE IN AC PR222DS/P-LSIG R

• Product Net Width:105 mm
• Product Net Height:205 mm
• Product Net Depth:103.5 mm
• Product Net Weight:3.5 kg

• Electrical Durability:6000 cycle
  120 cycles per hour
• IIT Publishing Status:Level 0 - Information enabled
• Mechanical Durability:20000 cycle
  240 cycles per hour
• Number of Poles:3
• Power Loss:at Rated Operating Conditions per Pole 17,6 W
• Product Main Type:SACE Tmax T
• Product Name:Moulded Case Circuit Breaker
• Product Type:CB
• Rated Current (In):Main Circuit 320 A
• Rated Impulse Withstand Voltage (Uimp):8 kV
• Rated Insulation Voltage (Ui):1000 V
• Rated Operational Voltage:690 V AC
• Rated Service Short-Circuit Breaking Capacity (Ics):(220 V AC) 70 kA
  (230 V AC) 70 kA
  (380 V AC) 36 kA
  (400 V AC) 36 kA
  (415 V AC) 36 kA
  (440 V AC) 30 kA
  (500 V AC) 25 kA
  (690 V AC) 20 kA
• Rated Ultimate Short-Circuit Breaking Capacity (Icu):(220 V AC) 7 kA
  (230 V AC) 7 kA
  (380 V AC) 36 kA
  (400 V AC) 36 kA
  (415 V AC) 36 kA
  (440 V AC) 30 kA
  (500 V AC) 25 kA
  (690 V AC) 20 kA
  (250 V DC) 2 Poles in Series 36 kA
  (250 V DC) 3 Poles in Series 25 kA
  (500 V DC) 3 Poles in Series 16 kA
• Rated Uninterrupted Current (Iu):320 A
• Release Type:EL
• Standards:IEC 60947
• Sub-type:T4
• Suitable For:T4
• Suitable for Product Class:Moulded Case Circuit Breakers
• Terminal Connection Type:Fixed Circuit-Breakers
  Front
• Version:F

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other